Department of Industrial and Systems Engineering


List of Research Outputs by Academic Staff (1999-2000)

(Authors not Members of the Department are in bracket)
 
Scholarly Books and Monographs  
   
Edited book (editor)  
   
1Employee Training and Development, Quality Transformation Series.  City University of Hong Kong, Hong Kong, 64pp (2000) YUNG, K.C
2International Journal of Quality & Reliability Management.  Vol. 17(2), MCB University Press, Bradford, England, 112pp (2000) ISBN 0265- 671X  TSANG, ALBERT H.C. and  TANG, C.Y.
3Strategic Information Systems in Small and Medium Enterprises (Part I), Logistics Information Management.  Vol. 13, MCB University Press, UK, 116pp (2000)  (GUNASEKARAN, A.) and  CHUNG, W.C.C.
   
Journal Articles, Book Chapters, and other Published Papers  
   
Chapter in an edited book (author)  
   
1"Computer-aided design and manufacturing".  In Richard Dorf, ed.,  Handbook of Technology Management,  CRC Press LLC/IEEE Press, Canada, pp.13-64-13-68 (1999) NOORI, H.
   
Article for externally refereed journal  
   
1"355 nm Nd:YAG laser ablation of polyimide and its thermal effect".  Journal of Materials Processing Technology,  Vol. 101, No. 1-3, pp. 306-311 (2000) YUNG, WINCO K.C., LIU, J.S., MAN, H.C. and  YUE, T.M.
2"A Comparison of MTM and RTM".  Work Study,  Vol. 48, No. 2, pp.57-61 (1999) CHOI, C.K. and  IP, W.H.
3"A design of ABC template for easy assimilation".  Logistics Information Management,  Vol. 13, No. 3, pp.126-137 (2000) (www. emerald-library.com, pp.126-137) CHAN, M.F.S.*, (KEUNG, K.F.) and CHUNG, W.C.C.
4"A fast solution to identify placement parameters for modular platform manipulators". Journal of Robotic Systems,  Vol. 17, No. 5, pp.251-253 (2000) JI, P. and  WU, H. T.
5"A generic framework for supporting Internet services to achieve customer value creation". International Journal of Engineering with Computers,  Vol. 16, pp.53-62 (2000) NOORI, H., LAU, C.W. and  (WONG, T.N.)
6"A model for an integrated manufacturing system implementation in China". Journal of Engineering and Technology Management,  Vol. 16, pp. 83-101 (1999)  (TSENG, H.C.), IP, W.H. and NG, K.C.*
7"A multi-spectrum analysis of surface roughness formation in ultra-precision machining". Precision Engineering,  Vol. 24, No. 1, pp.77-87 (2000) CHEUNG, C.F.* and  LEE, W.B.
8"A new elasto-plastic damage variable and its application".  Journal of Huazhong University of Science and Technology,  Vol. 27, No. 9, pp.1-3 (1999) (SHEN, W.), TANG, C.Y., (PENG, L.H.) and  (LI, C.C.)
9"A paradigm for ERP and BRP integration". Journal of Production Research,  Vol. 37, No. 9, pp.2093-2108 (1999) NG, K.C.*, IP, W.H. and LEE, T.C.
10"A self-assessed quality management system based on integration of MBNQA/ISO9000/ ISO14000". International Journal of Quality and Reliability Management, Vol. 16, No. 6, pp. 606-629 (1999) (PUN, K.F.), (CHIN, K.S.) and  LAU, C.W.
11"A simplified approach for the simulation of metal flow in a cylindrical  sleeve diecasting cavity".  Journal of Materials Processing  Technology, Vol. 91, pp.116-120 (1999) LU, H.Y.* and  LEE, W.B.
12"A study of sStrain localization in the fine-blanking process using the large deformation finite element method".  Journal of Materials Processing Technology,  Vol. 86, pp.163-167 (1999) CHEN, Z.H., TANG, C.Y., LEE, T.C. and  CHAN, L.C.
13"A study of surface finishing in pulse current electroforming by utilizing different shaped waveforms".  Surface and Coating Technology,  Vol. 115, pp.132-139 (1999) WONG, K.P.*, CHAN, K.C. and  YUE, T.M.
14"A study on the precision modeling of the bars produced in two cross-bar straightening ".  Journal of Materials Processing Technology ,  Vol. 99, pp.202-206 (2000) (WU, B.J.), CHAN, L.C., LEE, T.C. and  (AO, L.W.)
15"A theoretical and experimental investigation of surface roughness formation in ultra-precision diamond turning". International Journal of Machine Tools and Manufacture,  Vol. 40, No. 7, pp.979-1002 (2000) CHEUNG, C.F.* and  LEE, W.B.
16"An intelligent Internet information delivery system to evaluate site preferences". International Journal of Expert System with Applications,  Vol. 18, No. 1, pp.33-42 (2000) (March) (IP, R.), LAU, C.W. and (CHAN, F.)
17"An investigation of cutting dynamics in single point diamond turning".  JSME International Journal- Series C: Mechanical Systems, Machine Elements and Manufacturing, Vol. 43, No. 1, pp.116-126 (2000) CHEUNG, C.F.* and  LEE, W.B.
18"An investigation of residual form error compensation in the ultra-precision machining of aspheric surfaces".  Journal of Materials Processing Technology,  Vol. 99, No. 1-3, pp.129-134 (2000) LEE, W.B., CHEUNG, C.F., CHIU, W.M. and  LEUNG, T.P.
19"An investigation of stochastic analysis of flexible manufacturing systems simulation". Int. J. of Advanced Manufacturing Technology,  Vol. 15, pp.244 -250 (1999) IP, W.H., (FUNG, R.) and  KEUNG, K.W.*
20"An investigation of tool wear in the dam-bar cutting of integrated circuit packages". Wear, Vol. 237, No. 2, pp.274-282 (2000) CHEUNG, C.F., LEE, W.B. and CHIU, W.M.
21"Analysis of the dynamic characteristics of gas flow inside a laser cut kerf under high cut assist gas pressure".  Journal of Physics : D: Applied Physics,  Vol. 32, No. 13, pp.1469-1477 (1999) MAN, H.C., DUAN, J. and YUE, T.M.
22"Assessment of individual, organisational and environmental variables in the implementation of business process design". The International Journal of Business Performance Management,  Vol. 1, No. 4, pp.388-402 (2000) CHAN, W.Q.* and  YUNG, K.L.
23"Cavitation erosion and pitting corrosion behaviour of laser surface-melted martensitic stainless steel UNSS42000".  Surface and Coating Technology,  Vol. 126, No. 2-3, pp.238-255 (2000) KWOK, C.T., MAN, H.C. and  CHENG, F.T.
24"Characterization of the orientation structure and distribution in rolled polypropylene". Polymer materials Science and Engineering,  Vol. 16, No. 2, pp.62-66 (2000) WU, S.Z.* and  LEE, W.B.
25"Considerations for using cellular manufacturing". Materials Processing Technology,  Vol. 96, pp.182-187 (1999) CHAN, C.Y., LAM, F.W. and  (LEE, C.P.)
26"Deformation and cavitation behaviour of a high-strain-rate superplastic Al2009/20 Sicw composite".  Materials Letter,  Vol. 44, pp.39-44 ( 2000) CHAN, K.C. and  TONG, G.Q.
27"Design comprises of multi-function tools for both in-situ detection and particle return from asteroid".  Advanced Space Research,  Vol. 25, No. 2, pp.323-328 (2000) YUNG, K.L., (NG, T.C.), YU, C.H. and  (CHAN, C.C.)
28"Design for manufacturing: a dimensioning aspect". Journal of Materials Processing Technology,  Vol. 91, No. 1-3, pp.121-127 (1999) JI, P. and  LAU, K. H.
29"Design targets determination for inter-dependent product attributes in QFD using Fuzzy inference".  Journal of Integrated Manufacturing,  Vol. 10, No. 6, pp.376-383 (1999) (FUNG, R.), (LAW, S.T.) and IP, W.H.
30"Detection of interference elements and release directions in die-cast and injection-moulded components".  Proceedings of the Institution of Mechanical  Engineers, Journal of Engineering Manufacture,  Vol. 214, No. B6, pp.431-442 (2000) LU, H.Y.* and  LEE, W.B.
31"Developing breakthrough products: challenges and options for market assessment". Journal of Operations Management,  Vol. 17, pp.613-630 (1999) (DESZCA, G.), (MUNRO, H.) and  NOORI, H.
32"Developing the right breakthrough product/service: an umbrella methodology - part A".  International Journal of Technology Management,  Vol. 17, No. 5, pp.544-562 (1999) NOORI, H., (MUNRO, H.), (DESZCA, G.) and  (MCWILLIAMS, B.)
33"Developing the right breakthrough product/service: application of the umbrella methodology to electric vehicles - part B". International Journal of Technology Management,  Vol. 17, No. 5, pp.563-579 (1999) NOORI, H., (MUNRO, H.), (DESZCA, G.) and  (MCWILLIAMS, B.)
34"Development of a damage-based criterion for ductile fracture prediction in sheet metal forming".  Journal of Materials Processing Technology,  Vol. 91, pp.270-277 (1999) TANG, C.Y., (CHOW, C.L.), SHEN, W. and  (TAI, W.H.)
35"Development of an architecture of a hybrid manufacturing information system".   International Journal of Engineering with Computers,  Vol. 16, pp.1-9 (2000) CHUNG, W.W.C. and  LAU, C.W.
36"Die-swell behaviour of glass bead-filled low density polyethylene hybrid composite melts at high extrusion rates". Journal of Applied Polymer Science,  Vol. 76, pp.419-424 (2000) (LIANG, J.Z.), (LI, R.K.Y.), TANG, C.Y. and (CHEUNG, S.W.)
37"Early stages of phase transformation in quenched zinc-aluminium based alloys". Journal of Materials Processing Technology,  Vol. 94, pp.78-84 ( 1999) (ZHU, Y.H.), (MURPHY, S.) and  YEUNG, C.F.
38"Effect of crystal rotation of springback of integrated circuit leadframes".   Textures and Microstructures,  Vol. 34, pp.23-32 (2000) CHAN, K.C. and  WANG, S.H.
39"Effect of crystallographic orientation in diamond turning of copper single crystals". Scripta Materialia,  Vol. 42, No. 10, pp.937-945 (2000) LEE, W.B., TO, S. and CHEUNG, C.F.
40"Effect of electric and magnetic fields on plasma control during CO2 laser welding". Optics and Lasers in Engineering,  Vol. 32, No. 1, pp.55-63 (1999) TSE, H.C.*, MAN, H.C. and YUE, T.M.
41"Effect of electric field on plasma control during CO2 laser welding".  Optics and Lasers in Engineering,  Vol. 33, No. 3, pp.181-189 (2000 ) TSE, H.C.*, MAN, H.C. and YUE, T.M.
42"Effect of homogenization treatment on the segregation of silicon in ferritic ductile irons".  Materials Science and Technology,  Vol. 15, pp.733-737 (1999) YEUNG, C.F., ZHAO, H. and LEE, W.B.
43"Effect of machining velocity on the crystallographic texture in a diamond turned aluminium single crystal".  Textures and Microstructions,  Vol. 31, No. 4, pp.249-261 (1999) TO, S., LEE, W.B. and (CHAN, C.Y.)
44"Effect of magnetic field on plasma control during CO2 laser welding".  Optics and Laser Technology,  Vol. 31, No. 5, pp.363-368 (1999) TSE, H.C.*, MAN, H.C. and YUE, T.M.
45"Effect of microstructures on deformation behaviour of aluminium matrix composites in laser bending ".  Textures and Microstructures,  Vol. 34, pp.43-54 (2000) CHAN, K.C. and  LIANG, J.
46"Effects of recycling on morphology and mechanical properties of a semi- aromatic Rodrun LC-5000 liquid crystalline polymer". Polymer International,  Vol. 49, No. 3, pp.248-252 (2000) XU, Q.W.* and  MAN, H.C.
47"Enhancing manufacturing information management through TQM".  Logistics Information Management,  Vol. 12, No. 4, pp.315-324 (1999) IP, W.H., (CHAU, K.Y.) and  (YAM, R.C.M.)
48"Exothermic reaction in eutectoid Zn-Al based alloys".  Materials Science and Engineering A-Structure,  Vol. 268, No. 1-2, pp.147-153 (1999 ) ZHU, Y.H., MAN, H.C. and LEE, W.B.
49"Factory on demand: the shaping of an agile production system".  International Journal of Agile Management Systems,  Vol. 1, No. 2, pp.83 -87 (1999) LEE, W.B. and  LAU, C.W.
50"Formulation of a strain based orthotropic elasto-plastic damage theory ".  International Journal of Damage Mechanics, Vol. 9, No. 2, pp.174-191 (2000) CHAN, L.C., LEE, T.C., FAN, J.P. and  TANG, C .Y.
51"High-strain-rate superplasticity of an Al-4.4Cu-1.5Mg/21/SiCw composite sheet".  Materials Science and Engineering A,  Vol. 286, pp.218-224 (2000) TONG, G.Q. and  CHAN, K.C.
52"In-line process conditions monitoring expert system for injection molding". Journal of Materials Processing Technology,  Vol. 101, No. 1-3, pp. 268-274 (2000) (March) (CHAN, F.), LAU, C.W. and  (JIANG, B.)
53"Internet-based collaborative design and manufacturing". China Mechanical Engineering,  Vol. 10, No. 8, pp.882-885 (1999) LAU, K.H., QIN, Y., LEE, W.B., (CHEN, X.), (YU, Z.Q.) and (SUN, J.)< /td>
54"JIT production planning approach with fuzzy due date for OKP manufacturing systems". International Journal of Production Economics,  Vol. 58, pp.209-215 ( 1999) (WANG, W.), (WANG, D.) and IP, W.H.
55"Laser bending of an Al6013/SiCp aluminium matrix composite sheets".  Journal of Materials Processing Technology,  Vol. 100, pp.214-218 ( 2000) CHAN, K.C. and  LIANG, J.
56"Laser bending of thin stainless steel sheets". Journal of Laser Applications, Vol. 12, pp.34-40 (2000) CHAN, K.C., YAU, C.L.* and  LEE, W.B.
57"Laser processing-induced phase transformation in Zn-Al based alloy".  Journal of Materials Research,  Vol. 14, No. 11, pp.4188-4194 (1999) (ZHU, Y.H.), (CHAVEZ-CARVAYAR, J.A.), MAN, H.C. and  ( VILLAGRAN, M.)
58"Managing the maintenance performance of an electric utility".  New Engineering Journal,  Vol. 2, No. 3, pp.22-29 (1999) TSANG, A.H.C. and (BROWN, W.L.)
59"Manufacturing integration: a systems engineering perspective".  Journal of Business Performance Management,  Vol. 1, No. 3, pp.265-279 (1999)< /font> IP, W.H., NG, K.C.*, LEE, T.C. and (TSENG, C.)
60"Materials damage and forming limits of textured sheet metals".  Journal of Materials Processing Technology,  Vol. 99, pp.135-140 (2000 ) TANG, C.Y. and  (TAI, W.H.)
61"Measuring maintenance performance: a holistic approach".  International Journal of Operations & Production Management,  Vol. 19, No. 7, pp.691-715 (1999) TSANG, A.H.C., (JARDINE, A.K.S.) and  (KOLODNY, H.)
62"Modeling of air back pressure in diecasting dies".  Journal of  materials processing technology,  Vol. 91, pp.264-269 (1999) LEE, W.B. and  LU, H.Y.*
63"Modelling and simulation of surface topography in ultra-precision diamond turning". Proceedings of the Institution of Mechanical Engineers, Journal of Engineering Manufacture,  Vol. 214, No. B6, pp.463-480 (2000) CHEUNG, C.F.* and  LEE, W.B.
64"Nonlinear damage field in vicinity to mode-I crack tip".  Journal of Huazhong University of Science and Technology, Vol. 27, No. 9, pp.4-6 (1999) (SHEN, W.), TANG, C.Y., (PENG, L.H.) and  (LI, C.C.)
65"On the role of CuAl2 precipitates in pitting corrosion of aluminium 2009/SiCw metal matrix composite".  Journal of Materials Science Letter, Vol. 19, No. 11, pp.1003-1006 (2000) YUE, T.M., WU, Y.X. and MAN, H.C.
66"Optimisation of Nd-YAG laser welding of superduplex stainless steel by parameter design". Science and Technology of Welding and Joining,  Vol. 4, No. 4, pp. 262-232 (1999) YIP, W.M.*, MAN, H.C. and IP, W.H.
67"Orientation hardening and instability of an AA3003 aluminium alloy sheet under in-plane strain stretching".  Scripta mater,  Vol. 43, pp.1-7 ( 2000) WEN, X.Y.* and  LEE, W.B.
68"Review of research in the determination of process parameters for plastic injection molding".  Advances in Polymer Technology,  Vol. 18, No. 3, pp.225-236 (1999) MOK, S.L.*, KWONG, C.K. and  (LAU, W.S.)
69"SCADA in an integrated maintenance management system".  Journal of Quality in Maintenance Engineering,  Vol. 6, No. 1, pp.6-19(2000) IP, W.H., LEE, K.C.,* YUNG, K.L., (YAM, R.)
70"Second order tensor and stiffness degradation of aluminum alloy 2024T3 under large strain at room temperature". Journal of Mechanical Science,  Vol. 42, pp.87-105 (2000) TANG, C.Y., SHEN, W., FUNG, L.C.* and  LEE, T.C.
71"Simulation of the sheet metal extrusion process by the enhanced assumed strain finite element method".  Journal of Materials Processing Technology,  Vol. 91, pp.250-256 (1999) CHEN, Z.H., TANG, C.Y., CHAN, L.C. and  LEE, T.C.
72"Strength prediction of composite laminates with multiple elliptical holes".   International Journal of Solids and Structures,  Vol. 37, No. 21, pp.2887-2900 (2000) XU, X.W., MAN, H.C. and YUE, T.M.
73"Task allocation using case-based reasoning for distributed manufacturing systems".   Logistics Information Management,  Vol. 13, No. 3, pp.167- 176 (2000) CHOY, K.L. and  LEE, W.B.
74"The application of GA in FMS tool selection problem". Journal of Manufacturing Systems, CIRP,  Vol. 29, No. 3, pp.225-227 (1999) KEUNG, K.W.* and IP, W.H.
75"The design and fabrication of an alumina reinforced aluminum composite material". Composites Part A-Applied Science and Manufacturing,  Vol. 31 (3), pp. 245-258 (2000) YU, X.X.* and  LEE, W.B.
76"The design of an ultrasonic polishing tool by the transfer-matrix method".   Journal of Materials Processing Technology,  Vol. 102, No. 1-3, pp.122-127 (2000) (GUO, Z.N.), LEE, T.C., YUE, T.M. and  (LAU, W.S.)
77"The design, manufacture and experiment of Axilens (in Chinese)".  Journal of Laser Technology,  Vol. 24, No. 3, pp.1-7 (1999) ZHAO, B., CHIU, W.M. and LEE, W.B.
78"The effects of laser surface treatment on the corrosion properties of Ti-6A1-4V alloy in Hank's solution".  Journal of Materials Science Letter,  Vol. 19, No. 3, pp.205-208 (1999) YUE, T.M., CHENG, T.M.* and  MAN, H.C.
79"The grain shape dependence of springback of integrated circuit leadframes". Materials Science and Engineering A,  Vol. 270, pp.323-329 (1999) CHAN, K.C. and  WANG, S.H.
80"The implementation of a model for integration of MRP II and TQM".  Integrated Manufacturing Systems,  Vol. 10, No. 5, pp.298-305 (1999) CHAN, D.C.K.*, YUNG, K.L. and  IP, W.H.
81"The process of quality transformation in Hong Kong industries".  International Journal of Management,  Vol. 17, No. 2, pp.175-183 (2000) (PUN, K.F.), (CHIN, K.S.), (GILL, R.) and  LAU, C.W.
82"TPM implementation in China: a case study". International Journal of Quality & Reliability Management,  Vol. 17, No. 2, pp.144-157 (2000) TSANG, A.H.C. and  CHAN, P.K.*
83"Value challenge in supply chain management" Logistics Information Management, Vol. 13, No. 3, pp.150-155 (2000) (POON, W.K.) and  LAU, K.H.
84"Wear characteristics and mechanisms of thin edge cutter blade".  Journal of Materials Processing Technology,  Vol. 102, pp.203-207 (2000) LAU, K.H., YEUNG, C.F., MAN, H.C. and  (MEI, D.)
85"Within the Canadian boundaries: a close look at the Canadian industries implementing continuous improvement".  TQM Magazine,  Vol. 11, No. 3, pp.188-197 (1999) NOORI, H., (JHA, S.) and  (MICHELA, J.)
   
Article for policy or professional journal  
   
1"A methodology for the integration of computer systems in manufacturing".  Annual Journal of Institute of Industrial Engineers (Hong Kong),  pp.25-28 (1999-2000) (November) LAU, C.W.
2"Optimization of Computerized Cutting System".  Textile Asia,  Vol. 30, No. 1, pp.29-31 (1999) WONG, W.K., CHAN, C.K. and  IP, W.H.
   
Article for newspaper or popular journal  
   
1"Applications of conductive polymers in electrical appliance industry".  Plastics Network,  No. 5, pp.23-26 (1999) TSUI, C.P.* and  TANG, C.Y.
2"Ecodesign". Plastics Network,  Vol. 8, No. 1-2, pp.27-27 (2000) CHOI, C.K.
   
Conference and Working Papers  
   
Refereed paper at a conference  
    
1"A completed tool control system for flexible manufacturing cells".  14th Triennial World Congress,  Beijing, China, 1999, IFAC, China, pp.273-278 (1999) (IP, R.), (CHAN, F.) and LAU, C.W.
2"A customer-driven information flow mechanism for supply chain network".  International Conference on Global Supply Chain Management: Into the  21st Century,  CUHK, 13-14 August 1999, CUHK, pp.30-33 (1999) LAU, C.W., CHUNG, W.W.C. and  NING, A.
3"A decision support prototype for inventory control".  Proceedings of the 5 th Conference of International Society for Decision Support Systems ( ISDSS '99),  Melbourne, 20-23 July 1999, Monash University, CDROM ISBN 0-7326-2074-0@1999, pp.Session 5-B2 (1999) CHAN, H.S.E.*, CHAN, S.F.M.* and  CHUNG, W.W.C.
4"A Framework of a virtual machining and inspection  system  for diamond turning of precision  optics".  In Prof. M.S.J. Hashmin and Dr. L. Loohey, eds.,  Proceedings of the International Conference on Advances in Materials and Processing Technologies, AMPT'99 and 16th Annual Conference  of the Irish Manufacturing Committee, IMC16.,  Vol. III, Dublin, Ireland, 3-6 August, Dublin  City University, Dublin, pp.1675-1687 (1999) CHEUNG, C.F. and  LEE, W.B.
5"A generic object-based support system for manufacturing process".  26th International Conference on Computers & Industrial Engineering,  Vol. 1, Melbourne, Australia, December 1999, pp.199-205 (1999) LAU, C.W., NING, A., (CHAN, F.) and  (IP, R.)
6"A model for process re-development in a small and medium enterprise".  Proceedings Vol 2 of papers presented in the Portland International Conference on Management of Engineers and Technology (PICMET'99),  Portland, Oregon, USA, 25-29 July 1999, CDROM ISBN 1-890843-04-0, USA, pp.21-paper 14 (1999) (WONG, T.S.) and CHUNG, W.W.C.
7"A parametric analysis of surface quality in diamond turning of an A16061/SiCp metal matrix composite".  In T.X. Yu, Q.P. Sun & J.K. Kim, ed. ,  Proceedings of the 5th Asia-Pacific Symposium on Advances in Engineering Plasticity and Its Applications (AEPA2000) in Key Engineering Materials,  Vol. 177-180, Hong Kong, 12-16 June 2000, Trans Tech Publications Ltd, Switzerland, pp.369-374 (2000) CHAN, K.C., RAMESH, M.V., LEE, W.B. and  CHEUNG, C.F.
8"An intelligent hybrid system for initial process parameter setting of injection moulding".  In Hillery, M.T. and Lewis, H.J., eds.,  15th International Conference of Production Research,  Vol. 1, Ireland, 9-12 Aug. 1999, Department of Manufacturing and Operations Engineering, University of Limerick, Limerick, Ireland, Ireland, pp.185-190 (1999) MOK, S.L.*, KWONG, C.K. and  (LAU, W.S.)
9"An Internet-integrated manufacturing system prototype".  In Hui, C. K. and Lee, D. L., eds.,  5th International Computer Science Conference (ICSC'99),  Hong Kong, December 13-15, Springer, pp.409-414 (1999) (Organized by IEEE Hong Kong Section, Computer Chapter.) CHAN, C. F., NG, V., YU, K. M. and  AU, A.
10"An investigation of solid-based filling analysis on plastic injection product design".   Proceeding of 2000 International conference on Advanced Manufacturing Systems and Manufacturing Automation,  GuangZhou, June 19-21, 2000, Guangdong People's Publishing House, GuangZhou, China, pp.466-470 (2000) LAU, K.H. and  CHAN, K.W.*
11"An investigation of surface roughness formation in ultra-precision machining of A 16061/SiCp metal matrix composite".  In T.X. Yu, Q.P. Sun & J.K. Kim, ed.,  Proceedings of the 5th Asia-Pacific Symposium on Advances in Engineering  Plasticity and Its Applications  (AEPA2000) in Key Engineering Materials,  Vol. 177-180, Hong Kong, 12-16 June 2000, Trans Tech Publications Ltd, Switzerland, pp.375-380 (2000) CHEUNG, C.F., CHAN, K.C., LEE, W.B., RAMESH, M.V.< /u> and TO, S.
12"An online performance evaluation of partners selection in collaborative manufacturing network".  AMSMA 2000 International Conference,  Guangdong University of Technology, China, 19-21 June 2000, pp.253-257 (2000) LAU, C.W., LEE, W.B. and CHEUNG, C.Y.
13"Application of damage mechanics in strength analysis of glass beads filled thermoplastics".  In David Hui, ed.,  The 6th International Conference on Composites Engineering,  Florida, U.S.A., 27 June 1999  - 3 July 1999, U.S.A., pp.829-830 (1999) TANG, C.Y., TSUI, C.P.*, LEE, T.C. and  (WONG, A.C.Y.)
14"Application of virtual validation in product design".  International Conference on Advanced Manufacturing Systems and Manufacturing Automation 2000,  Guangzhou, China, June 19-20, 2000, Guangdong People's Publishing House, Guangzhou, China, pp.274-277 (2000) CHAN, C.K.* and  LAU, K.H.
15"Case based reasoning approach to concurrent design of low power transformers ".  In Hillery, M.T. and Lewis, H.J., eds.,  15th International Conference of Production Research,  Vol. 1, Ireland, 9-12 Aug. 1999, Department of Manufacturing and Operations Engineering, University of Limerick, Limerick, Ireland, Ireland, pp.227-232 (1999) KWONG, C.K., MOK, S.L.* and  TAM, S.M.
16"Determining the cycle time for PCB assembly by the B&B algorithm".  2000 International Conference on Industry, Engineering and Management Systems,  Cocoa Beach, Florida, USA, 13 - 15, March, 2000, (2000) WAN, S.* and  JI, P.
17"Development of a web-based 3D CAD system for geometry creation".  In Chiang Industrial Charity Foundation, ed.,  Proceeding of 2000 International Conference on Advanced Manufacturing Systems and Manufacturing Automation,  Vol. 3, Beijing, China, Oct 31 - Nov 3, 1999, Chiang Industrial Charity Foundation, Hong Kong, pp./-/ (1999) (CD) CHAN, K.W.*, LAU, K.H. and  LEE, W.B.
18"Development of an intelligent material handling equipment selection system".   26th International Conference on Computers & Industrial Engineering,  Melbourne, Australia, December 1999, pp.260-265 (1999) (CHAN, F.), (IP, R.) and LAU, C.W.
19"Dimension-driven parameteized design of free form objects".  In Martin, R. and Wang, W., eds.,  Geometric Modeling and Processing 2000: Theory and Applications,  Hong Kong, April 10-12, IEEE Computer Society, Hong Kong, pp.90- 100 (2000) YU, K.M. and  ZHU, W.M.*
20"Distributed parametric path planning for virtual reality".  Proceedings of Computer-Aided Industrial Design and Conceptual Design (CAID&CD'99),  Hangzhou, China, 20-22 July, 1999, pp.193-200 (1999) JI, P. and  TU, L.Z.
21"Dual control of precision closed-loop stepping motor servo".  Proceedings of The IEEE 1999 International Conference on Power Electronics and Drive Systems,  Vol. 2, Hong Kong, 27-29 July 1999, IEEE, Hong Kong, pp.803-808 ( 1999) YUNG, K.L. and  (MAK, S.T.)
22"Effects of fine-particle addition on plasticity of polymer composites".  In T.X.Yu, Q.P. Sun & J.K. Kim, ed.,  Proceedings of the 5 th  Asia-Pacific Symposium on Advances in Engineering  Plasticity  and Its Applications (AEPA 2000) in Key Engineering Materials ,  Vol. 177-180, Hong Kong, 12-16 June 2000, Trans Tech Publications Ltd, Switzerland, pp.345-350 (2000) TSUI, C.P.*, TANG, C.Y. and  LEE, T.C.
23"Experimental study on large deformation in fine-blanking process by implementing different stripper designs: vee-ring type Vs. plate-type".  In T.X. Yu, Q.P. Sun & J. K. Kim, ed.,  Proceedings of the 5th Asia- Pacific  Symposium  on  Advances in Engineering Plasticity and Its Applications (AEPA2000) in Key Engineering Materials,  Hong Kong, 12-16 June 2000, Trans Tech Publications Ltd, Switzerland, pp.529-534 (2000) CHAN, L.C., (WU, B.J.), LEE, T.C. and  LEUNG, Y.C.
24"Flexible workflow integration in manufacturing: techniques and applications ".  The 5th International Conference on Computer Integrated Manufacturing,  Singapore International Convention and Exhibition Centre, Singapore, 28-30 March 2000, pp.649-660 (2000) LAU, C.W., NING, A., (CHAN, F.), (IP, R.) and CHUNG, W.W.C.
25"Genetic algorithm approach to cutting scheduling and planning of computerized cutting system in clothing manufacturing".  Proc. of World Congress on Textile in the Millennium,  United Kingdom, 6-7 July, University of Huddersfield, pp.273-283 (1999) WANG, W.K., CHAN, C.K. and  IP, W.H.
26"Improvement of cavitation erosion resistance and corrosion resistance of brass by laser surface modification".  MRS Spring 2000, Symposium J: laser- solid interactions for materials processing,  San Francisco, California, USA, 24-28 April 2000, paper no. J3-2 (2000) TAM, K.F., CHENG, F.T. and  MAN, H.C.
27"Laser surface alloying of brass with NiCrSiB for improving cavitation erosion resistance and corrosion resistance".  45th International SAMPE symposium,  Long Beach, California, 21-25 May, 200, pp.635-644 (2000) TAM, K.F., CHENG, F.T. and  MAN, H.C.
28"Manufacturing information systems research and knowledge management".  1999 GMRG Annual Meeting,  Madrid, Spain, 30 June 1999, pp.1-5 (1999) CHUNG, W.W.C.
29"Manufacturing systems design for a watch manufacturer".  The 5th International Conference on Computer Integrated Manufacturing,  Singapore International Convention and Exhibition Centre, Singapore, 28-30 March 2000, pp.661-672 (2000 ) (CHAN, F.), (MAK, K.L..) and  LAU, C.W.
30"Modeling virtual manufacturing enterprise: a heterarchical multi-agent approach ".  In Yang Huayong and Li Wei, eds.,  Proceedings of the International Conference on Frontiers of Design and Manufacturing 4th Young Scientists Conference on Manufacturing Science 4th S.M. Wu Symposium on Manufacturing Science,  Zhejiang University, 17-19 Jun. 2000, International Academic Publishers, Zhejiang University, pp.133-138 (2000) LEE, W.B. and  (FANG, S.L.)
31"Numerical simulation of non-adiabatic shear banding in metal forming process using finite element method".  In T.X. Yu, Q.P. Sun & J.K. Kim, ed.,  Proceedings of  the 5th Asia-Pacific  Symposium on Advances in Engineering Plasticity and Its Applications (AEPA2000) in Key Engineering Materials,  Vol. 177-180, Hong Kong, 12-16 June 2000, Trans Tech Publications Ltd, Switzerland, pp.553-558 (2000) CHEN, Z.H.*, TANG, C.Y. and  LEE, T.C.
32"Productivity : allied leadership of the top and the operation".  In Gerry Jones, ed.,  World XI  Productivity Congress,  Edinburgh, UK, 3-6 October, The Institute of Management Services, London, pp.CD (1999 ) LEUNG, H.N.* and  LEE, W.B.
33"Radiation calculations in furnace using smoothing monte carlo method".  Fourth International Symposium - Muiltiphase Flow and Heat Transfer,  Xian, China, August 1999, pp.745-753 (1999) LIU, M.S., CHOI, C.K. and  LEUNG, C.W.
34"Superplastic-like deformation of a coarse-grained A15052 alloy".  In T.X. Yu, Q.P. Sun & J.K. Kim, ed.,  Proceedings of the 5th Asia-Pacific Symposium on Advances in Engineering Plasticity and Its Applications (AEPA 2000) in Key Engineering Materials,  Vol. 177-180, Hong Kong, 12-16 June 2000, Trans Tech Publications Ltd, Switzerland, pp.601-606 (2000) CHOW, K.K.* and CHAN, K.C.
35"The enterprise modeling method and tool in dispersed network production system".   In Yang Huayong and Li Wei, eds.,  Proceedings of the International Conference on Frontiers of Design and Manufacturing 4th Young Scientists Conference on Manufacturing Science 4th S.A. Wu Symposium on Manufacturing Science,  Zhejiang University, 17-19 Jun, 2000, International Academic Publishers, Zhejiang University, pp.128-132 (2000) ZHAN, H.F., LEE, W.B., (JIN, Y.H.), (GU, X.J.) and (WU, Z.T.)
36"The melt shear viscosity of polypropylene / glass bead hybrid composites at high extrusion flow rates".  In Thierry Massard and Alain Vautrin, eds.,  The 12th International Conference on Composite Materials,  Paris, France, 5-9 July 1999, France, pp.692-693 (1999) (LIANG, J.Z.), (LI, R.K.Y.), TANG, C.Y. and (CHEUNG, S.W.)
37"The structure and formability of cold-rolled polypropylene sheet".  In T.X. Yu, Q.P. Sun & J.K. Kim, ed.,  Proceedings of the 5th Asia- Pacific Symposium on Advances in Engineering Plasticity and Its Applications (AEPA2000) in Key Engineering Materials,  Hong Kong, 12-16 June 2000, Trans Tech Publications Ltd, Switzerland, pp.357-362 (2000) WU, S.Z.* and  LEE, W.B.
   
Other conference paper  
   
1"A heuristic algorithm for intra-cellular layout".  The 15th conference of the international foundation for production research (ICPR-15 Manufacturing for a global market),  Vol. 2, Limerick, Ireland, 9th-12th August 1999, Department of manufacturing and operation engineering, University of Limerick, Limerick, Ireland, pp.1569-1572 (1999) CHAN, W.M.* and  CHAN, C.Y.
2"Laser cladding of SiC/Si3N4 on Al6061alloy".  18th International Congress on the Application of lasers and electro-optics,  San Diego, USA, 15-19 November, 1999, Laser Institute of America, pp.F216-F224 (1999) MAN, H.C., KWOK, C.T. and  YUE, T.M.
3"Laser welding of Metals/Engineering ceramics".  18th International Congress on the Application of Lasers and Electro-Optics,  San Diego, USA, 15-19 November 1999, Laser Institute of America, pp.D252-D260 (1999) MAN, H.C., TSE, K.K.* and YUE, T.M.
4"Laser wire cladding of aluminium alloy".  18th International Congress on Applications of Lasers and Electro-Optics,  San Diego, CA., USA, 15-19 November 1999, Laser Institute of America, pp.F207-F215 (1999)  CHONG, P.H.*, MAN, H.C. and  (CHAN, S.F.)
   
Reviews, translations, and Other Written Outputs  
   
1"Consultancy project for TQM Consultants Co., Ltd.: Evaluation of entries for the 2000 HK Award for Industry, Quality category for Industry Department".    (May 2000) TSANG, H.C., YUNG, K.C. and TSIM, Y.C.
2"Consultancy project for TQM Consultants Co., Ltd.: Management training program on balanced scorecards for Customs & Excise Department".   ( April 2000) TSANG, H.C.
3"Consultancy project for TQM Consultants Co., Ltd.: Quality management systems consultancy service for UHS".   (April 2000) (CHIN, K.S.), (TONG, A.), TSANG, H.C. and  YUNG, K.C.
4"Consultancy report for Amphenol East Asia Ltd.: Micro-structure examination of cusn5 copper alloy strip and mechanical testing".   (February 2000) YEUNG, C.F.
5"Consultancy report for Crystal Apparel Ltd.: Microstucture examination of x-brass snap button specimens".   (April 2000) YEUNG, C.F.
6"Consultancy report for GEC (HK): Western harbour crossing - investigation of the corrosion of tunnel luminaries".   (August 1999) MAN, H.C.
7"Consultancy report for Group Sense International Limited on her PCB supplier quality system".   (1999) YUNG, K.C.
8"Consultancy report for Jing Liang Electronic: In home training of CAD software".    (May 2000) LAU, K.H.
9"Consultancy report for Kowloon-Canton Railway Corporation: Performance rating & measuring variable work".   (September 1999) FRANKLAND, S.
10"Consultancy report for Mass Transit Railway Corporation: Failure analysis".    (December 1999) LEE, T.C.
11"Consultancy report for Nike International Ltd.: Quality Auditing Techniques Evaluation and Deployment".   (June 2000) YEUNG, W.S.
12"Consultancy report for Outboard Marine Corporation Asia Ltd.: Failure analysis of clutch spring".   (March 2000) YUE, T.M.
13"Consultancy report for Outboard Marine Corporation Asia Ltd.: Failure analysis of steering bracket".   (August 1999) YUE, T.M.
14"Consultancy report for Transpower Technologies (HK) Ltd.: Analysis of phosphorus Bronze specimen".   (June 2000) MAN, H.C.
15"Consultancy report for Transpower Technologies (HK) Ltd.: Tests on zinc coated steel".   (February 2000)  MAN, H.C.
16"Consultancy report for Yip, Tse & Tang Solicitors: Study functionality of OMS MRP2 software".   (May 2000) YUNG, K.L.
   
Translation of other's work  
   
1Creating a reliable organization by Philip Crosby Quality Transformation Series City University of Hong Kong, Hong Kong, pp.1-40 (1999) TSANG, H.C. and  (LEE, L.)
   
Editorships and Higher-level Service External to the Institution< /td>  
   
High-level public or professional service  
   
1A management committee member of the HKSAR Government supported programme titled "Roadmap study for Electronic Packaging Industry in Hong Kong and Pearl River Delta Region (PRDR)" and Co-chairman of its research sub-group.  HKSAR Government (2000) YUNG, K.C.
2Assessor to "2000 Hong Kong Awards for Industry - Technological Achievement".  Hong Kong Technology Centre Corporation (2000) YUE, T.M.
3Committee Member & Symposium Secretary.  The 6th Guangdong- Hong Kong Symposium on Advances In Mechatronic Research and Industrial Development ( 1999) CHAN, CY
4Executive Committee Member of MIE Division of HKIE.  The Hong Kong Institute of Engineers (HKIE) (2000) YUNG, K.C.
5External Advisor to the New Technology Training Scheme (NTTS).  Vocational Training Council (VTC) (2000) YUNG, K.C.
6External Assessor of Applied Research Council Co. Ltd..  HKSAR Government (2000) YUNG, K.C.
7External Assessor to "2000 Hong Kong Awards for Industry: Quality".  HKSAR Government (Industry Department) (2000) YUNG, K.C.
8External Assessor to "2000 Hong Kong Awards for Industry: Technological Achievement".  Hong Kong Industrial Technology Centre Corporation (2000) YUNG, K.C.
9External examiner of Higher Certificate in Supervisory & Quality Management Course offered by Hong Kong Institute of Vocational Education.   Hong Kong Institute of Vocational Education, Tsing Yi (1997-2000) TSANG, H.C.
10First assessor, Professional Assessment Interview - Manufacturing & Industrial Engineering Discipline.  Hong Kong Institution of Engineers (2000) TSANG, H.C. and  (LI, L.M.)
11Honorary Treasurer and Committee Member of Hong Kong Society for Quality.   Hong Kong Society for Quality (1996 to 2000) YUNG, K.C.
12Interview Convenor (Manufacturing Division).  The Institution of Electrical Engineers (UK) (1999-2000) CHIU, W.M.
13Local organizing committee member of the International Symposium on Electronic Materials and Packaging 2000 (EMAP 2000).  International Symposium on Electronic Materials and Packaging 2000 (EMAP 2000) (2000) YUNG, K.C.
14Member of the Metals Training Board.  Vocational Training Council CHAN, L.C.
15Member of Trade Testing Committee of the Plastic Training Board.  Vocational Training Council (2000) CHIU, W.M.
16Member, Executive Committee.  Hong Kong Society of Quality (1999-2000) TSANG, H.C.
17Membership Assessor of Manufacturing and Industrial Engineering Discipline.   The Hong Kong Institute of Engineers (HKIE) (1995 to present) YUNG, K.C.
18Professional Assessment Coordinator (MIE discipline).  The Hong Kong Institution of Engineers (1999-2000) CHIU, W.M.
19Vice-Chairman and Committee Member, Management Professional Group of the SSMD of IEE (HK Centre).  IEE (HK Centre) (1996 to 2000) YUNG, K.C.
20Working Group Member.  The Hong Kong Youth Skill Competition ( Mechatronics Section) (1999) CHAN, CY
   
All Other Outputs  
   
Participation in exhibits  
   
1"Exhibitor : Innovation 2000".  Hong Kong (1999) YUNG, K.C.
2"Exhibitor : The China Hi-Tech Fair".  ShenZhen, China (1999) YUNG, K.C.
   
Patents applied for  
   
1"Electrolytic hardening process".  US Patent & Trademark Office (2000) (US patent no. 6022468) LUK, S.F., LEUNG, T.P., (MIU, W.S.) and  (PASHBY, I.R.)
   
Other outputs  
   
1"A study of quality management paradigm".
Doctor of Business Administration thesis,  Murdoch University, Western Australia, Western Australia (1999)
YEUNG, V.W.S.
2"Modelling and Simulation of Nano-surface Generation in Ultra-precision Machnining".  The Hong Kong Polytechnic University, Hong Kong (2000) (PhD thesis )  CHEUNG, CHI FAI
3"PhD thesis". Managing Maintenance Performance Management In Capital Intensive Organizations,  University of Toronto, Toronto, Canada (2000) TSANG, ALBERT H.C.


[Department of Industrial and Systems Engineering] [Outputs and Publications]