Department of Industrial and Systems Engineering


List of Research Outputs by Academic Staff (2000-2001)

(Authors not Members of the Department are in bracket)
 

 

 

Scholarly Books and Monographs

 

 

 

Research book or monograph (author)

 

 

 

1

Reliability Centred Maintenance: A Key to Maintenance Excellence 1st Ed. City University of Hong Kong, Hong Kong, 61pp (2000) ISBN 962-442-164-1

TSANG, ALBERT H.C., (JARDINE, ANDREW K.S.), (CAMPBELL, JOHN DIXON) and (PICKNELL, JAMES V.)

 

 

Edited book (editor)

 

 

 

1

Guided Industrial Project Handbook (2000-2001). 1st Ed. The Hong Kong Polytechnic University, Hong Kong, 134pp (2001) ISBN 962-367-294-2

CHUNG, W.W.C., LAU, HENRY and LEE, W.B.

2

Manufacturing Information Systems Research: Business Process Renewal.  The Hong Kong Polytechnic University, Hong Kong, 281pp (October 2000) ISBN 962-367-300-0

CHUNG, W.W.C.

3

Proceedings of the 9th International Manufacturing Conference in China.  Vol. 2, The Hong Kong Polytechnic University, Hong Kong, 350pp (2000) ISBN 962-367-292-6

LEE, W.B., CHAN, K.C., TANG, C.Y. and YUEN, E.

4

Proceedings of the 9th International  Manufacturing Conference in China.  Vol. 1, The Hong Kong Polytechnic University, Hong Kong, 461pp (2000) ISBN 962-367-291-8

LEE, W.B., CHAN, K.C., TANG, C.Y. and YUEN, E.

 

 

Journal Articles, Book Chapters, and other Published Papers

 

 

 

Chapter in an edited book (author)

 

 

 

1

"Implementation of a Component-Based Manufacturing Activities Supporting System: An Object Technology Approach".  In Chapter 15, by Walter W.C. Chung, ed.,  Manufacturing Information Systems Research: Business Process Renewal,  The Hong Kong Polytechnic University, Hong Kong, pp.249-265 (October 2000)  ISBN 962-367-300-0

CHUNG, W.W.C., LAU, H.C.W. and LEE, W.B.

2

"Role of IT/IS in Physically Distributed Manufacturing Enterprises".  In Chapter 23 by A. Gunasekaran, ed.,  Agile Manufacturing: 21st Century Manufacturing Strategy,  Elsevier Sciences B.V, Netherland, pp.820 (2001)  ISBN ISBN: 0-08-043567-X

CHUNG, W.W.C. and CHAN, M.S.F.*

3

"Applications of Information Technology in Agile Manufacturing".  In Gunasekaran, A., ed.,  Agile Manufacturing: 21st Century Manufacturing Strategy,  Elsevier, UK, pp.205-228 (January 2001)  ISBN 0-08-043567-X

LAU, H.C.W. and  WONG, E.T.T.

4

"A QFD/Hoshin Approach for Service Quality Deployment : A Case Study".  In James W. Cortada and John A. Woods, eds., The Quality Yearbook 2001,  McGraw-Hill, New York, NY, pp.103-122 (January 2001)  ISBN 0-07-136506-0

(PUN, K.F.), (CHIN, K.S.) and  LAU, H.C.W.

 

 

Article for externally refereed journal

 

 

 

1

"An exact solution for the elastic/plastic bending of anisotropic sheet metal under conditions of plane strain".  International Journal of Mechanical Science,  Vol. 43, pp.1871-1880 (2001)

(CHABRABARTY, J), LEE, W,B, and CHAN, K.C.

2

"An analysis of the plane strain bending of an orthotropic sheet in the elastic/plastic range".  Journal of Materials Processing Technology,  Vol. 104, pp.48-52 (2000)

(CHABRABARTY, J), LEE, W,B, and CHAN, K.C.

3

"The Integration of Manufacturing and Cost Information into Conceptual Design".  The International Journal of Production Research,  Vol. 38, No. 17, pp.4413-4427 (2000)

CHAN, D S K and  (LEWIS, WP)

4

"Outage Planning of Electrical Power System Networks Using Genetic Algorithm".  Journal of Quality in Maintenance Engineering,  Vol. 6, No. 4, pp.241-259 (November 2000)

(CHAN, F.T.S.), LAU, H.C.W. and  (KO, C.C.)

5

"Investment Appraisal Techniques for AMT : A Literature Review".  IMS : International Journal of Manufacturing Technology Management,  Vol. 12, No. 1, pp.35-47 (January 2001)

(CHAN, FELIX), (CHAN, M.H.), LAU, H.C.W. and  (IP, RALPH)

6

"Environment-strategy fit: a study of Hong Kong manufacturing logistics".  Logistics Information Management, Vol. 13, No. 5, pp.286-300 (2000)

CHAN, J.W.K., (BURNS, N.D.) and YUNG, K.L.

7

"Laser bending of a Ti3Al baseed intermetallic alloy".  Materials Letters,  Vol. 49, pp.51-55 (2001)

CHAN, K.C. and  LIANG, J.

8

"One-Stop-Shop Information Mall- MTR's Experience".  Managing Service Quality,  Vol. 10, No. 2, pp.92-97 (2000)

(CHAN, Y.K.), (BROWN, MARTIN), (NEAILEY, K.) and IP, W.H.

9

"Laser surfacing of S31603 stainless steel with engineering ceramics for cavitation erosion resistance".  Surface & Coatings Technology,  Vol. 139, No. 1, pp.14-24 (2001)

CHENG, FT, (KWOK, CT) and  MAN, HC

10

"Characterization of Nano-surface Generation in Single-Point Diamond Turning".  International Journal of Machine Tools and Manufacture,  Vol. 41, No. 6, pp.851-875 (2001)

CHEUNG, C.F. and  LEE, W.B.

11

"Effect of Tool Wear on Force and Quality in Dam-bar Cutting of Integrated Circuit Packages".  Transactions of ASME, Journal of Electronic Packaging,  Vol. 123, No. 1, pp.34-41 (2001)

CHEUNG, C.F., LEE, W.B. and CHIU, W.M.

12

"Study of Factors Affecting the Surface Quality in Ultra-precision Diamond Turning".  Materials and Manufacturing Processes,  Vol. 15, No. 4, pp.481-502 (2000)

CHEUNG, C.F. and LEE, W.B.

13

"Product Design Enhancement by Integration of Virtual Design and Assembly Analysis Tools".  Assembly Automation,  Vol. 20, No. 4, pp.283-290 (2000)

CHOI, A.C.K. and PRASANTHI, G.

14

"The cavitation behaviour of a coarse grained Al5052 alloy under hot unaxial and equibiaxial tension".  Materials Letters,  Vol. 49, pp.189-196 (2001)

CHOW, K.K.* and CHAN, K.C.

15

"Multi-Agent based Virtual Enterprise Supply Chain Network for Order Management".  Industrial Engineering Research (An International Journal of IE Theory and Application),  Vol. 2, No. 2, pp.126-141 (2001)

CHOY, K.L. and  LEE, W.B.

16

"Computerization Strategy for Small Manufacturing Enterprises in Hong Kong".  International Journal of Computer Integrated Manufacturing,  Vol. 14, No. 2, pp.141-153 (2001)

CHUNG, W.C.C. and CHIK, S.K.O.*

17

"Surface Integrity in Electro-discharge machining, ultrasonic machining, and iamond saw cutting of ceramic composites". Ceramics International,  Vol. 26, pp.825-830 (2000)

DENG, JIANXIN and LEE, TAI CHIU

18

"Techniques for improved surface integrity of electrodischarge machined ceeramic composites".  Surface Engineering,  Vol. 16, No. 5, pp.411-414 (2000)

DENG, JIANXIN and LEE, TAI CHIU

19

"Business Process Reengineering in a British Company: A Case Study".  International Journal of Logistic Information Management,  Vol. 13, No. 5, pp.271-285 (2000) (http://www.emerald-library.com)

(GUNASEKARAN, A.), CHUNG, W.W.C. and  (KAN, K.)

20

"Design of Maintenance System in MRPII". Journal of Quality in Maintenance Engineering,  Vol. 6, No. 3, pp.177-191 (2000)

IP, W.H. and  KWONG, C.K.

21

"Multi-Product Planning and Scheduling Using Genetic Algorithm Approach". Computers and Industrial Engineering,  Vol. 38, pp.283-296 (2000)

IP, W.H., (LI, Y), (MAN, K.F.) and  (TANG, K.S.)

22

"A Genetic Algorithm of Determining Cycle Time for Printed Circuit Board Assembly Lines".  European Journal of Operational Research,  Vol. 128, No. 1, pp.175-184 (2001)

JI, P., SZE, M. T.* and  LEE, W. B.

23

"The Algebraic Solution to Forward Kinematics of a 3-DOF Spherical Parallel Manipulator".  Journal of Robotic Systems,  Vol. 18, No. 5, pp.251-257 (2001)

JI, P. and  WU, H. T.

24

"Models involving two inverse Weibull distributions". Reliability Engieering and System Safety,  Vol. 71, No. 1, pp.73-81 (2001)

JIANG, R, (MURTHY, D. N. P.) and JI, P

25

"Limitation on crack speed for a strip-craze model applied to PMMA".  Theoretical and Applied Fracture Mechanics,  Vol. 34, pp.11-16 (2000)

JIE, M and  TANG, C.Y.

26

"Laser surface modification of UNS S31603 Stainless steel Part II: cavitation erosion characteristics".  Materials Science and Engineering A - Structure,  Vol. 290, No. 1-2, pp.74-88 (2000)

KOWK, CT, CHENG, FT and  MAN, HC

27

"Cavitation erosion-corrosion behaviour of laser surface alloyed AISI 1050 mild steel using NiCr SiB".  Materials Science and Engineering A - Structure,  Vol. 303, No. 1-2, pp.250-261 (2001)

KWOK, CT, MAN, HC and  CHENG, FT

28

"Laser surface modification of UNS S31603 stainless steel. Part 1: Microstructures and corrosion characteristics".  Materials Science and Engineering A - Structure,  Vol. 290, No. 1-2, pp.55-73 (2000)

KWOK, CT, CHENG, FT and  MAN, HC

29

"Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3.5% NaCl solution".  Materials Science and Engineering A - Structure,  Vol. 290, No. 1-2, pp.145-154 (2000)

KWOK, CT, CHENG, FT and  MAN, HC

30

"A Real Time Performance Measurement Technique for Dispersed Manufacturing".  Measuring Business Excellence, Vol. 5, No. 1, pp.9-15 (April 2001)

LAU, H.C.W., LAU, PETER, (CHAN, F.T.S.) and  (IP, R.W.L.)

31

"Decision Supporting Functionality in a Virtual Enterprise Network".  Expert Systems with Applications,  Vol. 19, No. 4, pp.261-270 (November 2000)

LAU, H.C.W., (CHIN, K.S.), 
(PUN, K.F.) and 
(NING, ANDREW)

32

"On a Responsive Supply Chain Information System". International Journal of Physical Distribution and Logistics Management,  Vol. 30, No. 7/8, pp.598-610 (October 2000)

LAU, H.C.W. and  LEE, W.B.

33

"Partner Selection and Information Infrastructure of a Virtual Enterprise Network".  International Journal of Computer Integrated Manufacturing,  Vol. 14, No. 2, pp.186-195 (2001)

LAU, H.C.W. and  WONG, E.T.T.

34

"Assimilation of Strategic Information System to Gain Competitiveness : a Neutral Format Approach".  Logistics Information Management,  Vol. 13, No. 5, pp.312-319 (December 2000)

LAU, HCW and  (PUN, KF)

35

"Inheritance and Polymorphism in Real-Time Monitoring and Control Systems".  Journal of Intelligent Manufacturing,  Vol. 11, No. 3, pp.285-294 (2000)

LEE, ALLEN K.C.*, IP, W.H. and YUNG, K.L.

36

"A Dislocation-model of limit strain prediction in aluminium sheet metals under biaxial deformation".  International Journal of Damage Mechanics,  Vol. 9, pp.286-301 (2000)

LEE, W.B. and  WEN, X.Y.*

37

"A Dynamic Surface Topography Model for the Prediction of Nano-surface Generation in Ultra-precision Machining".  International Journal of Mechanical Sciences,  Vol. 43, No. 4, pp.961-991 (2001)

LEE, W.B. and  CHEUNG, C.F.

38

"A Fuzzy Analytic Hierarchy Process Approach in Modular Product Design".  Expert Systems,  Vol. 18, No. 1, pp.32-42 (April 2001)

LEE, W.B., LAU, H.C.W., (LIU, Z.Z.) and  (TAM, SAMSON)

39

"Applications of Virtual Manufacturing in Materials Processing".  Journal of Materials Processing Technology,  Vol. 113, No. 1-3, pp.416-423 (2001)

LEE, W.B., CHEUNG, C.F. and LI, J.G.

40

"Characteristics of Microcutting Force Variation in Ultraprecision Diamond Turning".  Materials and Manufactruring Processes,  Vol. 16, No. 2, pp.177-193 (2001)

LEE, W.B., CHEUNG, C.F. and TO, S.

41

"Prediction of 3-D Surface Topography in Ultra-precision Machining".  China Mechanical Engineering,  Vol. 11, No. 8, pp.845-848 (2000)

LEE, W.B., CHEUNG, C.F. and LI, J.G.

42

"Research on the Development of a Virtual Precision Machining System".  Chinese Journal of Mechanical Engineering,  Vol. 37, No. 6, pp.68-73 (2001)

LEE, W.B., LI, J.G. and CHEUNG, C.F.

43

"Genetic Algorithm to Production Planning and Scheduling Problems for Manufacturing Systems".  Production Planning and Control,  Vol. 11, No. 5, pp.443-458 (2000)

(LI, Y.), (MAN, K.F.), (TANG, K.S,), (KWONG, S.) and  IP, W.H.

44

"Construction of DCES expert system for die casting defects and".  Journal of Foundry,  Vol. 50, No. 4, pp.201-205 (2001)

LU, H.Y.* and  LEE, W.B.

45

"Microstructure and formation mechanism of In-situ synthesized TiC/Ti surface MMC on Ti-6Al-4V by laser cladding".  Scripta Materialia,  Vol. 44, No. 12, pp.2801-2807 (2001)

MAN, H.C., ZHANG, S, CHENG, F.T. and  YUE, T.M.

46

"Cavitation erosion and corrosion behaviour of laser surface alloyed MMC of SiC and Si3N4 on Al alloy AA6061".  Surface & Coatings  Technology,  Vol. 132, No. 1, pp.11-20 (2000)

MAN, HC, KOWK, CT and YUE, TM

47

"Intelligenct hybrid system for initial process parameter setting of injection moulding".  International Journal of Production Research,  Vol. 38, No. 17, pp.4565-4576 (2000)

MOK, S.L.*, KWONG, C.K. and (LAU, W.S.)

48

"A Comparative study on migratory properties of copper in nickel, cobalt and palladium deposits".  Electroplating & Finishing (Chinese),  Vol. 19, No. 4, pp.4-7 (2000)

NG, W.Y., MAN, H.C., YEUNG, C.H., SIU, C.L. and LEE, C.Y.

49

"Study of properties of cobalt - tungsten binary alloy deposit as copper barrier".  Electroplating & Finishing (Chinese),  Vol. 19, No. 6, pp.1-7 (2000)

NG, W.Y., MAN, H.C., YEUNG, C.H., SIU, C.L. and LEE, C.Y.

50

"A QFD/Hoshin Approach for Service Quality Deployment : A Case Study".  Managing Service Quality,  Vol. 10, No. 3, pp.156-169 (October 2000)

(PUN, K.F.), (CHIN, K.S.) and LAU, H.C.W.

51

"Chinese Cultural Influences on EI/TQM and Organizational Change".  International Journal of Management Review,  Vol. 2, No. 4, pp.325-338 (December 2000)

(PUN, K.F.), (CHIN, K.S.) and LAU, H.C.W.

52

"A Parametric Analysis of Cutting Forces in Single-Point Diamond Turning of Al6061/SiCp Metal Matrix Composites (MMCs)".  Materials and Manufacturing Processes,  Vol. 16, No. 1, pp.61-78 (2001)

RAMESH, M.V., LEE, W.B., CHEUNG, C.F. and  CHAN, K.C.

53

"Determining Young's modulus of conductive thin films by a thermal bend beam test".  Journal of Strain Analysis for Engineering Design,  Vol. 36, No. 2, pp.163-168 (2001)

(SHEN, W.), TANG, C.Y., (LI, W.) and  (PENG, L.H.)

54

"Reconstruction of solids with hidden details from orthographic projections using 2-stage extrusion".  Computer-aided Design,  Vol. 33, No. 1, pp.91-102 (2001)

SHUM, S. P.*, (LAU, W. S.), (YUEN, M.M.F.) and YU, K.M.

55

"Model Building for the Component Assignment Problem in Printed Circuit Board Assembly".  Assembly Automation,  Vol. 21, No. 1, pp.55-60 (2001)

SZE, M. T.*, JI, P. and  LEE, W. B.

56

"A hybrid artificial intelligence system for optical lens design".  International Journal of Computer Applications in Technology,  Vol. 13, No. 3/4/5, pp.229-236 (2000)

TAM, S.M., KWONG, C.K. and IP, W.H.

57

"An Object-Based Process Planning and Scheduling Model in a Product Design Environment".  International Journal of Logistic Information Management,  Vol. 13, No. 4, pp.191-200 (2000)

(TAM, W.H.S.), LEE, W.B., CHUNG, W.W.C. and LAU, H.C.W.

58

"Experimental Study on Stable Growth of Crack and Craze Damage in HIPS under Tension at Room Temperature".  Polymer Testing,  Vol. 20, pp.241-251 (2001)

TANG, C.Y., (PENG, L.H.), (LI, C.C.), SHEN, W. and TSUI, C.P.*

59

"Modelling of Non-Linear Stress-Strain Behaviour of HIPS with Craze Damage in Tensile Loading-Unloanding Process". Polymer Testing,  Vol. 20, pp.15-18 (2001)

TANG, C.Y., TSUI, C.P.*, SHEN, W., (LI, C.C.) and (PENG, L.H.)

60

"Deformation behaviour of aluminium single crystals in ultraprecision diamond turning".  Journal of Materials Processing Technology,  Vol. 133, pp.296-300 (2001)

TO, S. and  LEE, W.B.

61

"Influence of Material Swelling Upon Surface Roughness in Diamond Turning of Single Crystals".  Materials Science and Technology,  Vol. 17, No. 1, pp.102-108 (2001)

TO, S., CHEUNG, C.F. and LEE, W.B.

62

"Process design of microchip encapsulation: a case based reasoning with fuzzy retrieval approach".  Journal of Electronics Manufacturing,  Vol. 10, No. 2, pp.127-138 (2001)

TONG, K.W.* and  KWONG, C.K.

63

"Initial process-parameters setting of transfer moulding in microchip encapsulation: a case-based reasoning approach". Journal of Materials Processing Technology,  Vol. 113, No. 1-3, pp.432-438 (2001)

TONG, KW*, KWONG, CK and  CHAN, CY

64

"Co-ordination and monitoring in an intelligent global manufacturing service system".  Computers in Industry, Vol. 43, pp.83-95 (August 2000)

(TSO, S.K.), LAU, H.C.W. and (HO, JOHN)

65

An Approach to the Distributed Parametric Path Planning Journal of System Simulation Vol. 12, No. 1, pp.6-8 (2000)

TU, LIZHONG, JI, P., (ZUO, D.) and  (WANG, M.)

66

"A Heuristic Genetic Algorithm for Subcontractor Selection in a Global Manufacturing Environment".  IEEE Transactions on Systems, Man, and Cybernetics - Part C,  Vol. 31, No. 2, pp.189-198 (2001)

(WANG, D.), YUNG, K.L. and 
IP, W.H.

67

"A Human-Computer Interactive Approach Based on Activity-Section Analysis for BPR".  Production Planning and Control,  Vol. 11, No. 8, pp.789-796 (2000)

(WANG, D.), (TANG, Z.), IP, W.H. and  (FUNG, Y.K.)

68

"Textures of sheet in AA3003 aluminium alloy under biaxial stretching".  Textures and Microstructures,  Vol. 34, pp.217-225 (2000)

WEN, X.Y.* and  LEE, W.B.

69

"Modelling the effect of  complex waveform on surface finishing in pulse current electroforming of nickel".  Surface & Coatings Technology,  Vol. 135, pp.91-97 (2000)

WOMG, K.P.*, CHAN, K.C. and  YUE, T.M.

70

"A study of hardness and grain size in pulse current electroforming of nickel using different shaped waveforms".  Journal Applied Electrochemistry,  Vol. 31, pp.25-34 (2001)

WONG, K.P.*, CHAN, K.C. and  YUE, T.M.

71

"Influence of spike current in different shaped waveforms on the surface finish of nickel electroforms".  Surface & coatings technology,  Vol. 140, pp.284-292 (2001)

WONG, K.P.*, CHAN, K.C. and YUE, T.M.

72

"Evaluation of optimum combinations of spreading and cutting machines in a garment factory".  International Journal of Advanced Manufacturing Technology,  Vol. 18, No. 1, pp.62-66 (2001)

WONG, W.K., CHAN, C.K. and IP, W.H.

73

"A hybrid flowshop model for apparel manufacture".  International Journal of Clothing Science and Technology,  Vol. 13, No. 2, pp.115-131 (2001)

WONG, W.K., CHAN, C.K. and IP, W.H.

74

"Recycling of the Rodrun LC-5000 LCP/polycarbonate in situ composities".  Polymer,  Vol. 41, No. 20, pp.7391-7397 (2000)

XU, QW* and  MAN, HC

75

"A New Method to Measure Non-symmetric 3-D Temperature Distribution of a Coal Flame".  Instrumentation Science & Technology,  Vol. 28, No. 5, pp.349-361 (2000)

XU, Y, YUNG, K L, (WU, Z) and (LI, T)

76

"Computer simulation on reconstruction of 3-D flame temperature distribution".  Computational Mechanics,  Vol. 26, pp.478-482 (2000)

XU, Y, YUNG, K L, (WU, Z) and (LI, T)

77

"A 2D Tolerance Chart for Machining Angular Features".  International Journal of Advanced Manufacturing Technology,  Vol. 17, No. 7, pp.523-530 (2001)

XUE, J. B.* and  JI, P.

78

"Laser cladding of SiC - reinforced MMC coating".  Chinese Journal of Lasers B,  Vol. B10 Supplement, pp.V29-V33 (2001)

(YANG, YQ), (LIU, CL), MAN, HC, (ZHU, M) and (CHE, XZ)

79

"Microstrucutre evolution of laser clad layers of W-C0Co alloy powders".  Surface & Coatings and Technology, Vol. 132, No. 2-3, pp.130-136 (2000)

(YANG, YQ) and  MAN, HC

80

"The effect of excimer laser surface treatment on pitting corrosion resistance of 316LS stainless steel".  Surface & Coatings and Technology,  Vol. 137, No. 1, pp.65-71 (2001)

YUE, T.M., YU, J.K. and MAN, H.C.

81

"Excimer laser surface treatment of Ti-6Al-4V alloy and the resulting corrosion properties".  Laser Engineering,  Vol. 10, No. 2, pp.133-145 (2000)

YUE, TM, WU, YX and  MAN, HC

82

"Laser cladding of stainless steel on Magnesium ZK60/SiC composite".  Materials Letters,  Vol. 47, No. 3, pp.165-170 (2001)

YUE, TM, HU, QW, MEI, Z and MAN, HC

83

"Dynamic Analysis of Melting in Injection Extruder". International Polymer Processing Vol. 15, No. 3, pp.255-259 (2000)

YUNG, K L, XU, Y and LAU, FRANCIS

84

"XPS investigation of Upilex-S Polyimide ablated by 355 nm Nd:YAG Laser".  Applied Surface Science,  Vol. 173, No. 3-4, pp.193-202 (2001)

YUNG, K.C., ZENG, D.W. and YUE, T.M.

85

"A Transient Melting Model of Polymer Balls Sliding Against the Barrel".  International Polymer Processing,  Vol. 16, No. 2, pp.108-112 (2001)

YUNG, K.L., XU, Y. and LAU, K.H.

86

"Corrosion rsistance enhancement of Ni-resist ductile iron by laser surface alloying".  Scripta Materialia,  Vol. 44, pp.651-657 (2001)

ZENG, DW, (XIE, C), (HU, Q) and YUNG, KC

87

"Investigation of corrosion behavior of high nickel ductile iron by laser surface alloying with copper".  Scripta Materialia,  Vol. 44, pp.2747-2752 (2001)

ZENG, DW, YUNG, KC and (XIE, C)

88

"In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4V".  Surface & Coatings  Technology,  Vol. 138, No. 1, pp.95-100 (2001)

(ZHANG, S), (WU, WT), (WANG, MC) and  MAN, HC

89

"EBSD of Zn-rich phases in Zn-Al-based alloys".  Materials Characterization,  Vol. 46, No. 1, pp.19-23 (2001)

ZHU, Y.H., LEE, W.B., YEUNG, C.F. and  YUE, T.M.

90

"Tensile deformation and phase transformation of furnace-cooled Zn-Al based alloy".  Materials Science and Engineering,  Vol. A295, pp.95-101 (2000)

ZHU, Y.H. and  LEE, W.B.

 

 

Article for policy or professional journal

 

 

 

1

"Approach to Costing Template Improves Use of Resources". Advanced Manufacturing Technology Alert, Vol. Article 2, No. 41200, pp.2 (September 29, 2000)

CHUNG, W.W.C.

 

 

Conference and Working Papers

 

 

 

Invited conference paper

 

 

 

1

"A tripartite partnership to elevate technology advancement of Hong Kong PCB and substrate industries". In CityU, Hong Kong, ed., The 4th International Academic Conference on Electronic Packaging Research, Education and Training for the New Millennium, CityU, 5 March 2001, pp.6-7 (2001)

YUNG, KC

 

 

Refereed paper at a conference

 

 

 

1

"Excimer laser surface modification of aluminium alloy 7075 for corrosion resistance improvement".  7th European Conference on Advanced Materials and Process (EURO MAT 2001),  Rimini, Italy, 10 June, 2001 to 14 June, 2001, pp.on CD Rom (2001)

CHAN, C.P.*, YUE, T.M. and  MAN, H.C.

2

"Information integration platform for CIMS".  The first IEEE International Conference on Management of Innovation and Technology ICMIT 2000,  Singapore, 12-15 November, pp.743-747 (2000) (Paper number JB06,  Proceedings C5.3)

(CHAN, F.T.S.), (ZHANG, J.), LAU, H.C.W. and  (NING, A.)

3

"Object-oriented architecture of control systems for agile manufacturing cells".  The first IEEE International Conference on Management of Innovation and Technology ICMIT 2000,  Singapore, 12-15 November, pp.863-868 (2000) (Paper number JB07, Proceedings D3.6)

(CHAN, F.T.S.), (ZHANG, J.), LAU, H.C.W. and  (NING, A.)

4

"A Simulation Approach in Supply Chain Management". The 4th International Conference on Managing Innovative Manufacturing,  Aston University, Birmingham, UK, 17-19 July 2000, pp.143-151 (2000)

(CHAN, FELIX), (TANG, NELSON), LAU, H.C.W. and 
(IP, RALPH)

5

"Analysis of Dynamic Dispatching Rules for a Flexible Manufacturing System".  IMCC'2000 International Manufacturing Conference in China,  Vol. 2, Hong Kong, China, 16-17 August 2000, pp.261-262 (2000)

(CHAN, FELIX), (CHAN, H.K.), LAU, H.C.W. and  (IP, RALPH)

6

"Comparative Evaluations of Maintenance Policies in a Manufacturing Sytem".  The 8th International Conference on Manufacturing Engineering, ICME, 2000,  Sydney, Australia, 27-30 August 2000, pp.490-496 (2000)

(CHAN, FELIX), (LUONG, L.H.S.), (IP, RALPH) and 
LAU, H.C.W.

7

"Developing an e-link Configuration System for a Toy Company (Extended Abstract)".  In Lee, W.B., Chan, K.C., and Tang, C.Y., eds.,  Proceedings of the 9th International Manufacturing Conference in China,  Vol. II, Hong Kong, 16-17 August 2001, The Hong Kong Polytechnic University, Hong Kong, pp.165-166 (2000)

CHAN, J.W.K. and FONG, E.N.S.*

8

"Supply Chain Analysis for a SME in Hong Kong (Extended Abstract)".  In Lee, W.B., Chan, K.C., and Tang, C.Y., eds., Proceedings of the 9th International Manufacturing Conference in China,  Vol. II, Hong Kong, 16-17 August 2000, The Hong Kong Polytechnic University, Hong Kong, pp.207-208 (2000)

CHAN, J.W.K. and  FOK, K.W.K.*

9

"Deformation Mode Analysis of Forming Limit Diagrams for Tailor-welded blanks".  SAE 2001 World Congress,  Vol. 2001-01-0092, Detroit, Michigan, USA., March 5-8, 2001, SAE Technical Paper Series ( ISSN 0148-7191 ), 400, Commonwealth Drive, Warrendale, PA 15096-0001, USA., pp.1-8 (2001) (Fatigue & Failure of  Spot Welds and weld Joints ( SP-1621))

CHAN, S.M.*, CHAN, L.C. and  LEE, T.C.

10

"Thickness Ratio Effects on Forming Limit Diagram of Tailor-welded Blanks.".  The 4 th International ESAFORM Conference on Material Forming,  Vol. One, Liege, Belgium, 23-25 April, 2001, Department MSM, University of  Leige, Belgium., Leige, Beligum, pp.329-332 (2001)

CHAN, S.M.*, CHAN, L.C. and  LEE, T.C.

12

"The application of dynamic business process reengineeirng in PCB manufacturing".  Proceedings of the Ninth International Manufacturing Conference in China,  Hong Kong, August, The Hong Kong Polytechnic University, Hong Kong, pp.117-118 (2000)

CHAN, TH*, YUNG, KC and  (MOK, AKS)

13

"An Investigation on the Formation and Propagation of Shear Band in Fine Blanking Process".  In Lee, W.B., Chan, K.C., Tang, C.Y., and Yuen, E., eds.,  The 9th International Manufacturing Conference in China,  Vol. 1, Hong Kong, 16-17 August 2000, pp.69-70 (2000)

CHEN, Z.H.*, CHAN, L.C., LEE, T.C. and  TANG, C.Y.

14

"Dynamic Modelling of Magnetic Materials for High Frequency Applications".  In Lee, W.B., Chan, K.C., Tang, C.Y., and Yuen, E., eds.,  The 9th International Manufacturing Conference in China,  Vol. 1, Hong Kong, 16-17 August 2000, pp.119-120 (2000)

CHENG, K.W.E., LEE, W.S. and  TANG, C.Y.

15

"Magnetic Permeability of Ferrites and Molydbenum Permalloy Powder under High Frequency Operation and Extreme Physical Environment".  In Lee, W.B., Chan, K.C., Tang, C.Y., and Yuen, E., eds.,  The 9th International Manufacturing Conference in China,  Vol. 1, Hong Kong, 16-17 August 2000, pp.229-230 (2000)

CHENG, K.W.E., CHAN, H.L. and  TANG, C.Y.

16

"Prediction of Nano-surface Generation in Ultra-precision Diamond Turning from a New Materials Induced Vibration Model".  In Balsamo, A., Mana, G., Evans, C.J., Mortarino, M., Frank, A., Sartori, S., Knapp, W. and Thwaite, E.G., eds.,  Proceedings of the 2nd International Conference of the European Society for Precision Engineering and Nanotechnology,  Vol. 2, Turin, Italy, 27-31 May, 2001, euspen, headquarters, UK, pp.750-751 (2001)

CHEUNG, C.F. and  LEE, W.B.

17

"A Checklist Approach for Designing an Environmental Friendly Product".   9th International Manufacturing Conference in China,  Hong Kong, August 2000, pp.1-3 (2000)

CHOI, A.C.K. and  LAI, W.H.

18

"Waste Impact Assessment of Manufacturing Processes for Product Design Evaluations".  7th International Conference on Production Engineering, Design and Control,  Alexandria, Egypt, February 2001, pp.571-582 (2001)

CHOI, A.C.K. and  (KAEBERNICK, H.)

19

"Hot deformation behaviour of coarse grained Al7075 alloy".  In J. Kazadi, J. Masounave, ed.,  Light Metals 2000,  Ottawa, Canada, 20 -23 August 2000, Canada, pp.521-527 (2000)

CHOW, K.K.* and  CHAN, K.C.

20

"Multi-agent based Virtual Enterprise Architecture for Supply Chain Management ( Extended Abstract}".  In Lee, W.B., Chan, K.C., Tang, C.Y., eds.,  Proceedings of the 9th International Manufacturing Conference in China ,  Hong Kong, 16-17 August, The Hong Kong Polytechnic University, pp.181-182 (2000)

CHOY, K.L. and  LEE, W.B.

22

"Direct toolpath generation from massive point input".  In Lee, W. B.; et al., ed.,  International Manufacturing Conference in China,  Vol. 2, Hong Kong, 16-17, August 2000, Hong Kong Polytechnic University, Hong Kong, pp.53-54 (2000)

CHUI, K L*, LEE, T C and YU, K M

23

"A ductile damage model for deep drawing process".  In K. Mori, ed.,  The 7th International Conference on Numerical Methods in Industrial Forming Processes,  Japan, 18-21 June 2001, pp.769-774 (2001)

FAN, J.P., TANG, C.Y. and LEE, T.C.

24

"Speeding of mechanical parts in design and manufacturing process through an automatic information interpreting tool". 34th CIRP International Seminar on Manufacturing Systems,  Greece, May 2001, pp.285-289 (2001)

(HOU, KELVIN C.C.), (IP, RALPH W.L.), (LAW, P.Y.), (CHAN, FELIX T.S.) and LAU, H.C.W.

25

"An Economical Sculptured Surface Machining Approach Using Fuzzy Models and Ball-Nosed Cutters".  IMCC'2000 International Manufacturing Conference in China,  Vol. 2, Hong Kong, China, 16-17 August 2000, pp.251-252 (2000)

(IP, RALPH), LAU, H.C.W. and (CHAN, FELIX)

26

"A Cross-Platform Information Exchange System for Manufacturing".  8th International Conference on Manufacturing Engineering,  Sydney, Australia, 27-30 August 2000, pp.251-255 (2000)

LAU, H.C.W., (NING, A.) and (CHAN, FELIX)

27

"An Innovative Scheme for Product and Process Design".  IMCC'2000 International Manufacturing Conference in China,  Vol. 2, Hong Kong, China, 16-17 August 2000, pp.27-28 (2000)

LAU, H.C.W., (NING, A.), (IP, RALPH) and  (CHAN, FELIX)

28

"Design & Development of a Flexible Workflow Supply Chain System".  The first IEEE International Conference on Management of Innovation and Technology ICMIT 2000,  Singapore, 12-15 November, pp.792-797 (2000) (Paper number JB14, Proceedings D1.7)

LAU, H.C.W., (NING, A.), (CHAN, F.T.S.) and  (IP, R.W.L.)

29

"Microscopic Observation and Curve Surface Moire Measurement of Shear Damage in Aluminium Alloy 2024T3".  In Lee, W.B., Chan, K.C., Tang, C.Y., and Yuen, E., eds.,  The 9th International Manufacturing Conference in China,  Vol. 1, Hong Kong, 16-17 August 2000, pp.243-244 (2000)

LEE, T.C., TANG, C.Y. and RAO, B.

30

"Product data allocation in an object-based distributed product data management system".  In Lee, W B; et al., ed.,  International Manufacturing Conference in China,  Vol. 2, Hong Kong, 16-17 August 2000, Hong Kong Polytechnic University, Hong Kong, pp.187-188 (2000)

LEONG, K K*, YU, K M and LEE, W B

31

"Laser-assisted plating of printed circuit board microvia".  In Surface Mount Technology Association, ed.,  Proceedings of The 6th Annual New & Emerging Technologies for Electronics Packaging and Assembly,  Texas, USA, October 31, Surface Mount Technology Association, USA, pp.64-69 (2000)

LEUNG, ESW*, YUNG, KC and LEE, WB

32

"Metallurgical Study on Cutting Edge Finish under Various Blanking Speeds in Fine-Blanking Process".  In Lee, W.B., Chan, K.C., Tang, C.Y., and Yuen, E., eds.,  The 9th International Manufacturing Conference in China,  Vol. 1, Hong Kong, 16-17 August 2000, pp.237-238 (2000)

LEUNG, Y.C., CHAN, L.C., LEE, T.C. and TANG, C.Y.

33

"Rapid prototyping for self-similarity design".  In Lee, W B; et al., ed.,  International Manufacturing Conference in China,  Vol. 2, Hong Kong, 16-17 August 2000, Hong Kong Polytechnic University, Hong Kong, pp.93-94 (2000)

SOO, S C* and  YU, K M

34

"A Study of the Melt Flow Behaviour of ABS/CaCO3 Composites in Capillary Extrusion".  In Lee, W.B., Chan, K.C., Tang, C.Y., and Yuen, E., eds.,  The 9th International Manufacturing Conference in China,  Vol. 1, Hong Kong, 16-17 August 2000, pp.45-46 (2000)

TANG, C.Y. and  (LIANG, J.Z.)

35

"Finite Element Simulation of Necking Using a Damage Model".  In Lee, W.B., Chan, K.C., Tang C.Y., and Yuen, E., eds.,  The 9th International Manufacturing Conference in China,  Vol. 1, Hong Kong, 16-17 August 2000, pp.177-178 (2000)

TANG, C.Y., FAN, J.P. and LEE, T.C.

36

"Intelligent Production system Modeling".  In Dr. K.L. Yung, ed.,  Proceedings of the 6th Guangdong-Hong Kong Symposium on Advances in Mechatronic Research and Industrial Development,  Quanzhou, China, November 2000, Wuhan University of Technology, Wuhan, China, pp.210-220 (2000)

TANG, CS* and  CHAN, CY

37

"Investigation of Surface Properties in Ultra-precision Diamond Turning".  In Balsamo, A., Mana, G., Evans, C.J., Frank A., Sartori, S., Knapp, W. and Thwaite, E.G., eds.,  Proceedings of the 2nd International Conference of the European Society for Precision Engineering and Nanotechnology,  Vol. 2, Turin, Italy, 27-31 May, 2001, euspen headquarters, UK, pp.746-749 (2001)

TO, S., LEE, W.B. and CHEUNG, C.F.

38

"An Adaptation to ISO  9001:2000 for Certified Organisations.".  Proceedings of the 6th International Conference on ISO 9000 and TQM.,  UK, 17-19 April 2001, pp.93-100 (2001)

TSIM, Y.C., YEUNG, W.S. and  (LEUNG, T.C.)

39

"Architecture of capacity planning model for apparel manufacture considering machine breakdown".  Proceedings of International Manufacturing Conference in china,  Vol. II, Hong Kong, 14 Aug 2000, pp.149-150 (2000)

WONG, W.K., CHAN, C.K. and  IP, W.H.

40

"Theoretical Study of Orientation and Mechanical Properties of Rolled Polypropylene Sheets".  2000 International Chemical Congress,  Honolulu, Hawaii, 14-19 December 2000, pp.96-102 (2000)

WU, S.Z.* and  LEE, W.B.

41

"Rapid manufacture of jewelry by voxel approximation".  In Lee, W B; et al., ed.,  International Manufacturing Conference in China,  Vol. 2, Hong Kong, 16-17 August 2000, Hong Kong Polytechnic University, Hong Kong, pp.87-88 (2000)

YOUNG, Y Y, YU, K M and WONG, C K

42

"Slab model approximation for rapid jewel ring manufacture".  In Campbell, R I, ed.,  9th European Conference on Rapid Prototyping and Manufacturing,  Athens, Greece, 17-19 July 2000, University of Nottingham, pp.97-112 (2000)

YOUNG, Y Y, YU, K M and WONG, C K

43

"Modelling multi-material assembly for rapid manufacture".  In Campbell, R I, ed.,  9th European Conference on Rapid Prototyping and Manufacturing,  Athens, Greece, 17-19 July 2000, University of Nottingham, pp.299-309 (2000)

ZHU, W M* and  YU, K M

44

"Tool path generation of multi-material assembly for rapid manufacture".  In Lee, W B; et al., ed.,  International Manufacturing Conference in China,  Vol. 2, Hong Kong, 16-17 August 2000, Hong Kong Polytechnic University, Hong Kong, pp.121-122 (2000)

ZHU, W M* and  YU, K M

 

 

Other conference paper

 

 

 

1

"Laser surface cladding of Mo-WC on AA 6061 aluminium alloy".  Proceedings of the 19th International Congress on Applications of Lasers and Electro-optics,  Vol. 89, Dearborn, MI,USA, 2-5 October 2000, Laser Institute of America, pp.D105-D113 (2000)

CHONG, PH*, MAN, HC and  YUE, TM

2

"Simulation of high pressure gas flow field inside a laser cut kerf".  Proceedings of the 19th International Congress on Applications of Lasers and Electro-optics,  Vol. 89, Dearborn, MI,USA, 2-5 October 2000, Laser Institute of America, pp.B87-B96 (2000)

DUAN, J*, MAN, HC and YUE, TM

3

"Laser surface alloying of AISI1050 Mild Steel for cavitation Erosion Resistance using NiCrSiB".  Proceedings of the 19th International Congress onapplications of Lasers and Electro-optics, Vol. 89, Dearborn, MI, USA, 2-5 October 2000, Laser Institute of America, pp.D141-150 (2000)

MAN, HC, KWOK, CT, CHENG, FT and  (DING, J)

4

Simulation of Object-Oriented Methodology on Manufacturing Execution System. Proceedings of The 6th Guangdong-Hong Kong Symposium on Advances in Mechatronic Research and Industrial Development, Guangzhou, 25th November, 2000, Wuhan University of Technology Press, Wuhan, China, pp.237-247 (2000)

WANG, Q*, YUNG, K L and IP, W H

5

"Simulation of Transient Process in Melting Section of Reciprocation Extruder".  Proceedings of The 6th Guangdong-Hong Kong Symposium on Advances in Mechatronics Research and Industrial Development,  Guangzhou, China, 25th November, 2000, Wuhan University of Technology Press, Wuhan, China, pp.248-254 (2000)

YUNG, K L, XU, YAN and LAU, FRANCIS

6

"Laser cladding of Co-based alloy on 2Cr13 stainless steel".  Proceeedings of the 19th International Congress on Applications  of Lassers and Electro-optics,  Vol. 89, Dearborn, MI, USA, 2-5 October 2000, Laser Institute of America, pp.D201-D209 (2000)

(ZHANG, S), MAN, HC, (WU, WT) and  (WANG, MC)

 

 

Works of fiction, consulting reports, case studies, & etc.

 

 

 

Consulting or contract research report

 

 

 

1

"Due diligence for the technology and business model of DynaVision Technologies Limited (Production Process)". (25 July 2000 & 31 July 2000.)

CHAN, CY

2

"A Report on Titanium Joining Method". Vol. Cybvision+, No. May 2001 Issue, C228 ( Hong Kong ) Ltd., Hong Kong, 6pp (2001) (http://www.c228.com)

CHAN, L.C. and MAN, H.C.

3

"Case Study Report of Ecodesign and Life Cycle Assessment for Wing Sang Bakelite Electrical Mfg. Ltd.". (2001)

CHOI, A.C.K. and LAI, W.H.

4

"Case Study Report of Ecodesign and Life Cycle Assessment for G.E.W. Corporation Limited". (2001)

CHOI, A.C.K.

5

"Performance Rating". (2000) (To provide a performance rating clinic to check the accuracy of industrial engineering staff and advise on appropriate improvements.)

FRANKLAND, STEPHEN

6

"Work Measurement in the Sorting Office of Hongkong Post". (2000) (To provide advice and appropriate training of measuring the work content in the sorting office of Hongkong Post and to assist in setting up a standard time data base.)

FRANKLAND, STEPHEN

7

"Consultancy Report for Pro-tooling (HK) Ltd: Evaluation and Comments on the Design of a set of Plastic Toy Tooling". (April, 2001)

LAU, K.H.

8

"Consultancy Report for Unigraphics Solution (HK) Ltd: Training and Teaching of UF Software". (Jan., 2001)

LAU, K.H.

9

"Consultancy Report for Wing Sang Bakelite Electrical Mfg. Ltd/G.E.W: Formulation of a Collaborative Design Team Using CAD/CAE/CAM/PDM". (Oct., 2000)

LAU, K.H.

10

"Analysis of the grain structure and properties of brass". (2000) (Transpower Technologies Ltd)

MAN, HC

11

"Analysis of wire bonding head". (2001) (Transpower Technologies Ltd)

MAN, HC

12

"Evaluation of mechanical properties for two copper alloys". (2000) (Kam Ho Industrial Co.)

MAN, HC

13

""Evaluation of entries for the 2001 HK Award for Industry, Quality category" for Trade & Industry Department, the HKSAR Government". (2001)

TSANG, ALBERT H.C., YUNG, WINCO, (CHIN, K.S.) and (TONG, AARON)

14

"Professional opinions on the itegrity of a factory's quality system". (2001)

TSANG, ALBERT H.C.

15

"Professional Training on Design of Experiments". (June 2001)

TSIM, YICK-CHI

16

"Enhancement of the quality management program for planning, control & improvement". (2001) (Consultancy)

YEUNG, WING SHUN VINCENT and TSIM, YICK CHI

 

 

Editorships and Higher-level Service External to the Institution

 

 

 

High-level public or professional service

 

 

 

1

Organizing Committee. The 2001 ROBOT OLYMPIAD for primary and secondary school (2001)

CHAN, CY

2

Working Group Member. The Hong Kong Youth Skill Competition - Mechatronics Section (2000-2001)

CHAN, CY

3

Honary Secretary. Specialized Section in Manufacturing and Systems Engg., Institution of Electrical Engineers, Hong Kong (2000-2001)

CHAN, K.C.

4

Interview Convenor (Manufacturing Division). The Institution of Electrical Engineers (UK) (2000-2001)

CHIU, WAI MING

5

Professional Assessment Coordinator (MIE Discipline). The Hong Kong Institution of Engineers (2000-2001)

CHIU, WAI MING

6

Co-Chairman of Academic Committee. The 3rd International Conference on Computer Aided Industrial Design and Conceptual Design, the Computer Aided Design Technology Showcase (2000)

CHOI, A.C.K.

7

Committee Member Division of Manufacturing and Industrial Engineering. The Hong Kong Institution of Engineers (2000-2001)

CHOI, A.C.K.

8

External Assessor of the New Technology Training Scheme. Vocational Training Council (2000)

CHOI, A.C.K.

9

Committee member, Plastic Industry Training Board. Vocational Training Council (2000-2002)

MAN, HC

10

External Examiner. The Open University of Hong Kong (2000-2001)

MAN, HC

11

Chairman of Publication Committee (English). Institute of Industrial Engineers (Hong Kong) (2000-2001) (Editor of the IIE Newsletter)

TANG, C.Y.

12

External Examiner of the Higher Certificate in Supervisory & Quality Management Course offered by Hong Kong Institute of Vocational Education. Hong Kong Institute of Vocational Education, Tsing Yi (2000-2001)

TSANG, ALBERT H.C.

13

Member of Executive Committee. Hong Kong Society for Quality (HKSQ) (2000-2001)

TSANG, ALBERT H.C.

14

Member, Advisory Board for Vocational Education. Vocational Training Council (2000-2002)

TSANG, ALBERT H.C.

15

Reassessment of the HKIE Graduate Training Scheme A - Manufacturing & Industrial Engineering, offered by HKPC. Hong Kong Institution of Engineers (2001)

TSANG, ALBERT H.C.

16

Committee member . The Hong Kong Assoication of Certification Laboratory Ltd (2000-2001)

TSIM, Y.C.

17

Committee Member of The Materials Division. The Hong Kong Institution of Engineers (2000/2001)

YUE, T.M.

18

Member of Continuing Professional Development Committee. The Hong Kong Institution of Engineers (2000/2001)

YUE, T.M.

19

Chairman of the Validation Panel for the Manufacturing and Industrial Engineering Course Board. Hong Kong Institute of Vocational Education (2001)

YUNG, KL

20

Executive Committee Member. Hong Kong Institute of Engineers (HKIE) (2001)

YUNG, KC

21

External Assessor. Applied Research Council (2001)

YUNG, KC

22

External Assessor on "2001 Hong Kong Awards for Industry: Quality. Trade and Industry Department, HKSAR (2001)

YUNG, KC

23

Founding Director. Hong Kong Electronics Packaging and Manufacturing Services Association (HKEPMSA) (2000)

YUNG, KC

24

Honarary Member. The Hong Kong Printed Circuit Association (HKPCA) (2001)

YUNG, KC

25

Membership Assessor. The Hong Kong Institute of Engineers (2001)

YUNG, KC

 

 

All Other Outputs

 

 

 

Speech or other prestigious public presentation

 

 

 

1

"Seminar on Ecodesign and Life Cycle Assessment". Hong Kong Institution of Engineers, Hong Kong (2001)

CHOI, A.C.K.

 

 

Films, videos

 

 

 

1

"Hong Kong Designed Instrument for Mars". BBC Tomorrow's World, United Kingdom, 6 minutes (2001)

(NG, T C), YUNG, K L, YU, C H, (CHAN, C C) and WONG, H C

 

 

Participation in exhibits

 

 

 

1

"Presentation of Ecodesign Program for Hong Kong Electrical Appliance Manufacturers". Linkage Exhibition, Convention & Exhibition Centre, Hong Kong (2001)

CHOI, A.C.K.

2

"Presentation of Advanced Manufacturing Technology Research Centre". Linkage, HK Plas, HK Pack 2001, Hong Kong Convention and Exhibition Centre, Hong Kong (16-19 March 2001)

LEE, W.B. and TO, S.

3

"Presentation of China Manufacturing Collaboration Portal". Hong Kong Information Infrastructure Expo & Conference, Hong Kong Convention and Exhibition Centre, Hong Kong (22-25 February 2001)

LEE, W.B. and TO, S.

4

"Presentation of Ultra-precision Machining Centre". 8th South China International Machinery & Materials Exhibition, China Foreign Trade Centre, Guangzhou (28-31 May 2001)

LEE, W.B. and TO, S.

5

"Design-and-Make Project Competition and Exhibition". Hong Kong (2001) (Supported by the University Grant Committee)

TANG, C.Y., LEUNG, P.W. and LIU, P.Y.

 

 

Patents applied for

 

 

 

1

"Cobalt-Molybdenium-Phosphorus Alloy Diffusion Barrier Coatings". US Patent Application No.09/794,390 (2001)

MAN, H.C., NG, W.Y., YEUNG, C.H., LEE, C.Y., SIU, C.L., (TSUI, Y.C.) and (YEUNG, L.K.)

2

"Cobalt-Tungsten-Phosphorus Alloy Diffusion Barrier Coatings, Methods for their preparation, and their use in plated articles". US Patent Application No. 09/794,395 (2001)

MAN, H.C., NG, W.Y., YEUNG, C.H., LEE, C.Y., SIU, C.L., (TSUI, Y.C.) and (YEUNG, L.K.)

3

"Nickel electroforms". US Patent (Application No. 09/860,758) (2001)

WONG, KAM PO*, CHAN, KANG CHEUNG and YUE, TAI MAN

 

 

Other outputs

 

 

 

1

"1010 Award for Innovation". 2000 Leader of the Year Awards, Singtao Holdings, Hong Kong iMail, CNBC, 1010, Hong Kong (March 2001)

(NG, T C), YUNG, K L, YU, C H and (CHAN, C C)

2

"The Most Innovative Item Award". "The Ten Engineering Wonders in Hong Kong " Election, The Hong Kong Institution of Engineers, Hong Kong (2000)

(NG, T C), YUNG, K L, YU, C H, (CHAN, C C) and WONG, H C

 

 


[Department of Industrial and Systems Engineering] [Outputs and Publications]