Department of Industrial and Systems Engineering
List of Research Outputs by Academic Staff (2002-03)
(Authors not Members of the Department are in bracket)

 

Academic Research: Refereed

 

 

Research book or monograph (author)

 

1

Surface Generation in Ultra-precision Diamond Turning: Modelling and Practices. 1st Ed. Professional Engineering Publishing Limited, London and Bury St Edmunds, UK, 267pp (2003) ISBN 1 86058 398 9

CHEUNG, C.F. and LEE, W.B.

 

 

 

 

Chapter in an edited book (author)

 

1

"Integrated QFD and Knowledge Management System for the Development of Common Product Platform ". In Angappa Gunasekaran, Omar Khalil and Syed Mahbubur Rahman, eds., Knowledge and Information Technology Management: Human and Social Perspective, Idea Group Publishing, USA, pp.51-71 (2003)  ISBN 1-59140-032-5

CHUNG, W.W.C. ,  (TAM, COLIN K.S.) and CHAN, MICHAEL F.S.#

 

 

 

 

Edited book (editor)

 

1

Proceedings of the 3rd International Conference on Quality & Reliability. RMIT University, Melbourne, Australia, 437pp (2002) ISBN 0-86459-218-3

(SUBIC, A.J.) ,  TSANG, H.C. ,  TANG, C.Y. and (NETHERWOOD, G.)

 

 

 

 

Publication in refereed journal

 

1

"基於協同技術的校園網絡咨詢系統研究" 計算機應用研究 Vol. 20, No. 1, pp.17-22 (2003)  

ZHAN, H.F. ,  LEE, W.B. and (GU, X.J.)

2

"基於企業協同協議的協同設計系統研究" 中國機械工程 Vol. 14, No. 6, pp.482-485 (2003)  

ZHAN, H.F. ,  LEE, W.B. and (GU, X.J.)

3

"基於异地協同技術的網上虛擬課堂研究" 計算機工程與應用 Vol. 38, No. 10, pp.44-46 (2002)  

ZHAN, H.F. ,  (GU, X.J) and LEE, W.B

4

"基於網絡的協同知識管理系統(NCKMS)研究" 計算機工程與應用 No. 14, pp.28-30 (2002)  

ZHAN, H.F. ,  LEE, W.B. and (GU, X. J.)

5

"基於網絡的企業參考模型庫" 機械科學與技術 Vol. 22, No. 1, pp.145-148 (2003)  

ZHAN, H.F. ,  LEE, W.B. and (GU, X.J.)

6

"A fuzzy AHP approach to the determination of importance weights of customer requirements in quality function deployment". Journal of intelligent manufacturing, Vol. 13, No. 5, pp.367-378 (2002)

BAI, H. and KWONG, C.K.

7

"A Fuzzy Multi-Criteria Decision Support Procedure for Enhancing Information Delivery in Extended Enterprise Networks". Engineering Application of AI, Vol. 16, No. 1, pp.1-9 (2003)

LAU, H.C.W. ,  JIANG, B. ,  LAU, P.K.H. ,  (PUN, K.F.) ,  (CHIN, K.S.) and WONG, C.W.Y.

8

"A Generic Management Information System For Small and Medium Enterprises ". International Journal of Manufacturing Technology and  Management, Vol. 5, No. 1/2, pp.162-176 (2003)

LAU, H.C.W. ,  CHOY, K.L. ,  WONG, C.W.Y. and (FUNG, R.Y.K.)

9

"A Generic Supplier Management Tool for Outsourcing Manufacturing ". Supply Chain Management, An International Journal, Vol. 8, No. 2, pp.140-154 (2003)

CHOY, K.L. and LEE, W.B.

10

"A Generic Tool for the Selection and Management of Supplier Relationships in an Outsourced Manufacturing Environment - The Application of Case Based Reasoning ". Logistics Information Management, Vol. 15, No. 4, pp.235-253 (2003)

CHOY, K.L. and LEE, W.B.

11

"A heuristic algorithm for machine assignment in cellular layout ". Computers & Industrial Engineering, Vol. 44, No. 1, pp.49-73 (January 2003)

(CHAN, W.M.) ,  CHAN, C.Y. and IP, W.H.

12

"A key to TQM benefits: manager involvement in customer processes ". International journal of services technology and management, Vol. 4, No. 1, pp.14-29 (2003)

YEUNG, WING SHUN VINCENT and (ARMSTRONG, ROBERT W.)

13

"A Measurement-Communication-Recognition Framework of Corporate Culture Change: An Empirical Study". Human Factors and Ergonomics in Manufacturing, Vol. 12, No. 4, pp.365-382 (2002)

(CHIN, K.S.) ,  (PUN, K.F.) ,  (HO, A.S.K.) and LAU, H.C.W.

14

"A model for assessing ideas for new venture products ". Business Process Management Journal, Vol. 9, No. 1, pp.60-68 (2003)

(SAN, SAMUEL H.T.) and CHUNG, W.W.C.

15

"A Multi-perspective Knowledge-based System for Customer Service Management ". Expert Systems with Applications, Vol. 24, No. 4, pp.455-468 (2003)

CHEUNG, C.F. ,  LEE, W.B. ,  WANG, W.M. ,  CHU, K.F. and TO, S.

16

"A Multiple-Criteria Environmental Impact Assessment for Plastic Injection Molding Process: A Methodology ". Journal of Cleaner Production, Vol. 11, No. 1, pp.41-49 (2002)

(PUN, K.F.) ,  (HUI, I.K.) ,  (LEWIS, W.G.) and LAU, H.C.W.

17

"A Security Model for Distributed Product Data Management System ". Computers in Industry, Vol. 50, No. 2, pp.179-193 (February 2003)

LEONG, K. K.# ,  YU, K. M. and LEE, W. B.

18

"A study of the melt flow behaviour of ABS/CaCO3 composites ". Journal of Materials Processing Technology, Vol. 138, pp.408-410 (2003)

TANG, C.Y. and (LIANG, J.Z.)

19

"A web-based collaborative product design platform for dispersed network manufacturing". Journal of Materials Processing Technology, No. 138, pp.600-604 (2003)

ZHAN, H.F. ,  LEE, W.B. ,  CHEUNG, C.F. ,  KWOK, S.K. and (GU, X.J.)

20

"Achieving breakthrough performance improvement:results of implementing a fit-for-purpose total management system ". The TQM Magazine, Vol. 14, No. 5, pp.293-296 (2002)

(CHAN, Y.K.) ,  (GAFFNEY, P) ,  (NEAILEY, K) and IP, W.H.

21

"Ageing characteristics of cast Zn-Al based alloy (ZnAl7Cu3)". Journal of Materials Science, Vol. 38, pp.1945-1952 (May 2003)

ZHU, Y.H. ,  LEE, W.B. and TO, S.

22

"Ageing characteristics of furnace cooled eutectoid Zn-Al Based alloy ". J. Mater. Sci., Vol. 38, pp.2925-2934 (2003)

ZHU, Y.H. ,  MAN, H.C. ,  (DORANTES ROSALES, H.J.) and LEE, W.B.

23

"Aging property of unimodal failure rate models ". Reliability Engineering and System Safety, Vol. 79, No. 1, pp.113-116 (2003)

JIANG, R. ,  JI, P. and XIAO, XINHUA

24

"An Analytical Solution to the Forward Kinematics of a 3 DOF Planar Parallel Manipulator ". IEEE Transactions on Robotics and Automation, Vol. 18, No. 4, pp.647-649 (2002)

JI, P. and WU, H. T.

25

"An Automatic System Designed for the Monitoring of Cutting Tools Using Real-time Control Concepts and Fuzzy Approaches ". International Journal of Computer Integrated Manufacturing, Vol. 15, No. 3, pp.379-393 (2002)

(IP, R.W.L.) ,  (HUI, I.K.) ,  LAU, H.C.W. and (CHAN, F.T.S.)

26

"An Effectiveness-Centred Approach to Maintenance Management: A Case Study ". Journal of Quality in Maintenance Engineering, Vol. 8, No. 4, pp.346-348 (2002)

(PUN, K.S.) ,  (CHIN, K.S.) ,  (CHOW, M.F.) and LAU, H.C.W.

27

"An Environmental Impact Scoring System for Manufactured Products ". International Journal of Advanced Manufacturing Technology, Vol. 19, pp.302-312 (2002)

(HUI, I.K.) ,  LAU, H.C.W. ,  (CHAN, H.S.) and (LEE, K.T.)

28

"An experimental study of shear damage and failure of aluminium alloy 2024T3 ". Journal of Materials Processing Technology, Vol. 139, pp.208-211 (2003)

TANG, C.Y. ,  LEE, T.C. and RAO, B.

29

"An experimental study of shear damage using in-situ single shear test ". International Journal of Damage Mechanics, Vol. 11, pp.335-353 (2002)

TANG, C.Y. ,  LEE, T.C. ,  RAO, B. and (CHOW, C.L.)

30

"An organizational culture and the empowerment for change in SMEs in the Hong Kong Manufacturing industry ". Journal of Materials Processing Technology, Vol. 139, No. 1-3, pp.505-509 (2003)

CHU, K F

31

"Analysis of hot limit strains of a superplastic 5083 aluminimum alloy under biaxial tension ". Int. J. Mech. Sci, Vol. 44, No. 7, pp.1467-1478 (2002)

CHAN, KC and CHOW, KK#

32

"Analysis of laser gas nitrided titanium by X-ray photoelectron spectroscopy ". Applied Surface Science, Vol. 199, No. 1-4, pp.293-302 (2002)

MAN, HC ,  CUI, ZD and (YANG, XJ)

33

"Application of ANN and fuzzy logic in a case based system for initial process parameter setting of injection molding ". Journal of intelligent manufacturing, Vol. 13, No. 3, pp.165-176 (2002)

MOK, S.L.# and KWONG, C.K.

34

"Application of Value Delivery System (VDS) and Performance Benchmarking in Flexible Business Process Reengineering ". International Journal of Operations and Production Management, Vol. 23, No. 3, pp.300-315 (April 2003)

CHAN, TH# ,  YUNG, WKC and (MOK, AKS)

35

"Cavitaqtion erosion resistance of heat treated NiTi ". Materials Science and Engineering A -Structure, Vol. 339, No. 1-2, pp.312-317 (2003)

CHENG, F.T. ,  SHI, P and MAN, H.C.

36

"Cavitation erosion behaviour of laser clad Ni-Cr-Fe-WC on brass ". Materials Research Bulletin, Vol. 37, No. 7, pp.1341-1351 (2002)

TAM, K.F. ,  CHENG, F.T. and MAN, H.C.

37

"Cavitation erosion resistance of stainless steel laser clad with WC-reinforced MMC ". Materials Letters, Vol. 57, No. 4, pp.969-974 (2002)

CHENG, F.T. ,  (KWOK, C.T.) and MAN, H.C.

38

"Cavitation erosion-corrosion characteristics of laser surface modified NiTi shape memory alloy ". Surface and Coatings Technology, Vol. 162, No. 2-3, pp.147-153 (2003)

CUI, Z.D. ,  MAN, H.C. ,  CHENG, F.T. and YUE, T.M.

39

"Characterisation of the laser gas nitrided surface of NiTi shape memory alloy ". Applied Surface Science, Vol. 208, pp.388-393 (2003)

CUI, ZD ,  MAN, HC and YANG, XJ

40

"Combining Scoring Method and Fuzzy Expert Systems Approach to Supplier Assessment: a Case Study ". Integrated Manufacturing Systems, Vol. 13, No. 7, pp.512-519 (2002)

KWONG, C.K. ,  IP, W.H. and CHAN, J.W.K.

41

"Comments on: A New Aggregation Method in a Fuzzy Environment ". Decision Support Systems, Vol. 35, No. 3, pp.435-439 (2003)

JIANG, R. ,  JI, P. and LEE, W. B.

42

"Concurrent design of low power transformers : a case based reasoning approach ". Journal of materials processing technology, Vol. 128, pp.136-141 (2002)

KWONG, C.K. and TAM, S.M.

43

"Corrosion behavior of aluminum 2009/SiC composite machined to different conditions ". J of Materials Science Letters, Vol. 21, No. 14, pp.1069-1072 (2002)

YUE, TM ,  YU, JK and MAN, HC

44

"Corrosion resistance of laser fabricated metal-matrix composite layer on stainless steel 316L ". Journal of Laser Application, Vol. 15, No. 2, pp.107-114 (2003)

LO, K.H. ,  (KWOK, C.T.) ,  CHENG, F.T. and MAN, H.C.

45

"Cost-effective solid reconstruction from X-ray image ". Journal of Materials Processing Technology, Vol. 121, No. 2, pp.207-216 (2002)

SHUM, S. S. P.# ,  (LAU, W. S.) ,  (YUEN, M. M. F.) and YU, K. M.

46

"Dependency of densification properties on cell topology of metal foams ". Scripta Mater, Vol. 48, No. 8, pp.1147-1152 (2003)

CHAN, KC and XIE, LS

47

"Design and Implementation of an Integrated Knowledge System ". Knowledge-Based Systems, Vol. 16, No. 2, pp.69-76 (2003)

LAU, H.C.W. ,  WONG, C.W.Y. ,  (HUI, I.K.) and (FUN, K.F.)

48

"Design of a reconfigurable workflow system for rapid product development ". Business Process Management Journal, Vol. 9, No. 1, pp.33-45 (2003)

TAM, SAMSON# ,  LEE, W.B. ,  CHUNG, W.W.C. and (NAM, ELIZABETH L.Y.)

49

"Design of an Intelligent Supplier Relationship Management System - A Hybrid Case-based Neural Network Approach". Expert Systems with Applications, Vol. 24, No. 2, pp.225-237 (2003)

CHOY, K.L. ,  LEE, W.B. and (LO, VICTOR)

50

"Development of a Case Based Intelligent Customer-Supplier Relationship Management System". Expert Systems with Applications, Vol. 23, No. 3, pp.281-297 (2002)

CHOY, K.L. ,  LEE, W.B. and (LO, VICTOR)

51

"Development of a Knowledge-Based Self-assessment System for Measuring Organisational Performance ". Expert Systems with Application, Vol. 24, No. 4, pp.443-455 (2003)

(CHIN, K.S.) ,  (PUN, K.F.) and LAU, H.C.W.

52

"Development of a Virtual Training Workshop in Ultra-precision Machining ". International Journal of Engineering Education, Vol. 18, No. 5, pp.584-596 (2002)

LEE, W.B. ,  LI, J.G. and CHEUNG, C.F.

53

"Development of A Web-based Enterprise Collaborative Platform for Networked Enterprise ". Journal of Business Process Management, Vol. 9, No. 1, pp.46-59 (2003)

LEE, W.B. ,  CHEUNG, C.F. ,  LAU, H.C.W. and CHOY, K.L.

54

"Development of an EMS Planning Framework for Environmental ". International Journal of Quality and Reliability Management, Vol. 19, No. 5, pp.688-709 (2002)

(PUN, K.F.) ,  (HUI, I.K.) ,  LAU, H.C.W. ,  (LAW, H.W.) and (LEWIS, W.G.)

55

"Development of an intelligent customer-supplier relationship management system: the application of case-based reasoning ". Industrial Management and Data Systems, Vol. 103, No. 4, pp.263-274 (2003)

CHOY, K.L. ,  FAN, K.K.H.# and (LO, VICTOR)

56

"Digital Factory - A Technology Show Case for Teaching and Research in Digital Manufacturing". Mechanical and Electrical Engineering Technology, Vol. 31, No. 6, pp.109-111 (2002)

CHAN, DSK

57

"Direct tool-path generation from massive point input ". Trans. of IMechE Part B: Journal of Engineering Manufacture, Vol. 216, No. B2, pp.199-206 (2002)

CHUI, K. L.# ,  LEE, T. C. and YU, K. M.

58

"Discussion on Some Basic Problems for ERP ". China Mechanical Engineering, Vol. 13, No. 17, pp.1499-1502 (2002)

(CHEN, B) ,  IP, W.H. and (LI, Y)

59

"Effect of electrolytic hydrogen pre-charging on the cavitation erosion resistance of NiTi: a preliminary study ". Scripta Materialia, Vol. 47, No. 2, pp.89-94 (2002)

CHENG, F.T. ,  SHI, P and MAN, H.C.

60

"Effect of processing conditions on the corrosion performance of laser surface melted AISI 440C martensitic stainless steel ". Surface and Coatings Technology, Vol. 166, No. 2-3, pp.221-230 (2003)

(KWOK, C.T.) ,  LO, K.H. ,  CHENG, F.T. and MAN, H.C.

61

"Effect of Reinforcement on Surface Finish in Ultra-precision Diamond Turning of Al/SiC Metal Matrix Composites ". Scripta Materialia, Vol. 47, No. 2, pp.77-82 (2002)

CHEUNG, C.F. ,  CHAN, K.C. ,  TO, S. and LEE, W.B.

62

"Effects of two damage mechanisms on effective elastic properties of particulate composites ". Composites Science and Technology, Vol. 62, pp.1397-1406 (2002)

SHEN, W. ,  TANG, C.Y. ,  TSUI, C.P.# and PENG, L.H.

63

"Electron microscopy study of excimer laser-treated Ti-6A1-4V ". J of Materials Science Letters, Vol. 21, No. 24, pp.1907-1910 (2002)

MEI, Z ,  YUE, TM and YU, JK

64

"Enhanced wear performance of ultra high molecular weight polyethylene crosslinked by organosilane ". Journal o f Materials Science: Materials in Medicine, Vol. 13, pp.1065-1069 (2002)

TANG, C.Y. ,  XIE, X.L. ,  (WU, X.C.) ,  (LI, R.K.Y.) and (MAI, Y.W.)

65

"Excimer laser ablation of glass fiber in reinforced polymer ". Materials and Manufacturing Processes, Vol. 17, No. 6, pp.783-788 (2002)

YUE, TM ,  MEI, SM and CHAN, KC

66

"Experimental investigation into shaping particle-reinforced material by WEDM-HS ". Journal of Materials Processing Technology, Vol. 129, No. 1-3, pp.56-59 (2002)

(GUO, ZN) ,  (WANG, X) ,  (HUANG, ZG) and YUE, TM

67

"Experimental Study of the Effects of a Change of Tool Geometry on Blanked Edges of Fine-Blanked Parts ". Key Engineering Materials, Vol. 233-236, pp.443-448 (2003)

CHAN, LC ,  LEE, TC and LEUNG, YC#

68

"Expert System for Manufacturability and Cost Evaluation ". Materials and Manufacturing Process, Vol. 17, No. 6, pp.855-865 (2002)

CHAN, DSK

69

"Fabrication of graded nickel-quasicrystal composite by electrodeposition ". T I Met Finish, Vol. 80, pp.210-213 (2002)

CHAN, KC ,  QU, NS and (ZHU, D)

70

"Factory-on-Demand and Smart Supply Chains: The Next Callenge ". Int'l J. of Manufacturing Technology and Managment, Vol. 4, No. 5, pp.372-383 (2002)

(NOORI, HAMID) and LEE, W.B.

71

"Ferroelectric fatigue versus electronic structure of lead Titanium Perovskite system ". Ferroelectrics, Vol. 281, pp.163-169 (December 2002)

FANG, X ,  YUNG, KC ,  (WU, MT) and (XI, Y)

72

"Flexible Workflow Integration :  an Object Technology Approach ". Industrial Management & Data Systems, Vol. 103, No. 3, pp.167-176 (2003)

LAU, H.C.W. ,  LEE, W.B. and LAU, P.K.H.

73

"Flory-Huggins interaction parameters of LCP/thermoplastic blends measured by DSC analysis ". Journal of Thermal Analysis and Calorimetry, Vol. 70, pp.541-548 (2002)

(XIE, X.L.) ,  (LI, R.K.Y.) ,  (TJONG, S.C.) and TANG, C.Y.

74

"Formability of a high-strain-rate superplastic Al-4.4Cu-1.5Mg/21Sic(w) composite under biaxial tension ". Mat Sci Eng A-Struct, Vol. 340, No. 1-2, pp.49-57 (2003)

CHAN, KC and TONG, GQ

75

"Friction Induced Fluctuation of Cutting Forces in Diamond Turning of Aluminium Single Crystals". Proceedings of The Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 217, No. B5, pp.615-631 (2003)

LEE, W.B. ,  CHEUNG, C.F. and TO, S.

76

"High repetition rate effect on the chemical characteristics and composition of Upilex-S polyimide ablated by UV Nd:YAG laser ". Surface and Coatings Technology, Vol. 160 (1), pp.1-6 (October 2002)

YUNG, KC ,  ZENG, D and YUE, TM

77

"How IMS can achieve ISO 9001:2000 certification ". The TQM Magazine, Vol. 14, No. 6, pp.345-349 (2002)

(CHAN, Y.K.) ,  (KAM, JACOB) ,  (NEAILEY, K) and IP, W.H.

78

"Implementing ERP through continuous improvement ". Int. J. Manufacturing Technology and Management, Vol. 4, No. 6, pp.465-478 (2002)

IP, W.H. ,  (CHAU, K.Y.) and (CHAN, S.F.)

79

"Improvement of cavitation erosion resistance of AISI316 stainless steel by laser surface alloying using fine WC powder". Surface and Coatings Technology, Vol. 165, No. 3, pp.258-267 (2003)

LO, K.H. ,  CHENG, F.T. ,  (KWOK, C.T.) and MAN, H.C.

80

"Influence of Cutting Friction on the Anisotropy of Surface Properties in Ultra-precision Machining of Brittle Single Crystals ". Scripta Materialia, Vol. 48, No. 8, pp.1213-1218 (2003)

CHEUNG, C.F.

81

"Investigation on laser surface alloying of copper on high nickel austenitic ductile iron ". Material Science and Engineering A, Vol. 333, No. 1-2, pp.223-231 (August 2002)

ZENG, DW ,  (XIE, CS) and YUNG, KC

82

"Investigation on the reconfigurable cell control system for agile manufacturing ". Int. Journal of Production Research, Vol. 40, No. 15, pp.3709-3723 (2002)

(ZHANG, J) ,  (CHAN, F.T.S.) ,  (LI, P) ,  LAU, H.C.W. ,  (IP, R.W.L.) and (SAMARANAYAKE, P)

83

"Kinematics Analysis for an offset 3-UPU Translational Parallel Robotic Manipulator". Robotics and Autonomous Systems, Vol. 42, No. 2, pp.117-123 (2003)

JI, P. and WU, H. T.

84

"Mechanical and Thermal Properties of ABS-CaCO3 Composites ". Journal of Reinforced Plastics and Composites, Vol. 21, No. 15, pp.1337-1345 (2002)

TANG, C.Y. ,  CHAN, L.C. ,  (LIANG, J.Z.) ,  CHENG, K.W.E. and (WONG, T.L.)

85

"Meso-structured composite coating on SAE 1045 carbon steel synthesized in situ by laser surface alloying ". Materials Letters, Vol. 56 (5), pp.680-684 (October 2002)

ZENG, DW ,  (XIE, CS) and YUNG, KC

86

"Methodology for Monitoring Supply Chain Management : A Fuzzy Logic Approach ". Logistics Information Management, Vol. 15, No. 4, pp.271-280 (2002)

LAU, H.C.W. ,  PANG, W.K. and WONG, C.W.Y.

87

"Monitoring Supply of Products in a Supply Chain Environment : A Fuzzy Neural Approach ". Expert Systems, Vol. 19, No. 4, pp.235-243 (2002)

LAU, H.C.W. ,  (HUI, I.K.) ,  (CHAN, F.T.S.) and WONG, C.W.Y.

88

"Near threshold UV-laser ablation of Kapton film investigated by X-ray photoelectron spectroscopy ". Journal of Materials Research, Vol. 18, No. 1, pp.53-59 (January 2003)

ZENG, D ,  YUNG, KC and (XIE, CS)

89

"Numerical analysis of effective properties of non-homogeneous elastic solids with super element ". Journal of Huazhong University of Science and Technology (Nature Science Edition), Vol. 30, No. 10, pp.114-116 (2002)

FAN, J.P.# and TANG, C.Y.

90

"Numerical simulation of a sheet metal extrusion process by using thermal-mechanical coupling EAS FEM ". Journal of University of Science and Technology Beijing, pp.378-382 (2002)

(CHEN, Z.H.) ,  LEE, T.C. and TANG, C.Y.

91

"Numerical simulation of fine-blanking process using a mixed finite element method ". International Journal of Mechanical Sciences, Vol. 44, pp.1309-1333 (2002)

CHEN, Z.H.# ,  TANG, C.Y. ,  LEE, T.C. and CHAN, L.C.

92

"On A Responsive Replenishment System: A Fuzzy Logic Approach ". Expert Systems, Vol. 20, No. 1, pp.20-32 (2003)

LEUNG, R.W.K.# ,  LAU, H.C.W. and KWONG, C.K.

93

"On an Adaptive Product Development System:  A Hybrid Database Approach ". Integrated Manufacturing Systems, Vol. 14, No. 1, pp.57-68 (2003)

LEE, C.K.M.# ,  LAU, H.C.W. and YU, K.M.

94

"Organization structure and enterprise modelling in ERP realisation ". Int. J. Networking and Virtual Organization, Vol. 1, No. 2, pp.170-183 (2002)

IP, W.H. and (CHEN, B)

95

"Organization Structure in ERP and Analysis of BPR ". Computer Integrated Manufacturing Systems, Vol. 8, No. 5, pp.404-408 (2002)

(CHEN, B) and IP, W.H.

96

"Process Tolerance Control in a 2D Angular Tolerance Chart ". International Journal of Advanced Manufacturing Technology, Vol. 20, No. 9, pp.649-654 (2002)

JI, P. and XUE, J. B.#

97

"Profile tracking performance of low ripple hybrid stepping motor servo drive". IEE Proceedings Control Theory and Applications, Vol. 150, No. 1, pp.69-76 (Jan 2003)

CHEN, W.D.# and YUNG, K.L.

98

"Pulse electrodeposition of nanocrystalline nickel using ultra narrow pulse width and high peak current density ". Surface and Coatings Technology, Vol. 168, pp.123-128 (2003)

(QU, NS) ,  (ZHU, D) ,  CHAN, KC and (LEI, WN)

99

"Random orientation of in situ composites based on liquid-crystalline polymers by compression moulding ". Polymer International, Vol. 52, pp.310-315 (2003)

(XIE, X.L.) ,  (YANG, T.Q.) and TANG, C.Y.

100

"Required Characteristics of Statistical Distribution Models for Life Cycle Cost Estimation ". International Journal of Production Economics, Vol. 83, No. 2, pp.185-194 (2003)

JIANG, R. ,  (ZHANG, W. J.) and JI, P.

101

"Research on relationship between virtual enterprise and ERP ". Journal of Management Science in China, Vol. 5, No. 5, pp.62-72 (2002)

(CHEN, B) ,  IP, W.H. and (LI, Y)

102

"Simulation Modelling in Virtual Manufacturing Analysis for Integrated Product and Process Design ". Assembly Automation, Vol. 23, No. 1, pp.69-74 (2003)

CHAN, DSK

103

"Simulation of necking using a damage coupled finite element method ". Journal of Materials Processing Technology, Vol. 139, pp.510-513 (2003)

TANG, C.Y. ,  FAN, J.P. and LEE, T.C.

104

"Software Process Improvement Strategy for Enterprise Information Systems Development ". Int. J. Information Technology and Management, Vol. 1, No. 2, pp.225-241 (2002)

(FUNG, R.Y.K.) ,  (TAM, W.T.) ,  IP, A.W.H. and LAU, H.C.W.

105

"Surface characteristics and corrosion behaviour of laser surface nitrided NiTi shape memory alloy for biomedical applications ". Journal of Laser Applications, Vol. 14, No. 4, pp.242-247 (2002)

MAN, HC ,  CUI, ZD and YUE, TM

106

"Tailor-welded blanks of different thickness ratios effects on forming limit diagrams ". Journal of Materials Processing Technology, Vol. 132, pp.95-101 (2003)

CHAN, LC ,  LEE, TC and CHAN, SM#

107

"The development of a network strategy for continuous improvement in SME: A case study ". International Journal of Networking and Virtual Organization, Vol. 1, No. 2, pp.115-124 (2002)

CHUNG, W.W.C. and (WONG, T.S.)

108

"The effect of excimer laser surface treatment on the pitting corrosion fatigue behaviour of aluminium alloy 7075 ". Journal of Materials Science, Vol. 38, No. 12, pp.2689-2702 (2003)

CHAN, C.P.# ,  YUE, T.M. and MAN, H.C.

109

"The effect of inertial normal force on rolling friction of a soft sphere on a hard plane". Europhysics Letters, Vol. 61, No. 5, pp.620-624 (March 2003)

XU, Y and YUNG, K.L.

110

"The grain size dependency of compressive deformation of a superplastic 3 mol% yttria stabilized tetragonal zirconia ". Mat Sci Eng A-Struct, Vol. 336, No. 1-2, pp.263-269 (2002)

(TONG, GQ) ,  CHAN, KC ,  (GAO, L) and (LIN, ZR)

111

"The Single Machine Ready Time Scheduling Problem with Fuzzy Processing Times ". Fuzzy Sets and Systems, Vol. 127, pp.117-129 (2002)

(WANG, C) ,  (WANG, D) ,  IP, W.H. and YUEN, D.W.

112

"The State of the Art in Simulation Study on FMS Scheduling : A Comprehensive Survey ". International Journal of Advanced Manufacturing Technology, Vol. 19, No. 11, pp.830-849 (2002)

(CHAN, F.T.S.) ,  (CHAN, H.K.) and LAU, H.C.W.

113

"The stress state dependence of cavitation in commercial superplastic Al5083 alloy ". Mater Lett, Vol. 56, No. 1-2, pp.38-42 (2002)

CHAN, KC and CHOW, KK#

114

"Tool path generation of multi-material assembly for rapid manufacture ". Rapid Prototyping Journal, Vol. 8, No. 5, pp.277-283 (2002)

ZHU, W. M.# and YU, K. M.

115

"Toolpath Generation for Fractal Curve Making ". International Journal of Advanced Manufacturing Technology, Vol. 19, pp.32-48 (2002)

SOO, S. C.# and YU, K. M.

116

"Uncertainty Analysis of On-machine Motion and Profile Measurement with Sensor Reading Errors ". Measurement Science and Technology, Vol. 13, No. 12, pp.1937-1945 (2002)

YANG, S.M. ,  FUNG, ERIC H.K. and CHIU, W.M.

117

"Understanding ERP- A Conceptual Transformation ". Industrial Engineering and Management, Vol. 7, No. 3, pp.31-35 (2002)

(CHEN, B) and IP, W.H.

118

"Use of EBSD to study stress induced microstructural changes in Zn-Al based alloy". Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 348, pp.6-14 (May 2003)

ZHU, Y.H. ,  LEE, W.B. and TO, S.

119

"UV laser micro-machining of piezoelectric ceramic using a pulsed Nd:YAG laser ". Applied Physics A: Materials Science and Processing, Vol. 75, No. 1-7 (December 2002)

ZENG, DW ,  (LI, K) ,  YUNG, KC ,  CHAN, HLW ,  CHOY, CL and (XIE, CS)

120

"VDAS: A Virtual Design and Assembly System in a Virtual Reality Environment ". Assembly Automation, Vol. 22, No. 4, pp.337-342 (2002)

JI, P. ,  CHOI, ALBERT C. K. and TU, LIZHONG

121

"Wear performance of ultrahigh molecular weight polyethylene/quartz composites ". Biomaterials, Vol. 24, pp.1889-1896 (2003)

XIE, X.L. ,  TANG, C.Y. ,  (CHAN, KATHY Y.Y.) ,  (WU, X.C.) ,  TSUI, C.P. and CHEUNG, C.Y.#

 

 

 

 

Academic Research: Not Refereed

 

 

Publication in policy or professional journal

 

1

"A New Theory for Machining Sculptured Surface ". Mechanical & Electrical Engineering Magazine, Vol. 19, No. 6, pp.1-3 (November 2002)

(PAN, JING-PING) ,  CHAN, C.Y. and (LIU, HU-RAN)

2

"A Performance Measurement System for Evaluating Maintenance Logistics in Dragon Airline". Annual Journal of IIE (Hong Kong), pp.22-28 (2002-2003) , pp.22-28

(FAN, K.H.) ,  CHOY, K.L. ,  LEE, W.B. and (SHIM, G)

 

 

 

 

Academic Research: Refereed

 

 

Invited conference paper

 

1

"An approach in developing ecodesign products in China: SME perspective ". In Proceedings of Business Excellence I: Performance Measures, Benchmarking and Best Practices in New Economy, eds., Goran D. Putnik and Angappa Gunasekaran, Portugal, June 9-13, 2003, University of Minho, Braga, Portugal, Portugal, pp.727-732 (2003)

LO, V.H.S.# ,  NG, A.K.H.# and CHUNG, W.W.C.

2

"Knowledge recycling for e-solution in enhancing operation process". In Proceedings of Business Excellence I: Performance Measures, Benchmarking and Best Practices in New Economy, eds., Goran D. Putnik and Angappa Gunasekaran, Portugal, June 9-13, 2003,, University of Minho, Braga, Portugal, Portugal, pp.630-635 (2003)

WONG, A.S.F.# and CHUNG, W.W.C.

3

"Negotiation support for contract engineering and logistics service in airline operation: a case study". In Proceedings of Business Excellence I: Performance Measures, Benchmarking and Best Practices in New Economy, eds., Goran D. Putnik and Angappa Gunasekaran, Portugal, June 9-13, 2003, University of Minho, Braga, Portugal, Portugal, pp.403-409 (2003)

LEUNG, T.S.# and CHUNG, W.W.C.

4

"Study of Low-Frequency Noise in GaN-on-Si Films Obtained by Laser-Assisted Debonding ". In M. Jamal Deen, Zeynep Celik-Butler, Michael E. Levinshtein, ed., Proceedings, SPIE International Symposium on Fluctuations and Noise 2003, Vol. 5113, Santa Fe, New Mexico, USA, 1–4 June 2003, pp.on CD-ROM (2003)

CHAN, C.P. ,  LAI, P.K. ,  LEUNG, B.H. ,  YUE, T.M. and SURYA, C.

 

 

 

 

Refereed conference paper

 

1

"A Framework for Exploring the Dynamics of Autonomous Work Groups in Manufacturing Organizations". Proceedings of the 8th International Manufacturing Conference in China, Xiamen, China, 11-13 October (2002) (in CD format: panel 2-161 (ISSN0438-0479))

CHAN, JOSEPH W.K. and LEE, W.B.

2

"A Framework of a Knowledge-based System for Predictive Characterization in Ultra-precision Diamond Turning ". Proceedings of ASPE's 17th Annual Meeting, St. Louis, Missouri, USA, 20-25, pp.546-550 (2002)

CHEUNG, C.F. and LEE, W.B.

3

"A Framework of a NC Program Translator for Virtual Machining ". Proceedings of International Conference on Precision Engineering and Nanotechnology, Changsha, China, 28-30 October, pp.8-13 (2002)

LEE, W.B. ,  GAO, D. ,  CHEUNG, C.F. and LI, J.G.

4

"A Strategy and Model of Change for SMEs in the Hong Kong Manufacturing Industry ". , Proceedings of the 10th International Manufacturing Conference in China, Xiamen, China,, Xiamen, China, Oct., 2002, pp.Panel 2 (2002)

CHU, K F and (CALVERT, J R)

5

"A Supplier Management System for Benchmarking Partners and Order Management". 3rd International Conference on Quality and Reliability, Australia, 28-30 August, 2002, pp.127-132 (2002)

CHOY, K.L. and LEE, W.B.

6

"A Web-based Smart Store Platform for Collaborative Supply Chain Integration ". Proceedings of the International Conference of Advance in Production Management Systems, The Netherlands, September 2002, Kluwer Academic Publishers, pp.231-242 (2003)

KWOK, S.K. ,  LEE, W.B. and CHEUNG, C.F.

7

"An Integrated Management System Implementation Framework for Enhancing Organization Performance ". In A.J. Subic, H.C. Tsang, C.Y. Tang, G. Netherwood, ed., The 3rd International Conference on Quality & Reliability, Melbourne, Australia, 28 to 30 August, 2002, RMIT University, Melbourne, Australia, pp.71-76 (2002)

TING, K.T.# and TSANG, ALBERT H.C.

8

"An intelligent framework to support knowledge management ". In A.J. Subic and H.C. Tsang and C.Y. Tang and G. Netherwood, ed., The 3rd International Conference on Quality and Reliability, Melbourne, 28-30 Aug. 2003, Melbourne, pp.102-105 (2002)

LEUNG, R.W.K.# ,  LAU, H.C.W. and KWONG, C.K.

9

"An optimization model for aircraft service logistics". Proceedings of the 10th International Manufacturing Conference, Vol. 1, Xiamen, China, Oct., (2002) (on CD-ROM)

(CHEUNG, ANGUS) ,  IP, W.H. ,  LAI, C.L. and CHEUNG, EVA#

10

"CAE-integrated Fabrication of Functionally Graded Components ". In Li, G. L.; et al., ed., IMCC 2002, Xiamen, China, 11-13 Oct 2002, Xiamen University, China (2002) (panel 2-157. CD)

YEUNG, Y. C.# and YU, K. M.

11

"Comparative Study on Shearing Edge Quality Influence of the Change of Tool Geometry in Fine-Blanking for Ferrous Metals". 10 th International Manufacturing Conference in China (IMCC2002), Xiamen, China, October, 2002 (2002) (Panel 1-234)

CHAN, LC ,  LEE, TC and LEUNG, YC#

12

"Concurrent Mold and Process Design of Transfer Molding for Electronic Packages using Process Simulation and Design of Experiments Techniques ". In R. Goncalves and R. Roy, eds., 9th ISPE International Conference on Concurrent Engineering : Research and Applications, Cranfield, U.K., 27-31 July 2002, A.A. Balkema, Abingdon, pp.145-151 (2002)

IP, K.W.# and KWONG, C.K.

13

"Damage Modelling of Micro-Particle Reinforced Polymer Composites ". Advances in Liquid Crystalline Polymers and Supramolecules, Wuhan, China, October 2002, pp.359-365 (2002) (ISBN 7-5609-2807-2)

TSUI, C.P.# ,  FAN, J.P.# and TANG, C.Y.

14

"Dynamic Forecasting Using a Modified Least Mean Square Algorithm ". Proceedings of the 10th International Manufacturing Conference (IMCC2002), Xiamen, China, 11-13 October (2002) (1-238, CD version)

CHEUNG, C.F. ,  LEE, W.B. ,  (LO, VICTOR) and WANG, W.M.

15

"E-collaborative Technologies and Its Applications in e-Logistics ". Asian Industrial Technology Congress (AITC), Hong Kong, 29-30 August, pp.47-50 (2002)

CHEUNG, C.F. ,  KWOK, S.K. and LEE, W.B.

16

"ePAM: a New Approach to Physical Asset Management ". In A.J. Subic, H.C. Tsang, C.Y. Tang, G. Netherwood, ed., The 3rd International Conference on Quality & Reliability, Melbourne, Australia, 28 to 30 August, 2002, RMIT University, Melbourne, Australia, pp.44-50 (2002)

CHONG, DORA Y.Y.# and TSANG, ALBERT H.C.

17

"Feasibility Study of a Central Coordination System for Supply Chains ". Proceedings of the 3rd International Conference on Quality and Reliability, Melbourne, Australia, Aug., 2002, pp.106-111 (2002)

(CHAN, F T S) ,  (CHUNG, S H) ,  CHU, K F ,  LAU, H C W ,  (IP, R W) and TSIM, Y C

18

"High aspect-ratio blind microvia formation in Printed Circuit Board by laser-assisted seeding (LAS) mechanism ". Proceedings of The Third International Conference on Quality and Reliability, RMIT University, Melbourne, 28-30 August 2002, pp.393-404 (August 2002)

LEUNG, ESW# and YUNG, KC

19

"Linking Supply Chain to Product Desilgn: Proposing the P-SC/DM Framework ". EurOMA/POMS Joint International Conference, Vol. 1, COMO, Italy, June 16-18, pp.423-432 (2003)

NOORI, HAMID ,  (CHEN, CHIALIN) and LAU, FRANCIS

20

"Out-tasking and Management of Technical Service Agents in Asset Maintenance ". In A.J. Subic, H.C. Tsang, C.Y. Tang, G. Netherwood, ed., The 3rd International Conference on Quality & Reliability, Melbourne, Australia, 28 to 30 August, 2002, RMIT University, Melbourne, Australia, pp.51-56 (2002)

HUI, ENCON Y.Y. and TSANG, ALBERT H.C.

21

"Partnering to Success in an Infrastructure Construction Project ". The 16th Asian Quality Symposium, Tokyo, Japan, November 15 to 16, 2002, Japanese Society for Quality Control, Tokyo, Japan (2002) (11 pages, published on a CD-ROM)

TSANG, ALBERT H.C. and LO, DANNY H.S.#

22

"Performance Measurement in Knowledge-based Work ". The 3rd International Conference on Quality and Reliability (ICQR2002), Melbourne, Australia, 28-30 August, pp.9-14 (2002)

LEE, W.B. and CHEUNG, C.F.

23

"Quality Prediction of Microchip Encapulation using Optimal Neural Networks". In A.J. Subic and H.C. Tsang and C.Y. Tang and G. Netherwood, eds., The 3rd International Conference on Quality and Reliability, Melbourne, 28-30 Aug. 2002, Melbourne, pp.345-350 (2002)

TONG, K.W.# ,  KWONG, C.K. and YU, K.M.

24

"Re-engineering and Change of Organizational Culture for Enhancing Quality of Customer Service in a Manufacturing Company ". Proceedings of the 3rd International Conference on Quality and Reliability, Melbourne, Aug., 2002, pp.117-121 (2002)

CHU, K F

25

"Statecharts for Distributed Product Data Management System Modelling ". In Li, G. L.; et al., ed., IMCC 2002, Xiamen, China, 11-13 Oct 2002, Xiamen University, China (2002) (panel 3-178. CD)

LEONG, K. K.# ,  YU, K. M. and LEE, W. B.

26

"Surface Microstructure of Ultra-precision Machined Zn-Al Alloy". International conference on precision engineering and nano-technology, Changsha, China, 28-30 Oct., pp.77-82 (2002)

ZHU, Y.H. ,  LEE, W.B. and TO, S.

27

"Tensile stress induced microstructural changes in cast alloy ZnAl7Cu3". Ninth International Conference on composites on Composites Engineering (ICCE/9), San Diego, USA, 1-6 July, pp.39-40 (2002)

(HUI, D.) ,  ZHU, Y.H. ,  LEE, W.B. and TO, S.

28

"The Effects of Team Diversity and Autonomy Preferences on Autonomous Work Groups". Proceedings of the 4th Asia-Pacific Conference on Industrial Engineering and Management Systems, Grand Hotel, Taipei, 18-20 December, pp.1067-1070 (2002) (in CD format)

CHAN, JOSEPH W.K. and LEE, W.B.

29

"The Kinematic Team Role Behavior in Work Team". Proceedings of the 8th International Manufacturing Conference in China, Xiamen, China, 11-13 October (2002) (in CD format: panel 3-179 (ISSN0438-0479))

LEUNG, SAMUEL H.N. ,  CHAN, JOSEPH W.K. and LEE, W.B.

30

"Use of Data Mining to Support the Development of a Knowledge Intensive CAD System". International Manufacturing conference in China, Vol. 1, Xiamen, China, 24-25 Oct (2002) (on CD-ROM)

(YIP, DANIEL C.Y.) ,  CHIU, ALVIN P.C.# and LAU, K.H.

31

"Use of Knowledge Intensive CAD (KIC) in Virtual product Validation ". The Fifth IFIP WG5.2 Workshop On Knowledge Intensive CAD, Malta, 25-25 July, pp.1-17 (2002)

LAW, HENRY, MC# ,  (YIP, DAINEL C.Y.) ,  CHENG, KARENT K.P. and LAU, K.H.

32

"Wireless applications for SMEs: a case study ". In Pedro Isaias, ed., WWW/Internet 2003, Lisbon, Portugal, 13-15 November 2002, International Association for the Development of Information Society (IADIS) Press, Portugal, pp.677-680 (2002) (ISBN  972-9027-53-6)

YUEN, KARINA# and CHUNG, W.W.C.

 

 

 

 

Academic Research: Not Refereed

 

 

Other conference paper

 

1

"Cavitation erosion and corrosion behaviours of stainless steel 316 laser surface alloyed with WC ". 21st International Congress on Applications of Lasers and Electro-optics, Scottsdale, Arizona, USA, 14-17 October 2002, Laser Institute of America, USA, pp.paper no. 540 (2002)

LO, K.H. ,  CHENG, F.T. ,  MAN, H.C. and (KWOK, C.T.)

2

"Collaborative Technologies for Knowledge Work ". 4th Asia Pacific Knowledge Management Conference, Hong Kong, 28 -29 November (2002) (CD Version)

LEE, W.B. and CHEUNG, C.F.

3

"Laser surface alloying of Mo-WC on Titanium alloys ". 21st International Congress on Applications of Lasers and Electro-optics, Scottsdale, Arizona, USA, 14-17 October 2002, Laser Institute of America, USA, pp.paper no.1507 (2002)

PANG, W# ,  MAN, H.C. and YUE, T.M.

4

"Laser surface aluminizing of mild steel: microstructureal and corrosion resistance characteristics ". 21st International Congress on Applications of Lasers and Electro-optics, Scottsdale, Arizona, USA, 14-17 October 2002, Laser Institute of America, USA, pp.paper no. 539 (2002)

(KWOK, C.T.) ,  MAN, H.C. and CHENG, F.T.

5

"Laser surface nitriding and texturing of NiTi shape memory alloy for bonding with bioactive glass ". 21st International congress on Applications of Lasers and Electro-optics, Scottsdale, Arizona, USA, 14-17 October 2002, Laser Institute of America, USA, pp.paper no.308 (2002)

MAN, H.C. ,  CUI, Z.D. and YUE, T.M.

 

 

 

 

Other Outputs

 

 

Computer software or system

 

1

"Weibull Analysis ". Weibull Analysis, The Hong Kong Polytechnic University, Hong Kong (2002)

TSANG, ALBERT H.C.

 

 

 

 

Contract Research

 

 

Consulting or contract research report

 

1

"A Case Study of Ecodesign for Hong Kong Electrical Appliances Manufacturers - Kettle (Full Documentation) ".  Dept of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong (2003)

CHOI, ALBERT C.K. ,  SZE, S.N. and CHAN, NICOLE C.W.

2

"A Case Study of Ecodesign for Hong Kong Electrical Appliances Manufacturers - Toaster (Full Documentation) ".  Dept of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong (2003)

CHOI, ALBERT C. K. ,  SZE, S. N. and CHAN, NICOLE C. W.

3

"A Guide to Ecodesign of Electrical Appliances".  Dept of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong, 46pp (2002) (in Chinese)

CHOI, ALBERT C.K. ,  SZE, S.N. and CHAN, NICOLE C.W.

4

"A status report on the research of HDI technology drivers for Electronics Product Miniaturization".  Corp-Vision Creative, Hong Kong, 106pp (December 2002)

YUNG, K.C.

5

"Aesthetic Design of a Bio-tech Domestic Waste Appliance".  (2003)

TANG, C.Y. and LAI, K.T.

6

"Aesthetic design of a series of containers for domestic usage".  (2003)

TANG, C.Y.

7

"Consultancy services for the Manufacturing of a hermetically sealed device chamber for Convergence Technology Ltd ".  (2003)

MAN, H.C.

8

"Design and Diamond Turning of Optical Lens".  OKIA Optical Co. Ltd. (June 2003)

TO, SUET

9

"Design and Manufacturing a Precision Mould of View Finder".  ASIA OPTICAL INDUSTRIES LTD. (May 2003)

TO, SUET

10

"Design and Manufacturing of Precision Mould".  Apex Manufacturing Co., Ltd (November 2002)

TO, SUET

11

"Design and Manufacturing of Precision Mould".  Apex Manufacturing Co., Ltd (September 2002)

TO, SUET

12

"Design and Manufacturing of Precision Mould Inserts".  Kienzle Time (H.K.) Ltd. (May 2003)

TO, SUET

13

"Design and Manufacturing Precision Mould for 2 Elements CCD   ".  Aglient Technologies Inc. (April 2003)

TO, SUET

14

"Engineering Design of a Bio-tech Domestic Waste Appliance".  (2003)

TANG, C.Y. ,  CHENG, K.W.E. ,  LI, C.K. ,  LAI, K.T. and CHENG, RON K.C.

15

"Failure analysis of a defective pressure reducing valve for Material Lab Ltd. ".  (2002)

MAN, H.C.

16

"Failure analysis of a screw stop cock valve for Oriental Loss Adjuster Ltd. ".  (2002)

MAN, H.C.

17

"Failure analysis of fan impellers for Rhoyden-SPIE ".  (2003)

MAN, H.C. and WONG, T.T.

18

"Failure analysis of lectroplated samples for Evergood Industrial Ltd. ".  (2003)

MAN, H.C.

19

"Investigation of smutting problems during the aluminium anodising process for Finechit Metal Manufactuing Ltd ".  (2003)

MAN, H.C.

20

"Optional Design and Diamond Turning of Prototype Lens".  Tai Nam Industrial Company Ltd. (September 2002)

TO, SUET

21

"Property Analysis of Thermoplastic Rubber".  New Bright Industrial Co., Ltd. (June 2003)

TO, SUET

22

"Property Analysis of Thermoplastic Rubber".  New Bright Industrial Co., Ltd. (June 2003)

TO, SUET

23

"Prototyping of a bio-tech domestic waste appliance".  (2003)

TANG, C.Y. ,  LAI, K.T. ,  POON, Y.S. ,  LEE, T.C. and CHAN, L.C.

24

"Reliability Study of PB-Free Solder".  IDT Technology Ltd. (Apr 2003)

YUNG, K.C.

25

"Solder Joint Failure Analysis at BGA Assembly".  Elec & Eltek International Ltd. (Dec 2002)

YUNG, K.C.

26

"Transfer of warm and cold forming technology for production of stainless steel watchcases".  Giant Metal Manufactory Ltd (Feb 2003)

CHAN, LC and LEE, TC

 

 

 

 

Other Outputs

 

 

Patents issued

 

1

"Cobalt-Molybdenum-Phosphorous alloy diffusion barrier coatings ".  US Patent Office (Narch 4, 2003) (US Patent no. US6,528,184 B2)

MAN, H.C. ,  NG, W.Y. ,  YEUNG, C.H. ,  LEE, C.Y. ,  SIU, C.L.. ,  (TSUI, Y.C.) and (YEUNG, L.K.)

2

"Cobalt-Tungsten-Phosphorous alloy diffusion barrier coatings, Methods for the Preparation, and their use in plated articles ".  US Patent Office (March 4, 2003) (US Patent no. US6,528,185 B2)

MAN, H.C. ,  NG, W.Y. ,  YEUNG, C.H. ,  LEE, CY ,  SIU, C.L. ,  (TSUI, Y.C.) and (YEUNG, L.K.)

 

 

 

 

Academic Research: Refereed / Other Outputs

 

 

Journal editor

 

1

Associate Editor . Industrial Engineering Research: An International Journal of IE Theory and Application, Institute of Industrial Engineers (Hong Kong) (2002)

TANG, C.Y.

2

Guest Editors: Dr A. Gunasekaran and Mr. Walter W.C. Chung . Special Issue of Business Process Management Journal, Vol. 9, No. 1, MCB University Press Limited, UK, pp.7-10 (2003)

(GUNASEKARAN, A.) and CHUNG, W.W.C.

3

Member of Editorial Advisory Board . Journal of Quality in Maintenance Engineering, Vol. 8 to 11, MCB University Press, Bradford, U.K. (2002 to 2005)

TSANG, ALBERT H.C.

4

Regional Editor. Journal of Materials Processing Technology, Elsevier Science Publisher (Sep 2001-2003)

LEE, W.B.

 

 

 

 

Academic Research: Not Refereed

 

 

Postgraduate research theses

 

1

A Hybrid Design Support System for Die Casting Scheme. (2003)

LU, HONG YUAN#

2

A Mechanism for Implementing Total Quality Management Based on Manufacturing Resource Planning System. (2002)

CHAN, CHI KEUNG DONALD#

3

A Research in Manufacturing Strategy and Competitiveness: Models and Practices. (2002)

LEUNG, HAU NUNG#

4

A System Dynamics Approach to the Analysis and Implementation of ERP. (2002)

LAI, CHUN LAU#

5

Computer Aided Tolerance Charting for Products with Angular Features. (2003)

XUE, JIANBIN#

6

Design and Development of an Intelligent System for Process Design of Microchip Encapsulation. (2003)

TONG, KA WAI#

7

Direct Toolpath Generation from Pointcloud Input. (2002)

CHUI, KAM LUN#

8

Excimer Laser Surface Modification of High Strength Aluminium Alloys. (2002)

CHAN, CHUNG PUI#

9

Formability Analysis of Tailor-welded Blanks of Steel Sheets. (2003)

CHAN, SUI MAN#

10

Fractal Fabrication for Aesthetic Product Design. (2002)

SOO, SHIK CHEUNG#

11

Laser-Assisted Plating of Printed Circuit Board (PCB) Microvias. (2002)

LEUNG, SAU WAI ESTHER#

12

Machine Layout of Manufacturing Cell with Fix-Proportion and Varying Product Mix Pattern. (2002)

CHAN, WAI MING#

13

Meso-damage Modelling of Polymer Based Particulate Composites Using Finite Element Technique. (2002)

TSUI, CHI PONG#

14

Microstructures and Phase Transformation of Quasicrystals. (2002)

CHEUNG, YUK LIN#

15

Modelling of Multi-material Assemblies for Layered Manufacturing. (2002)

ZHU, WEIMING#

16

Process Modeling of Fine-Blanking Using Thermo-Mechanical Coupling Method. (2002)

CHEN, ZHANGHUA#

17

Rapid Jewelry Design and Prototype Making. (2002)

YOUNG, YUK YU#

18

The Design and Development of an Intelligent Planning and Scheduling Holarcy System for Flexible Manufacturing System. (2002)

KEUNG, KWOK WAI WILLIAM#

19

The Design of an Enterprise Information System Using Hierarchical Design Pyramid and Web-based Object Oriented Model. (2002)

NG, KIT CHONG#

20

The Effect of Molecular Orientation on the Mechanical Behavior of Cold-rolled Semicrystalline Polymers. (2002)

WU, SIZHU#