Department of Industrial and Systems Engineering


List of Research Outputs by Academic Staff (1996-97)

(Authors not Members of the Department are in bracket)

Scholarly books and monographs  
   
Edited book (editor)  
   
1Manufacturing Information Systems Research: Implementation in Hong Kong, The Hong Kong Polytechnic University, 201 pp., 1997. CHUNG, W.W.C.
   
Journal articles, book chapters, and other published papers  
   
Article for externally refereed journal  
   
1The processing of metal matrix composites, Journal of Materials Processing Technology, Vol. 63, pp. 339-353, 1997. (RALPH, B.), YUEN, H.C. and LEE, W.B.
2Numerical analysis of an inside-out tube inversion process, Journal of Materials Processing Technology, Vol. 66, pp. 130-136, 1997. (TAN, H.J.) and CHAN, K.C.
3The manufacture of an optical fiber coupler by the fusion elongation method, Journal of Materials Processing Technology, Vol. 63, pp. 806-809 1997. (WONG, Y.W.) and CHOY, K.L.
4Development of joint electroforming technology, Journal of Materials Processing Technology, Vol. 63, pp. 844-847, 1997. (ZHU, D.), QU, N.S. and CHAN, K.C.
5Cell control architecture for manufacturing applications, Journal of Materials Processing Technology, Vol. 66, Nos. 1-3, pp.137-145, 1997. CHAN, C. Y., (REDFORD, A.) and LAM, F. W.
6Effect of crystal rotation on earing in cup drawing of highly textured materials, Textures and Micro- structures, Vol. 26-27, pp.547-552, 1996. CHAN, K.C.
7Effect of reverse pulse current on the internal stress of electroformed nickel, Journal of Materials Processing Technology, Vol. 63, pp.819-822, 1997. CHAN, K.C., QU, N.S. and (ZHU, D.)
8Simulation of metal forming processes by volume-conversed metalmorphosis, Journal of Materials Processing Technology, Vol. 63, pp. 701-706, 1997. CHEUNG, K.K., YU, K.M. and (HUI, K.C.)
9Application of genetic algorithms in optimizing parameters in a decision support system for resource allocation, Annual Journal of the Institute of Industrial Engineering, (Hong Kong), Dec., pp.31-34, 1996. CHOY, K.L. and YEUNG, V.W.S
10Springback in the roller forming of integrated circuit leadframes, Journal of Materials Processing Technology, Vol. 66, pp. 107-111, 1997. FU, M.H., CHAN, K.C., LEE, W.B. and (CHAN, L.K.)
11The application of phase method in in-plane strain analysis, Journal of Plasticity Engineering, Vol.4, No.1, pp.1-6, 1997. GAO, Z.Y., (ZHONG, Y.X.), (CAO, Q.X.), LEE, W.B. and TANG, C.Y.
12A study of ultrasonic-aided wire electrical discharge machining. Journal of Materials Processing Technology, Vol.63, 1-3, pp.823-828, 1997. GUO, Z.N., LEE, T.C., YUE, T.M. and (LAU, W.S.)
13The design of ultrasonic transducer by means of transfer matrix method (in Chinese), J. of Electro-Machining, Vol.36, No.2, (1997), pp.8-13. GUO, Z.N., LEE, T.C., YUE, T.M. and (LAU, W.S.)
14High-strain-rate superplasticity of an Al6061-SiCw, Scripta Metallurgica et Materialia, Vol. 36, pp.593-598, 1977. HAN, B.Q. and CHAN, K.C.
15High-strain-rate superplasticity of an Al2009-SiCw composite, Journal of Materials Science Letter, Vol. 16, pp.827-829, 1997. HAN, B.Q. and CHAN, K.C.
16High-strain-rate superplasticity of SiC particulate reinforced Al-alloy 8090 composite, Applied Composites Materials, Vol. 3, pp. 369-378, 1996. HAN, B.Q., CHAN, K.C., YUE, T.M. and (LAU, W.S.)
17High temperature deformation behaviour of Al2124-SiCp composites, Journal of Materials Processing Technology, Vol. 63, pp.395-398, 1997. HAN, B.Q., CHAN, K.C., YUE, T.M. and (LAU, W.S.)
18Laser etching of polymer masked leadframes. Applied Surface Science. Vol.109/110, pp.236-241, 1997. HO, C.K., MAN, H.C., YUE, T.M., and (YUEN, C.W.)
19A methodology for the analysis and design of real-time event-driven software using TRSA/OOD integrated approach, Int. J. of Manufacturing System Design, Vol.2, (4), pp.307-322, 1995. HUI, C.S., YUNG, K.L., LAU, W.M.
20An integrated cirriculum for engineering management education in Hong Kong and China, AEESEAP Journal of Engineering Education, Dec, pp.3-7, 1996. IP, W.H.
21Rule-based ARIMA models for FMS, Journal of Materials Processing Technology, Vol. 66, pp. 240-243, 1997. IP, W.H.
22A digraphic approach for dimensional chain identification in design and manufacturing, Transactions of the ASME, Journal of Manufacturing Science and Engineering, Vol. 118, pp. 539-544, November, 1996. JI, P, (FUH, J. Y. S.), and (AHLUWALIA, R.S.)
23Hole profile and tunnelling effect in laser drilling, Chinese J. of Mechanical Engineering (English), Vol.9, No.3, Sept, pp.205-215, 1996. JIANG, C.Y., XU, J.H., YUE, T.M. and (LAU, W.S.)
24Application of case based reasoning in injection moulding, Journal of Materials Processing Technology, 63, pp. 463-467, 1997. KWONG, C.K., (SMITH, S.F.) and (LAU, W.S.)
25Application of structural analysis in the product creation process, Annual Journal of the Institute of Industrial Engineers (Hong Kong), November, pp. 20-23, 1996. KWONG, K.C. and WONG, W.C.
26Octree reinforced thin-shell rapid prototyping, Journal of Materials Processing Technology, Vol. 63, pp. 784-787, 1997. LAM, T.W., YU, K.M., CHEUNG, K.M. and (LI, C.L.)
27Further investigation on fine blanking process by large deformation theory, Journal of Materials Processing Technology, v.66, pp.258-263, 1997. LEE, T.C., CHAN, L.C. and WU, B.J.
28Application of finite-element deformation method in the fine-blanking process, Journal of Materials Processing Technology, v.63, no. 1-3, pp.744-49, 1997. LEE, T.C., CHAN, L.C. and ZHENG, P.F.
29Spark erosion with ultrasonic frequency, Journal of Materials Processing Technology, v.68, pp.83-88, 1997. LEE, T.C., ZHANG, J.H. and (LAU, W.S.)
30An investigation of process parameters in dam-bar cutting of integrated circuit packages, Journal of Materials Processing Technology, Vol. 66, pp.63-72, 1997. LEE, W.B., CHEUNG, C.F., (CHAN, L.K.) and CHIU, W.M.
31Automatic supervision of blanking tool wear using pattern recognition analysis, International Journal of Machine Tools and Manufacture, Vol. 37, Nos. 8, pp. 1079-1095, 1997. LEE, W.B., CHEUNG, C.F., CHIU, W.M. and (CHAN, L.K.)
32Damage evolution and forming limit predictions of Al2024-T3 aluminum alloy, Journal of Materials Processing Technology, vol.63, pp.100-104, 1997. LEE, W.B., TAI, W.H., and TANG, C.Y.
33Studies of melt flow properties during capillary extrusion of polycarbonate, Journal of Materials Processing Technology, vol.63, pp.501-504, 1997. LIANG, J.Z. and TANG, C.Y.
34Flow and mechanical properties of polypropylene /low density polyethylene blends, Journal of Materials Processing Technology, Vol. 66, pp. 158-164, 1997. LIANG, J.Z., TANG, C.Y. and MAN, H.C.
35Processing of advanced ceramics using the wire-cut EDM process, Journal of Materials Processing Technology, v.63, no. 1-3, pp.839-43, 1997. LOK, Y.K. and LEE, T.C.
36Heating performance of electrolytic heat-treatment in aqueous solution by pulse current, Journal of Materials Processing Technology, Vol. 63, pp.833-838, 1997. LUK, S.F., LEUNG, T.P., MIU, W.S. and (PASHBY, IAN)
37Design and characteristic analysis of supersonic nozzles for high gas pressure laser cutting. Journal of Materials Processing Technology, Vol.63, No.1-3, Jan, pp.217-22, 1997. MAN, H.C., DUAN, J. and YUE, T.M.
38Surface pretreatment of glass fibre-reinforced liquid crystal polymer composite by excimer laser for adhesive bonding. Journal of Adhesion Sci. & Technol, Vol.11, No.2, Feb, pp.183-194, 1997. MAN, H.C., LI, M. and YUE, T.M.
39Mechanical and flow properties of multi-stage recycled GR-PET, Int. J. of Plastics Rubber & Composites, 25, pp.380-384, 1997. MAN, H.C. and WONG, T.T.
40Excimer laser surface modification of engineering ceramics for adhesive bonding. Journal of Materials Processing Technology. Vol.66, Nos.1-3, April, pp.123-129, 1997. MAN, H.C., ZHANG, X.M. and YUE, T.M.
41Surface roughening in pulse current and pulse reverse current electroforming of nickel, Surface Coatings Technology, Vol. 91, pp.220-224, 1997. QU, N.S., CHAN, K.C. and (ZHU, D.)
42Study on the tool life of spade drills with and without chip breaker; Journal of Materials Processing Technology, v.63, no. 1-3, pp.193-98, 1997. SHEN, Q., (LAU, W.S.) and LEE, T.C.
43Wear characteristics and flank wear model of the main cutting edges in spade drilling of ductile metals, Wear, Vol.208, pp.73-80, 1997. SHEN, Q., LEE, T.C. and (LAU, W.S.)
44A finite-element analysis of temperature distributions in spade drilling, Journal of Materials Processing Technology, Vol. 66, pp. 112-122, 1997. SHEN, Q., LEE, T.C. and (LAU, W.S.)
45Damage analysis of crack tip zone in high impact polystyrene, Engineering Fracture Mechanics. vol.56, No.5, pp.615-621, 1997. TAI, W. H., LEE, W. B., and TANG, C. Y.
46Modelling of damage behaviours of high impact Polystyrene, Engineering Fracture Mechanics, vol.55, No.4, pp.583-591, 1996. TANG, C.Y., TAI, W.H., and LEE, W.B.
47Ultraprecision diamond turning of aluminium single crystals, Journal of Materials Processing Technology, Vol. 63, pp.157-162, 1997. TO, S., LEE, W.B. and CHAN, C.Y.
48The surface character and substructure of aluminium alloys by laser-melting treatment, Journal of Materials Processing Technology, vol.66, pp.172-178, 1997. WONG, T.T., LIANG, G.Y., and TANG, C.Y.
49Melt flow behaviour of LCP in-situ composites, Journal of Materials Processing Technology, 63, pp.519-523, 1997. XU,Q.W., MAN,H.C. and (LAU,W.S.)
50Advanced QPQ complex salt bath heat treatment, Journal of Materials Processing Technology, Vol. 66,pp 249-252, Switzerland, 1997. YEUNG, C.F., LAU, K.H., (LI, H.Y.) and (LUO, D.F.)
51Injection moulding, 'C-Mold', CAE package, process parameter design, and quality function deployment - A case study of intelligent material processing, Journal of Materials Processing Technology, Vol. 63, No. 1-3, pp. 481-487, 1996. YEUNG, V.W.S. and LAU, K.H.
52Squeeze casting of high-strength aluminium wrought alloy AA7010. Journal of Materials Processing Technology. Vol.66, April, pp.179-183, 1997. YUE, T.M.
53Analysis of ultrasonic-aided laser drilling using finite element method. CIRP Annals, Vol.45/1, pp.169-172, 1996. YUE, T.M., CHAN, T.W., MAN, H.C. and (LAU, W.S.)
54Wire electrical discharge machining of Al2O3 particle and short fibre reinforced Al-based composites. Materials Sci. and Technology, Vol. 12, Oct, pp.831-35, 1996. YUE, T.M. and DAI, Y.
55Pulsed Nd:YAG laser welding of a SiC particulate reinforced Al-alloy composite. Applied Composite Materials, Vol.4, No.1, Jan, pp.53-64, 1997. YUE, T.M., XU, J.H. and MAN, H.C.
56The values of TQM in the revised ISO 9000 quality system, International Journal of Operations and Production Management, 17 (2), pp. 108-117, 1997. YUNG, K.C.
57A stepped composite methodology to re-design manufacturing processes through re-engineering and benchmarking, International Journal of Operations and Production Management, 17 (4), pp. 375-388, 1997. YUNG, K.C.
58Investigation on welding parameters affecting the tensile properties of titanium welds, Journal of Materials Processing Technology, 63, pp. 759-764, 1997. YUNG, K.C., (RALPH, B.), LEE, W.B.,  and (FENN, R.)
59The control of thin-plate weld geometry and microstructure, Journal of Materials Processing Technology, 63, pp. 802-805, 1997. YUNG, K.C., (RALPH, B.), LEE, W.B., and (FENN, R.)
60Analysis of stepping motor torque ripple control for precision profiling, International Journal of Power and Energy Systems, IASTED, Vol 17, No.1, pp.1-7, 1997. YUNG, K.L., CHENG, K.W., (ZHOU, Z.Y.) and SONG, G.
61Study on the electro-discharge machining of a hot pressed aluminum oxide based ceramic, Journal of Materials Processing Technology, v63, no. 1-3, pp.908-12, 1997. ZHANG, J.H., LEE, T.C. and (LAU, W.S.)
62Corrosion properties of excimer laser surface treated Al-SiC metal matrix composite. Scripta Materialia, Vol.35, No.9, pp.1095-1100, 1996. ZHANG, X.M., MAN, H.C. and YUE, T.M.
63Enhancement of ceramic-to-metal adhesive bonding by excimer laser surface treatment. Materials Letters. Vol.30, April, pp.327-332, 1997 ZHANG, X.M., YUE, T.M. and MAN, H.C.
   
Article for newspaper or popular journal  
   
1The ultraprecision machining centre of PolyU, Sing Tao Daily, 6/1/1997. LEE, W.B.
   
Conference and working papers  
   
Invited conference paper  
   
1How does a sheet metal fail in biaxial stretching (Keynote), The Third Asia Pacific Symposium on Advances in Engineering Plasticity and its Application, pp.53-60, July, Japan, 1996. LEE, W.B. and CAI, M.J.
   
Refereed paper at a conference  
   
1Computer aided assembly planning and process modelling, International Conference on Manufacturing Automation, Vol.2, pp.1173-1178, April, Hong Kong, 1997. (GAO, J.X.) and IP, W.H.
2Manufacturing capacity modelling for product design, the Seventh International Machine Design and Production Conference, pp.95-101,11-13 Sept.,Turkey, 1996. (GAO. X.) and IP, W.H.
3Managing integrated manufacturing through real-time monitoring and TQM, International Conference on Manufacturing Automation, Vol.2, pp.971-977, April, Hong Kong, 1997. (TSENG, H.C.) and IP, W.H.
4Volume invariant morphing for solid & hollow rolled shape, International Conference on Shape Modeling and Applications [SMI'97], pp.226-232, March 3-6, Aizu-Wakamatsu, Japan, 1997. CHEUNG, K.K., YU, K.M. and (HUI, K.C.)
5Diamond turning and precision grinding with submicron precision, Asian Industrial Technology Congress (AITC) 1997, AITC Technology Digest : Manufacturing Technology, pp.197-200, 6-8 January, Hong Kong, 1997. CHIU, W.M., LEE, W.B., LEUNG, T.P. and CHEUNG, C.F.
6A study of the issues in relocating a high technology manufacturing plant, Proceedings of Australasia Conference on Technology for Manufacturing, pp.76-83, February, Palmerston North, New Zealand, 1997. CHOI, A.C.K. and (WAN, C.P.T.)
7Implementing negotiation support system: theory and practice, Thirtieth Annual Hawaii International Conference On System Science, Vol II, Information Systems Track - Collaboration Systems and Technology, pp.505-513, 7 -10 January, USA, 1997. CHUNG, W.W.C., LEE, W.B. and CHIK, S.K.O.
8Human centered integrated manufacture for continuous improvement, Proceedings of The Fifth International Conference on Human Aspects of Advanced Manufacturing: Agility & Hybrid Automation, pp.283-286, 7-10 August, USA, 1996. CHUNG, W.W.C., LI, K.C. and CHIK, S.K.O.
9Manufacturing information system toolkit: application template, International Manufacturing Engineering Conference, pp.428-430, 7-9 August, USA, 1996. CHUNG, W.W.C., LI, K.C. and CHIK, S.K.O.
10Co-design an information system for small manufacturing enterprise to compete-in-time Proceedings of the Int. Manufacturing Engineering Conference: 2000 and Beyond, Connecticut, 7-9 Aug., pp.263-265, USA, 1996. CHUNG, WWC, YUNG, K.L, and HO, JIMMY L.K.
11Electroplating of Al based composites for eliminating carbides formation in laser joining, 42nd SAMPE, 4-8 May, Anaheim, California, pp. 783-791, USA 1997. DU, J., YUE, T.M. and MAN, H.C.
12Dynamic characteristic of wire electrode under continuing discharge forces and its effect on machining process. Proceedings of Int. Manuf. Engg., Aug. 7-9, Connecticut USA, pp.47-49, 1996. GUO, Z.N., LEE, T.C., YUE, T.M. and (LAU, W.S.)
The application of genetic algorithm in the planning of FMS system, International Conference on Manufacturing Automation, Vol.1, pp.542-547, April, Hong Kong, 1997. KEUNG, K.W. IP, W.H., LI, Y. and (WANG, D.W.)
13Shop-floor scheduling and data capturing system for autonomous manufacturing island, Proceedings of the International Conference on Manufacturing Automation (ICMA ’97), Vol. 1, pp. 414-419, 28-30 April, Hong Kong 1997. LAM, F. W., MA, Y. J., LEE, W. B. and (ZHANG, S.)
14Constraint-based planar free form shape, International Conference on Manufacturing Automation, pp.685-690, April 28-30, 1997, Hong Kong, University of Hong Kong, Vol.2. LAM, T.W., YU, K.M., and YIP, Y.C.
15Multi-spot excimer laser soldering for fine pitch SMD, Proceedings of the 15th Int. Congress on Applications of lasers & Electro-optics, ppE132-139, 14-17 Oct., Detroit, U.S.A., 1996. LAU, K.H.and MAN, H.C.
16Study on the surface and sub-surface workhardening produced in spade drilling of the ductile materials, International Manufacturing Engineering Conference, Connecticut, U.S.A., pp.528-530, Aug. 1996. LEE, T.C., (LAU, W.S.) and SHEN, Q.
17Lattice rotation in machining of an aluminium single crystal, Proceedings of Eleventh International Conference on Texture of Materials, pp.293-298, September, Xian, China, 1996. LEE, W.B., TO, S. and CHAN, C.Y.
18Development of an intelligent enterprise information system, International Conference on Manufacturing Automation, Vol.2, pp.838-844, April, Hong Kong, 1997. NG, Johnny K.C. and IP, W.H.
19Mathematical model for machining non-conventional milling cutters on CNC machine tools; International Manufacturing Engineering Conference, Connecticut, U.S.A., pp.209-211, Aug. 1996. SHEN, Q., (ZHOU C.X.), LEE, T.C. and (LAU, W.S.)
20Laser bending of Al-based metal matrix composite sheets, Proceedings of the Laser Materials Processing Conference ICALEO'96, pp.124-131, 14-17 October, Michigan, 1996. YAU, C.L., K.C. CHAN and LEE, W.B.
21Application of Taguchi method on laser welding of superduplex stainless steels, Proc. of the15th Int. Congress on Applications of lasers & Electro-optics, pp74-83, 14-17 Oct. 1996, Detroit, USA. YIP, W.M., MAN, H.C. and   IP, W.H.
22Dimension-based parameterized design of free form shape, International Conference on Manufacturing Automation, pp. 347-352, Vol. 1, University of Hong Kong, April 28-30, 1997. YU, K. M. and ZHU, W.M.
23The revised ISO 9000 quality system -- A highway to TQM, Proceedings of International Manufacturing Engineering Conf., pp. 495-497, Aug, USA, 1996. YUNG, K.C.
24A study on the effect of welding parameters and heat input rates on titanium weld's grain size, NAMRC XXV, May 1997, lincoln, Technical papers of North American Manufacturing Research Institute of SME, MS97-192, pp.149-154, 1997. YUNG, K.C., (RALPH, B.) and (FENN, R.)
   
Reviews, translations, and other written outputs  
   
Review of books or software  
   
1Book review on "Elementary Mechanics of Plastic Flow in Metal Forming by S.H. Talbert and Avitzur, John Wiley & Sons Ltd., 1996", Journal of Materials Processing Technology, 66, p.287, 1997. CHAN, K.C.
   
Other written outputs  
   
1A profile of the manufacturing information systems research: a structured implementation methodology. 15 February 1997. CHUNG, W.C.C.
2Benchmarking of IS development research and practice in UK's leading universities. 25 September 1996. CHUNG, W.W.C.
3Case study: implementation of a shipment scheduling program in a reference site: Wing Sang Bakelite Electrical Mfy Ltd. 15 January 1997. CHUNG, W.W.C.,   CHIK, S.K.O. and LEUNG, C.
4Case study: quality function deployment report: Rccom Electric Co Ltd. 17 February 1997. CHUNG, W.W.C., PAK, J.J.F. and TANG, C.
5Consultancy report for Husin Chemical Co. Ltd: Investigation of Manufacturing system design. 5/97. IP, W.H.
6Consultancy report for Tung Hing Plastic Co. Ltd: Feasibility studies of MRPII implementation. 11/96. IP, W.H.
7Consultancy report for Hong Kong NUKABE Co. Ltd.: The design of a computerised production control system. Sept. 1996. LAM, F.W. and WONG, W.C.
8Consultancy report for Legal Aid Department: Expert Witness on industrial accidents. 8/96. LEE, Angela and IP, W.H.
9Automation task force report: Part 1, Productivity mapping of an equipment manufacturer, & Part 2, Manufacturing Information System. July 1996. LEE, T.C. and IP, W.H.
10Productivity evaluation of a chemical manufacturer in China. March 1997. LEE, T.C. and IP, W.H.
11Investigation on the failure of a high speed insulator near the Lo Wu Station. Nov., 1996. LEE, T.C. and MAN, H.C.
12Investigation on the failure of tie rod insulators. Dec., 1996. LEE, T.C. and TANG, C.Y.
13First stage report: Investigation on the failure of the reducing sockets at the Pak Shek Kok section. April 1997. LEE, T.C. and YUE, T.M.
14Consultancy report for the Bank of East Asia Ltd.: Corrosion investigation of Air Conditioning System. May 1997. MAN, H.C.
15Consultancy report for GEC (HK) Ltd., Corrosion analysis of failed components for the ventillation system ductwork in Tate Tunnel. November 1996. MAN, H.C.
16Consultancy report for Talent Focus Ltd., Failure analysis of leadframes. November 1996. MAN, H.C.
17Consultancy report for Water Supplies Department and Kwan On Construction Ltd, Failure analysis of a puddle flange. July 1996. MAN, H.C.
18Consultancy report for JDC Coorporation Ltd, Corrosion Investigation of building fittings in Regalia Garden. January 1997. MAN, H.C., and WONG, T.T.
19Analysis and determination of mechanical testing of cast iron speciments Oct.1996. YEUNG, C.F.
20Failure analysis of AISI scaleless blue tempered springs Oct. 1996. YEUNG, C.F.
21Mechanical properties determination of a powder-metallurgy watch strip Nov 1996. YEUNG, C.F
22Micro-examination of cast iron specimens Sept.1996. YEUNG, C.F.
23Micro-examination of drive spring Feb. 1997. YEUNG, C.F.
24Consulting report to OMC: Failure analysis of crankcase (09/12/96). YUE, T.M.
25Consulting report to OMC: Failure analysis of high pressure die cast Al-crankcase (20/9/96). YUE, T.M.
26Consulting report to OMC: Failure analysis of outboard marine engine components (09/04/97). YUE, T.M.
27Consulting report to OMC: Metallographic study of camshafts and crankshafts (5/8/96). YUE, T.M.
28Consulting report to OMC: Metallographic study of valve retainers (23/8/96). YUE, T.M.
29Consulting report to KCRC: Failure analysis of KCRC rail joint (15/1/97). YUE, T.M., LEE, T.C.
30Assessment report on the development of a scheduling software and a real-time control system for printed circuit board plating lines, December 1996, Hong Kong. YUNG, K.C.
31The design of a paint spraying system, consultancy report written for Ka Shui Metal Moulding MFY. under the Hong Kong Productivity Council’s Industrial Automation Tasks Force.(Aug., 96). YUNG, K.L.
32An in-process monitoring system for continuous improvement, consultancy report written for King Long Industrial Ltd., under the Hong Kong Productivity Council’s Industrial Automation Tasks Force. (Jan., 97.) YUNG, K.L.
   
Editorships and high-level service external to the institution  
   
High-level public or professional service  
   
1Member of the Precision Tooling Training Centre of the Vocational Training Council. CHIU, W.M.
2Chairman, professional group in manufacturing management, management and design section, the institution of electrical engineers, U.K., Hong Kong Center. IP, W.H.
3Honorary secretary of the Professional Group in Manufacturing Management, The Institution of Electrical Engineers (Hong Kong Chapter). KWONG, C.K.
4Member of the plastic industry training board of the Vocational Training Council (VTC). MAN, H.C.
5Member of the machine shop & metal working industry training board of the Vocational Training Council (VTC). YUE, T.M.
   
All other outputs  
   
Films, videos  
   
1Webpage on Manufacturing Information Systems Research (MISR): A Structured Implementation Methodology - http://www.mf.polyu.edu.hk/misr.misrhome.html. 11 January 1997. CHUNG, W.C.C. and MOK, D.
2"Manufacturing Information Systems: Implementation Experiences in Hong Kong", Video taped in PolyU MRS Studio in 5th March 1997, Department of Manufacturing Engineering, The Hong Kong Polytechnic University, 1997. Video tape of half hour. CHUNG, W.W.C
   
Participation in exhibits  
   
1Exhibitor : Manufacturing Information Systems Research: A Structured Implementation Methodology, Hong Kong Technology Exhibition '97, 6-9th Jan 97, H.K Convention and Exhibition Centre. CHUNG, W.W.C.
2Exhibitor: Fine blanking technology, Hong Kong Technology Exhibition '97, 6-9th January 1997, Hong Kong Convention and Exhibition Centre. LEE, T.C
3Exhibitor: Ultra precision machining technology, Hong Kong Technology Exhibition '97, 6-9th January 1997, Hong Kong Convention and Exhibition Centre. LEE, W.B. and CHIU, W.M.
4Exhibitor: Laser materials processing technology, Hong Kong Technology Exhibition '97, 6-9th January 1997, Hong Kong Convention and Exhibition Centre. MAN, H.C. and YUE, T.M.
   
Other outputs  
   
1A Computer-Aided Concurrent Design System, PhD Thesis, 11/1996. KWONG, C.K.
   

 


[Department of Industrial and Systems Engineering] [Outputs and Publications]