Department of Industrial and Systems Engineering


List of Research Outputs by Academic Staff (1997-98)

(Authors not Members of the Department are in bracket)

Scholarly books and monographs  
   
Edited book (editor)  
   
1Industrial Development of Hong Kong and Pearl River Delta-Opportunities and Strategies (in Chinese), Published jointly by the Hong Kong Polytechnic University, The China Development Institute and the Hong Kong Advancement of Science and Technology, 220pp, July, 1997. LEE, W.B., (FENG, S.B.) and (JIANG, W.P.)
2Transactions of Nanjing University of Aeronautics and Astronautics, 15(1), June 1998. (Guest Editors) TSANG, A.H.C., TANG, C.Y. and (HE, N)
3Journal of Quality in Maintenance Engineering, 4(2), 1998. (Guest Editors) TSANG, A.H.C., (JARDINE, A.K.S.) and TANG, C.Y.
4Proceedings of The Second International Conference on Quality and Reliability (ICQR’97), Volume 1&2, The Hong Kong Polytechnic University, 1-3 Sept 1997. ISBN 962-367-217-9, 451; ISBN 962-367-218-7 Tsang, H.C. and TANG, C.Y.
   
Journal articles, book chapters, and other published papers  
   
Chapter in an edited book (author)  
1Towards world Class Manufacture, Industrial Development of Hong Kong and Pearl River Delta-Opportunities and Strategies (in Chinese), Edited by W.B. Lee, S.B. Feng and W.P. Jiang, pp.211-220, July 1997. LEE, W.B.
   
Article for externally refereed journal  
1Volume invariant metamorphosis for axisymmetric shape Using the Haar wavelet, International Journal of Shape Modeling, v3, n1&2, pp.39-50, 1997. #CHEUNG, K.K., YU, K.M. and (HUI, K.C.)
2

Study on the machining mechanism of WEDM with Ultrasonic vibration of the wire. J. of Materials Processing Technology, Vol.69, pp.212-221, 1997.

#GUO, Z.N., LEE, T.C., YUE, T.M. and (LAU, W.S.)
3

A structural approach to the development and implementation of MRPII, Journal on Manufacturing, IES, vol.37(4), pp.56-67, 1997.

#LO, Y.F., IP, W.H. and YUNG, K.L.
4Solid reconstruction from orthographic opaque views using incremental extrusion, Computers & Graphics: An International Journal, v21, n6, pp.787-800, Nov/Dec 1997. #SHUM, S.S.P., (LAU, W.S.), (YUEN, M.M.F.) and YU, K.M.
5Study on the morphology and mechanical properties of Binary and ternary blends of semi-aromatic LCP/PP/PC, Polymers-Plastics Technology & Engineering, vol 37 (2), pp.253-259, 1998. #XU, Q.W., MAN, H.C., and (LAU, W.S).
6Effect of heat treatment on the plastic flow behavior of An aluminium alloy under compressive loading, Journal of Materials Processing Technology, Vol 69, n1-3, pp.90-94, Sep. 1997. #XU, T., LEE, W.B.
7Software architecture for a robotic printed circuit board assembly (PCBA) Rework Cell, Computer Integrated Manufacturing Systems, Vol. 10 (4), pp. 251-259, April 1998. (GEREN, N.), CHAN, C.Y. and (REDFORD, A.H.)
8

Simulation study of CONWIP for a cold rolling plant, International Journal of Production Economics, vol.54(3), pp.257-266, 1998.

(HUNG, M., WANG, D.) and IP, W.H.
9

Earliness/tardiness production scheduling and planning Problem and its solution, International Journal of Production Planning and Control, vol.9(3), pp.275-285, 1998.

(LI , Y., WANG, D.) and IP, W.H.
10Implementation and evaluation of thin-shell rapid prototype, Computers in Industry, v35 n2, pp185-193, Mar 1998. (LI, C.L.), YU, K.M. and LAM, T.W.
11Microstructural studies of QPQ complex salt bath Heat-treated steels, Journal of Materials Processing Technology, Vol 69, pp.45-49, 1997. (LI, H.Y., LUO, D.F.) YEUNG, C.F. and LAU, K.H.
12A comparison of laser cladding Ni-based coating on an aluminium alloy with CO2 and Nd:YAG laser, Int. J. of Plant Engineering and Management, Vol.2, pp.84-90, 1997. LIANG, G.Y., WONG, T.T. MAN, H.C.
13Tensile yield behaviour of glass beads filled LDPE Composites, Metals and Materials, Vol.4, No.3, pp. 265-268, 1998. (Liang, J.Z.), (LI, R.K.Y.), TANG, C.Y. and Wong, T.T.
14A study of entry region length for circular extrusion dies, Journal of Materials Processing Technology, vol.74, pp.223-226, 1998. (Liang, J.Z.), (Sun, X.L.), Tang, C.Y. and (Tang, G.J.)
15

Activity based costing in manufacturing: two case Studies on implementation, International Journal of Integrated Manufacturing Systems, Vol. 9, Issue 3, pp.137-147, 1998.

(SOHAL, A.S.) and CHUNG, W.W.C.
16

An exploration of the hydraulic-pressure assisted redrawing of cups, Journal of Materials Processing Technology, Vol 72, pp.117-123, 1997.

(THIRUVARUDCHELVAN, S.) and TRAVIS, F.W.
17Business process reengineering through information technology and staff empowerment, Quality and Management, Vol. 1, No. 10, pp.14-15, 1997. (WONG, Y.S.) and YUNG, K.C.
18

Spark erosion with ultrasonic frequency, Journal of Materials Processing Technology, v.68, pp.83-88, 1997.

ZHANG, J.H., LEE, T.C., (LAU W.S. and AI, X.)
19Tensile stress induced decomposition of b ’s phase in Zn-Al based alloy, Journal of Materials Science Letters, vol 17, pp.111-114, 1998. (ZHU, Y.H.) and MAN, H.C.
20Influence of extrusion temperature on structure of Eutectoid Zn-Al alloy, Materials and Manufacturing Processes, vol 12, pp.1149-1162, 1997. (ZHU, Y.H.) and MAN, H.C.
21Analysis of limit strains of a high-strain-rate superplatic Al6061/SiCw Composite under equibiaxial tension, Metals and Materials, Vol. 4, pp. 280-282, 1998. CHAN, K.C. and TONG, G.Q.
22High-strain-rate superplasticity of particulate reinforced aluminium matrix composites, International Journal of Mechanical Science, Vol. 40, pp.305-311, 1998. CHAN, K.C. and #HAN, B.Q.
23The cavitation behaviour of a high-strain-rate super-plastic Al6061/20SiC, Scripta Materialia, Vol. 38, pp.1705-1710, 1998. CHAN, K.C. and TONG, G.Q.
24Crystallographic texture in pulse current electroforming of nickel, Textures and Microstructures, Vol. 30, pp.43-53, 1997. CHAN, K.C., QU, N.S. and (ZHU, D. )
25Quantitative texture analysis in pulse reverse current electroforming of nickel, Surface & Coating Technology, Vol. 99, pp. 69-73, 1998. CHAN, K.C., QU, N.S. and (ZHU, D. )
26Hot formability of an Al2009/20SiCw Composite Sheets, Journal of Materials Processing Technology, Vol. 74, pp.142-146, 1998. CHAN, K.C., TONG. G.Q and (GAO, L.)
27

Corrosion behavior of Mg-alloy AZ91 and its MMC in NaCl solution. Corrosion Reviews, Vol. 16, Nos.1-2, pp.43-52, 1998.

CHAN, W.M., CHENG, F.T., LEUNG, L.K., HORYLEV, R.J. and YUE, T.M.

28Large deformation finite element analysis of strain Localization in fine-blanking process, Metals and Materials, Vol.4, No.3, pp. 529-532, 1998. CHEN, Z.H., TANG, C.Y., LEE, T.C. and CHAN, L.C.
29Magnetic and corrosion characteristics of Nd-Fe-B Magnet with various surface coatings, IEEE Transactions On Magnetics, vol 33, No.5, pp.3910-3912, 1997. CHENG, C.W., MAN, H.C. and CHENG, F.T.
30Improvement of protective coating on Nd-Fe-B magnets by pulse nickel plating, Journal of Applied Physics, vol 83(11), pp.6417-6419, 1998. CHENG, C.W., MAN, H.C. and CHENG, F.T.
31

Design and testing of piezoelectric actuator-controlled Boring bar for active compensation of cutting force Induced errors, International Journal of Production Economics, Vol.51, pp.135-148, 1997.

CHIU, W.M. and (CHAN, K.W.)

32Manufacturing Processes Modeling for Environmental Impact Assessment, Journal of Material Processing Technology, Vol. 70/1-3, pp. 231-238, October 1997. CHOI, A.C.K., (KAEBERNICK, H.) and #LAI, W.H.
33

On the Automatic Generation of Product Assembly Sequences, International Journal of Production Research, Vol 36/3, pp. 617-633, March 1998.

CHOI, A.C.K., (ZHA, X.F.), (NG, T.L. and LAU, W.S.)
34An analysis of model I crack based on the continuous dislocation model, Journal of Huazhong University of Science & Technology, Vol. 25, No.8, pp.92-96, 1997. (in Chinese) DENG, Z.X., (DU, K.) and (LI, C.C.)
35

Manufacturing integration strategy using MRPII and RTMS: a case study in South China, Journal of Integrated Manufacturing Systems, 9(1), pp.41-49, 1998.

IP, W.H
36

The successful implementation of MRPII via a Hierarchical modelling approach, Journal of Logistics Information Management, vol.11(3), pp.160-170,1998.

IP, W.H. and (YAM, R.)
37A new algorithm for the assignment problem: an alternative to the Hungarian Method, Computers and Operations Research, Vol. 24, No. 11, pp.1017-1023, 1997. JI, P., LEE, W. B. and (LI, H.)
39Modelling of damage evolution and energy dissipation of polymers with crazes, Journal of Theoretical and Applied Fracture Mechanics,Vol.28, pp.165-174, 1998. JIE, M., TANG, C.Y., (LI, Y.P.) and (LI, C.C.)
40Effect of temperature, pH and sulphide on the cavitation erosion behaviour of super duplex stainless steel, Wear, vol 211, pp.84-93, 1997. KWOK, C.T., MAN, H.C. and LEUNG, L.K.
41Cavitation erosion and damage mechanisms of alloys with duplex structures, Materials Science and Engineering A, vol A242, pp.108-120, 1998. KWOK, C.T., MAN, H.C. and CHENG, F.T.
42Cavitation erosion and pitting corrosion of laser melted stainless steels, Surface Coating and Technology, vol 99, pp.295-304, 1998. KWOK, C.T., MAN, H.C. and CHENG, F.T.
43Blackboard-based approach to concurrent Process design of injection moulding, Journal of Materials Processing Technology, Vol. 70 (Oct), Nos. 1-3, pp.258-263, 1997. KWONG, C.K. and (SMITH, G.F.)
44

A computational system for process design of injection Moulding : combining blackboard based expert system And case based reasoning approach, International Journal of Advanced Manufacturing Technology, Vol. 14, No. 5 (May), pp.350-357, 1998.

KWONG, C.K. and (SMITH, G.F.)
45

Enhancement of plastic injection moulding quality Through the use of the ABLPC nozzle, J. of Materials Processing Technology, vol 69, pp.55-57, 1997.

LAU, K.H.and (TSE, Tony T.M.)
46

A hierarchical evaluation of the solder paste printing Process, J. of Materials Processing Technology, vol 69, pp.79-89, 1997.

LAU, K.H.and YEUNG, W.S.
47

Mechanism of ultrasonic machining of ceramics composites, Journal of Materials Processing Technology, v.71/2, pp.195-201,1997.

LEE, T.C. and #CHAN, C.W.
48

Exploration of shaping conductive ceramic by ultrasonic-Aided wire electrical discharge machining. Materials and Manufacturing Processes, Vol.12, No.6, pp.1133-1148, 1997.

LEE, T.C., #GUO, Z.N., YUE, T.M. and (LAU, W.S.)

49Diamond turning of silicon substrates in ductile-regime, Journal of Materials Processing technology, Vol 73, n 1-3, pp.42-48, Jan. 1998. LEUNG, T.P.,* LEE, W.B. and # LU, X.M.
50Surface treatment of thermoplastic composites with an Excimer laser, International Journal of Adhesion and Adhesives, vol 18, pp.151-157, 1998. MAN, H.C., LI, M, and YUE, T.M.
51The degradation of elastic properties of aluminum alloy 2024T3 due to strain damage, Scripta Materialia, Vol.38, No.2, pp.231-238, 1998. TANG, C.Y., JIE, M., SHEN, W. and Yung, K.C.
52High-strain-rate superplastic gas pressure forming of an Al2009/20SiCw composite, Scripta Materialia, Vol. 37, pp. 1917-1922, 1997. TONG, G.Q and CHAN, K.C.
53A strategic approach to managing maintenance Performance, Journal of Quality in Maintenance Engineering, 4(2), pp.87–94, 1998. TSANG, A.H.C.
54Design and fabrication of intelligent composites based on shape memory alloys, Journal of Materials Processing Technology, vol.69, pp.68-74, 1997. Wei , Z. G., Tang, C.Y. and Lee, W.B.
55Preparation of a smart composite material with TiNiCu shape memory particulates in an aluminium matrix, Materials Letters, vol.32, pp.313-317, 1997. Wei, Z. G., Tang, C.Y., Lee W.B., (Cui, L.S.) and (Yang, D.Z.)
56Investigation on the microstructure of spray coating, Journal of Materials Processing Technology, Vol 68, pp.275-278, 1997. YEUNG, C.F. and (MEI, D.)
57

Laser drilling of liquid crystal polymer composite. Polymer Composites, Vol.19, No.1, pp.11-17, Feb 1998.

YUE, T.M. and CHAN, K.C.
58

Some observations on cleavage fracture in high strength Aluminium alloy 7010. J. of Materials Science Letters. Vol.16, (13), pp.1061-1063, July 1997.

YUE, T.M.
59

Improvement in the corrosion resistance of magnesium ZK60/SiC composite by excimer laser surface treatment. Scripta Materialia, Vol.38, No.2, pp.191-198, Dec. 1997.

YUE, T.M., WANG, A.H., and MAN, H.C

60A financial driven maintenance system with failure mode consideration, Quality Engineering, Vol.10, No.3, pp. 491-497, 1998. YUNG, K.C. Winco and TANG, C.Y.
61Wear and friction properties of laser surface hardened En31 steel, J. of Materials Processing Technology, Vol 69, pp.162-166, 1997. ZHANG, X.M., MAN, H.C. and (Li, H.D.)
   
Article for policy or professional journal  
1Application of fuzzied genetic algorithms in optimizing parameters in a manufacturing system for resource allocation, Annual Journal of the Institute of Industrial Engineers (HK), pp. 11-16, December 1997. CHOY, K. L., LAM, F. W. and LAU, Peter K. H.
2Background and framework of dispersed production Network system, Factory and Design (in Chinese), Vol 5 No.145, pp.40-43, 1997. LEE, W.B.
3The application of communication technologies in Dispersed network manufacturing (in Chinese), Shanghai Machine Tool Quarterly, vol.4, pp.26-29, 1997. MA, Y. J. and LEE, W.B.
4Making quality profitable, Annual Journal of the Institute of Industrial Engineers (HK), Hong Kong, pp.39-44, 1997. YEUNG, V.W.S. and LAU, K.H.
   
Conference and working papers  
   
Invited conference paper  
1Dispersed network manufacturing - a Hong Kong model (Keynote Paper), Proceedings of the 8th International Manufacturing Conference with China (IMCC'98), Singapore, pp. 18-25, 12-14 May 1998. LEE, W. B., LAM, F. W. and CHOY, K. L.
2Global manufacturing- a Hong Kong perspective, CIRP International Symposium-Advanced design Manufacture in the global manufacturing era, August 21-22, Hong Kong, pp.k26-k30, 1997. LEE, W.B. and HO, S.Y.
   
Refereed paper at a conference  
1On-line correction of form errors in precision micro-boring system by a compensatory control technique, Proceedings of 8th International Manufacturing Conf. in China, pp.234-239, May, Singapore, 1998. # GAO D., CHIU, W.M., LAM, F.W. and (YUAN, Z.L.)
2Electroplating of Al-based composites for eliminating carbides formation in laser joining, 42nd SAMPE, 4-8 May, Anaheim, California, USA, 1997, pp.783-791. #DU, J., YUE, T.M. and MAN, H.C.
3

The application of GA in FMS tool selection problem, Proc. of the 31st CIRP International Seminar on Manufacturing Systems, Berkeley, USA, May, pp.236-239,1998.

#KEUNG, K.W. and IP, W.H.
4Data Acquisition and MRPII, Proceedings of the 98 Conference on System Automation and Computer Integrated Engineering, Hong Kong, June, pp.S33-S36,1998. #LEE, K.C., IP, W.H. and YUNG, K.L.
5

Hierarchical object-orientated supervisory monitoring and control for manufacturing enterprises, Proc. of the Advances in Industrial Engineering Applications and Practice, California, USA, Nov, vol.2, pp.1241-1246, 1997.

#LEE, K.C., IP, W.H. and YUNG, K.L.
6

Intelligent supervisory monitoring and control system for automated manufacturing, Proc. of the Fourth International Conference on Manufacturing Technology in Hong Kong, Hong Kong, 30 Nov-3 Dec, CDROM, 1997.

#LEE, K.C., IP,W.H. and YUNG, K.L.
7

The design and implementation of MRPII system for global manufacturing, Proc. of the Advances in Industrial Engineering Applications and Practice, California, USA, Nov, vol.2, pp.823-828, 1997.

#NG, K.C., IP, W.H. and LEE, T.C.
8

A low-cost wireframe-to-solid implementation for reverse engineering, AUTOFACT’97, Nov. 3-6, 1997, Detroit, USA, (CD). Also published as Society of Manufacturing Engineers Technical Paper MS98-159, 1998.

#SHUM, S.S.P., (LAU, W.S.), (YUEN, M.M.F.) and YU, K.M.
9Pre-processing technologies for rapid prototyping and rapid tooling – a survey, CIRP International Symposium – Advanced Design and Manufacture in the Global Manufacturing Era, Hong Kong, pp.802-808, Aug. 21-22, 1997. #ZHU, W.M. and YU, K.M.
10A methodology for integrated management system, Transactions of Nanjing University of Aeronautics and Astronatics, vol.15(1), pp.105-109,1998. (CHAN, Y.K.) and IP, W.H.
11

A systematic analysis and re-design of the logistics of a world-wide manufacturing network, CIRP International Symposium- Advanced Design and Manufacture in the Global Manufacturing Era, Hong Kong, Aug, 1997, pp.448-454, 1997.

(GAO, J.X) and IP, W.H.
12

MRPII system training for management studies, The Fifth International Conference on Modern Industrial Training, Jiana, China, Oct., pp.587-592, 1997

(KAM, K.W) and IP, W.H.
13Contact fatigue test of silicon nitride rollers in roller Bearings, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-218-7, Vol.2, pp.79-82, September, Hong Kong, 1997. (LI, Y.K.), LI, D.H. and TANG, C.Y.
14Course reconstruction and teaching practice of mechanical optimal design and CAD, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-217-9, Vol.1, pp.369-372, September, Hong Kong, 1997. (LIANG, J.Z.), (HUANG, H.Y.), TANG, C.Y. and LI, D.H.
15A reliability analysis on the fatigue strength of mill rollers, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-218-7, Vol.2, pp.267-272, September, Hong Kong, 1997. (LIANG, J.Z.), TANG, C.Y. and LI, D.H.
16A study on the elastic tensile modulus of glass beads filled ldpe composites, Key Engineering Materials, vol. 145-149, pp.817-828, 1997. (LIANG, J.Z.), TANG, C.Y., (LI, R.K.Y.), (TJONG, S.C.) and Yung, K.C.
17Document management for a distributed development environment: From Paper to Intranet, Proceedings of The 3rd International Conference on ISO9000 & TQM, 14–16 April 1998, Hong Kong, pp.184–190. (NG, W.W.L.) and TSANG, A.H.C.
8

Machining of selenium treated stainless steel, Proceeding Of CIRP Symposium-Advanced Design and Manufacture in the Global Manufacturing Era., Hong Kong, v.2. August 1997, pp.779-782.

(SARWAR, M., LAU, W.S.), LEE, T.C. and (CHAN, S.K.)
19Business process reengineering through information technology and staff empowerment, The Second International Conference on Quality and Reliability, Vol, 1, pp. 181-186, September, Hong Kong, 1997. (WONG, Y.S.) and YUNG, K.C.
20

TQM development in Hong Kong’s electronics industry, Proceedings of The Second International Conference on Quality & Reliability, 1-3 September 1997, Hong Kong, vol. 1, pp.161-166.

CHAN, Joseph W. K.

21

Model of enterprise integration process for manufacturing industries in China, Proceedings of the 8th International Manufacturing Conference in China, 12-14 May 1998, Singapore, pp.157-162.

CHAN, Joseph W. K. and CHOY, K.L.

22

Made in Hong Kong: a cultural pearl pursuing for Quality, Transactions of Nanjing University of Aeronautics & Astronautics, Vol. 15, No.1, pp.84-90, June 1998.

CHAN, Joseph W. K.

23Superplastic deformation mechanisms of SiC whisker and particulate reinforced aluminium composites, Proceedings of 11th International Conference on Composite Materials, on CD-ROM, Gold Coast, Australia, 14-18 July 1997. CHAN, K.C. and #HAN, B.Q.
24Production potential analysis of fine blanking vs conventional stamping and its engineering criteria, Proceeding of the Second International Conference on Quality and Reliability, Hong Kong, pp.269-276, Sept 1997. CHAN, L.C., LEE, T.C., #ZHENG P.F. and (CHEUNG, W.M.)
25Quality assessment of fine-blanked and conventional Blanked parts, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-218-7, Vol.2, pp.125-130, September, Hong Kong, 1997. CHAN, L.C., TANG, C.Y., LEE, T.C. and YU, C.H.*
26Simulation of fine-blanking process using large Deformation Fem, Proceedings of the Eighth Int. Manufacturing Conference, ISBN 981-04-0209-0, pp.70-75, May, Singapore, 1998. Chen, Z.H., Tang, C.Y. Lee, T.C. and Chan, L.C.
27The manufacture of high quality aspheric surfaces for optical products, CIRP International Symposium – Advanced Design and Manufacture in the Global Manufacturing Era, pp.37-44, August, Hong Kong, 1997. CHEUNG, C.F., LEE, W.B., CHIU, W.M. and LEUNG, T.P.*
28

Improvement of machining accuracy of cantilever boring bar system using piezoelectric actuator, Transactions of University of Aeronautics and Astronautics, Vol.15, Nol.1, pp.54-58, June 1998.

CHIU, W.M., #GAO, D., LAM, F.W. and (CHAN, K.W.)

29Waste Impact Assessment Modelling for Manufacturing Processes, Proceedings, CIRP Int. Symposium – Advance Design and Manufacture in the Global Manufacturing Era, Aug 1997, Hong Kong, pp.98-105. CHOI, A.C.K. and (KAEBERNICK, H.)
30

Application of fuzzied genetic algorithms based simulation on the design of manufacturing systems, Proceedings of the 8th International Manufacturing Conference in China, 12-14 May 1998, Singapore, pp.226-233.

CHOY, K.L. and CHAN, Joseph W. K.

31An organizational culture for quality through Empowerment management, Transactions of Nanjing University of Aeronautics & Astronautics, Vol.15, pp.130-134, 1998. CHU, K.F.
32Towards the formulation of a practical global manufacturing strategy: a theory-driven empirical research approach, CIRP International Symposium – Advanced Design and Manufacture in the Global Manufacturing Era, Hong Kong, August 21-22, 1997, Vol 1, pp.397-405. CHUNG, W.W.C. LI, K.C. and #CHIK, S.K.O.
33Management of IS/IT assimilation in small manufacturing enterprise: a theory-driven empirical research approach, Proceedings of the World Congress: Manufacturing Technology Towards 2000, Cairns - Australia, 15-17 September 1997, pp.651-660. CHUNG, W.W.C. LI, K.C. and #CHIK, S.K.O
34Implementation of statistical quality control in a small manufacturing enterprise, Proceedings of the 2nd International Conference on Quality and Reliability, 1-3 September 1997, Hong Kong, Vol 2, pp.227-234. CHUNG, W.W.C. #PAK, J.J.F. and #WONG, T.K.
35Adaptation of failure modes and effect analysis in small manufacturing enterprise, Proceedings of the Seventh International Conference on Management of Technology, Orlando, USA, 16-20 February 1998, pp.1822-1833. CHUNG, WALTER W.C. and #PAK, JIMMY J..F.
36General reliability analysis for two-dimensional slopes, Transactions of Nanjing University of Aeronautics and Astronautics, Vol.15, No.1, pp.30-35, 1998. JIE,,M., TANG, C.Y., and LI, D.H.
37Cavitation erosion and corrosion behaviour of laser surface melted 316 stainless steel, 16th International Congress on Applications of Lasers & Electo-optics, San Diego, USA, Nov 97, pp. F98-107. KWOK, C.T., CHENG, F.T. and MAN, H.C.
38

A fuzzy expert system for the assessment of suppliers, Proceedings, 8th International Manufacturing Conference, Singapore, 12-14 May 98, pp. 283-288, 1998.

KWONG, C.K. and YUNG, K.L.
39A study on automating manufacturing information flow for cross-border manufacture, CIRP International Symposium - Advanced Design and Manufacture in the Global Manufacturing Era, HK, Vol. 2, pp. 648-653, 21-22 August 1997. LAM, F. W., LEE, W. B., (ZHANG, S.) and MA, Y. J.
40Quadric surface reconstruction from digitized point data, 8th International Manufacturing Conference in China, May 11-13, 1998, Singapore, pp.128-132. LAM, T.W. and YU, K.M.
41The Measurement and analysis of the wire vibration in ultrasonic aided wire cut machining, Proceedings of the International Conference on Precision Engineering, Taiwan, Nov 1997, pp.677-683. LEE, T.C., YUE, T.M., (LAU, W.S.) and #GUO Z.N.
42Surface integrity and modification of electro-discharge machined engineering ceramics, Proceeding of the 11th International Conference on Surface Modification Technologies, Sept 8-10, pp.388-396, 1997, France. LEE, T.C., ZHANG, J.H. and LOK, Y.K.
43Machining mechanism and surface integrity of ultrasonic machining, The Fourth International Conference on Composite Engineering, Hawaii, USA, pp.589-590, 1997. LEE, T.C., ZHANG, J.H. and (LAU, W.S.)
44Grinding of hot pressed aluminum oxide based engineering ceramic with diamond wheel, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-217-9, Vol.1, pp.207-213, September, Hong Kong, 1997. LEE, T.C., Zhang, J.H. and TANG, C.Y.
45Strengthening of wire electro-discharge machined SiAlON ceramic by quenching, Key Engineering Materials, vol. 145-149, pp. 1173-1178, 1997. LEE, T.C., ZHANG, J.H. and TANG, C.Y.
46Evolution of orientation hardening in the cold rolling of an AA3003 aluminium alloy sheet, Key Engineering Materials, Vols.145-149, pp.1161-1166, 1998. LEE, W.B. and #WEN, X.Y.
47Ultra-precision diamond turning of ductile & brittle single crystals, International Conference on Precision Engineering, 18-20 November, pp.407-412, Taipei, Taiwan, 1997. LEE, W.B., #TO, S. and #LU, X. M.
48Mechanical properties of a NiTi-based smart composite, Key Engineering Materials, vol. 145-149, pp. 931-936, 1997. LEE, W.B., JIE, M. and TANG, C.Y.
49Reliability analysis of ceramic roller bearings with Multiple failure modes, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-218-7, Vol.2, pp.351-354, September, Hong Kong, 1997. LI, D.H., (Chen, J.P.), TANG, C.Y. and TSANG, H.C.
50Determination of the optimum partial factors in structural reliability analysis, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-218-7, Vol.2, pp.293-296, September, Hong Kong, 1997. LI, D.H., TANG, C.Y., JIE, M., TSANG, H.C. and (LI, C.C.)
51Improving elevator maintenance performance: work study approach, Transactions of Nanjing University of Aeronautics & Astronautics, Vol. 15, No.1, pp.47-53, June 1998. LUK, S.F., TSANG, A.H.C. and (LEUNG, H.C.)
52Application of electrolytic surface-hardening by pulse current in aqueous solution, The Eighth International Manufacturing Conference, pp.76-81, 12-14 May, 1998, Singapore. LUK, S.F., LEUNG, T.P.*, (MIU, W.S. and PASHBY, I.)
53Cavitation erosion-corrosion behaviour of various Engineering alloys in 3.5% NaCl solution, Proceedings of the International Symposium on Ship Building and Ship Repairing, 25-27 September, Guangzhou, China, 1997, pp 81-89. MAN, H.C., KWOK, C.T. and CHENG, F.T.
54Behaviour of supersonic and subsonic gas jets inside laser cut kerfs, 16th International Congress on Applications of Lasers & Electro-optics, San Diego, USA, Nov 97, pp. B27-36. MAN, H.C., DUAN, J. and YUE, T.M.
55Development of an anisotropic elasto-plastic damage model for fracture limit prediction, Proceedings of the Eighth International Manufacturing Conference, ISBN 981-04-0209-0, pp.55-60, May, Singapore, 1998. Tang , C.Y., Shen, W., Lee, T.C. and #Fung, L.C.
56

Mechanical properties of glass beads filled Polypropylene composites, Key Engineering Materials, vol. 145-149, pp. 823-828, 1997.

TANG, C.Y., (LIANG, J.Z.), YUNG, K.C., (LI, R.K.Y.) and (TJONG, S.C.)
57

Prediction of fracture limits of sheet metals by using a damage mechanics criterion, Key Engineering Materials, vol. 145-149, pp.453-458, 1997.

TANG, C.Y., (TAI, W.H.), #FUNG, L.C. and LEE, T.C.
58

Prediction of the effect of craze damage on apparent elastic properties of polystyrene by FEM, Key Engineering Materials, vol. 145-149, pp. 249-254, 1997.

Tang, C.Y., CHAN, L.C., JIE, M. and YU, C.H.*
59Optical methods for 3D object measurement, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-218-7, Vol.2, pp.119-124, September, Hong Kong, 1997. TANG, C.Y., GAO, Z.Y. and LEE, W.B.
60Damage evolution and energy dissipation in the crazing of polymers, Key Engineering Materials, vol. 145-149, pp. 459-464, 1997. TANG, C.Y., JIE, M. and LEE, W.B.
61Development of an interactive multimedia labware: An Integrated Approach, Proceedings of the International Conference on Quality and Reliability, ISBN962-367-217-9, Vol.1, pp.373-379, September, Hong Kong, 1997. TANG, C.Y., LEE, T.C., #TSUI, C.P. and #TSUI, C.W.
62The effects of the material anisotropy on shear Measurement, Proceedings of the Eighth International Manufacturing Conference, ISBN 981-04-0209-0, pp.93-97, May, Singapore, 1998. Tang, C.Y., Yung, K.C., Chen, Z.H. and Peng, L.H.
63Damage of particle toughened thermoplastics: a micro-macro investigation, Proceedings of the International Conference on Composites Engineering, pp.973-974, July, USA, 1997. Tang, C.Y., Zhu, X.G., Choy, C.L., Lee, T.C. and Qiao, F.
64TPM implementation in China: A case study. Proceedings of the 2nd Int. Conference on Quality & Reliability, Hong Kong, 1–3 September 1997, 2, 493–500. TSANG, A.H.C. and #CHAN, P.K.
65Managing the maintenance performance of an electric utility through the use of balanced scorecards, Proceedings of the 3rd International Conference of Maintenance Societies, Adelaide, Australia, 19–21 May 1998, Paper 22, pp.1–10. TSANG, A.H.C. and (BROWN, W.L.)
66Managing human resources for retail service quality, Transactions of Nanjing University of Aeronautics & Astronautics, Vol.15, pp.78-83, 1998. YEUNG, V.W.S. and TSIM, Y.C.
67

Integration of marketing and quality strategies for profit maximization, Proceedings of International Conference on Quality and Reliability, Hong Kong, Vol. 1, pp.81-90, 1997.

YEUNG, V.W.S. and LAU, K.H.
68Planning for delivery allowance in Pearl River Delta Region of Mainland China, Proceedings of International Conference on Quality and Reliability, Hong Kong, Vol. 1, pp.257-268, 1997. YEUNG, V.W.S. and CHOY, K.L.
69The necessity and sufficiency analysis of a minimal modular fixture system, 8th International Manufacturing Conference in China, May 11-13, 1998, Singapore, pp.133-138. YU, K.M. and LAM, T.W.
70Low-cost virtual reality manufacturing education, the 5th International Conference on Modern Industrial Training, Oct. 26-29, 1997, Jinan, Shandong, China, pp.35-42. YU, K.M., #CHAN, K.W., #LAU, F.H., #LAW, C.C. and #LUK, F.
72Destructive reverse engineering, 4th International Conference on Manufacturing Technology in Hong Kong, Nov. 30-Dec. 3, 1997, (CD). YU, K.M., #LEE, Y.W. and #NGAI, H.B.
73Optometric aided improvement of a consumer product using finite element analysis, 4th International Conference on Manufacturing Technology in Hong Kong, Nov. 30-Dec. 3, 1997, (CD). YUEN, C.C., LAM, T.W., LAM, C.L. and YU, K.M.
74Quality mission and approach in manufacturing – a Hong Kong perspective, Transaction of Nanjing University of Aeronautics and Astronautics, Vol.15(1), pp.97-104, 1998. YUNG, K.C.
75The pros and cons of the revised ISO 9000 as a good quality system, The Second International Conference on Quality and Reliability, Vol.2, pp.29-34, September, Hong Kong, 1997. YUNG, K.C. and TANG, C.Y.
76The role of information technology and human factor in business process reengineering – A case study, The World Manufacturing Congress (ISMM), pp.38-42, November, New Zealand, 1997. YUNG, K.C.
77Internal customer satisfaction through internal process improvement, The Second International Conference on Quality and Reliability, Vol, 1, pp.241-248, September, Hong Kong, 1997. YUNG, K.C. and (CHUEK, T.T.L.)
78

Passive self adapting end-effectors for blind grappling on Mars soil, Proceedings of the 7th European Space Mechanisms & Tribology Symposium, ESTEC, Noordwijk, The Netherlands, 1-3 Oct 1997, pp.145-150.

YUNG, K.L., (NG, T.C.) (CHAN, C.C.) and YU, C.H.*
   
Other conference paper  
1Machine-part grouping techniques for cellular manufacturing, Proceedings of the 5th Guangdong- Hong Kong Symposium on Advances in Mechatronic Research and Industrial Development, China, June 1998, pp.10-21. #CHAN, W.M. and CHAN, C.Y.
2Research on the methodology of concurrent engineering, Proceedings of the 5th Guangdong-Hong Kong Symposium on Advances in Mechatronic Research and Industrial Development, China, June 1998, pp.195-206. (Chinese) CHAN, C.Y., FANG, S.L., IP, W.H. and (QI, G.N.)
3Tailored logistics strategy for a global manufacturing corporation (GMC) engaging in the production of mechatronic products. Proceedings of The 5th Guangdong-Hong Kong Symposium on Advances in Mechatronic Research and Industrial Development, China, 14-16 June, 1998, pp.33-41. CHAN, W.K. and YUNG, K.L.
4In-process error compensation in boring operation, The Fifth Guangdong-Hong Kong Symposium on Advances in Mechatronics Research and Development, pp.334-344, June, Zhuhai, China, 1998. CHIU, W.M., # GAO D., LAM, F.W. and (YUAN, Z.L.)
5Empirical based information system development research: a case study, Working Paper No 05/97-8, BIS, PolyU, 1997 CHUNG, W.W.C., CHENG, T.C. EDWIN and (CHOI, DORIS H.L.)
6Philosophy on management of technology case clearinghouse, University of Missouri - Rolla, March 13, 1998. CHUNG, W.W.C.
7Extended product data management, Proceedings of the 5th Guangdong-Hong Kong Symposium on Advances in Mechatronic Research and Industrial Development, China, June 1998, pp. 184-194. (Chinese) FANG, S.L., CHAN, C.Y., (WU, H.F.) and IP, W.H.
8The architecture of a new configurable software on generic shop floor monitoring and control system. Proceedings of The 5th Guangdong-Hong Kong Symposium on Advances in Mechatronic Research and Industrial Development, China, 14-16 June, 1998, pp.320-333. YUNG, K.L. and (XU, S.)
9On-line injection parameter estimation by imprecise melt flow modeling. Proceedings of The 5th Guangdong-Hong Kong Symposium on Advances in Mechatronic Research and Industrial Development, China, 14-16 June, 1998, pp.22-32. YUNG, K.L. and LAU, K.H.
   
Works of fiction, consulting reports, case studies, & etc  
   
Consulting or contract research reports  
1The Profile of MISR Project, Report to ITDC CHUNG, W.W.C.
2Accomplishments of MISR Project for ITDC, Industry Department, The HKSAR, June 1998 CHUNG, W.W.C.
   
Written teaching case study or extensive note  
1Case Study: Desktop MRP: Smart Use of BOM CHUNG, W.W.C.
   
Reviews, translations, and other written outputs  
   
Other written outputs  
1A report on the definition of industrial use to a solicitor firm (Dec 1997) LEE, W.B.
2Failure analysis of a thermit-welded rail joint-Consulting report to KCRC (8/4/98) YUE, T.M.
3Metallography of ajustment screw –consulting Report to OMC (12/9/97) YUE, T.M.
4Assessment report on a research to study the Methodology of forming micro-via in the Manufacture of multi-layer tape substrate for CSP (June 1998) YUNG, K.C.
   
Editorships and high-level service external to the institution  
   
High-level public or professional service  
1Member of the Metals Training Board of the Vocational Training Council (VTC) CHAN, K.C.
2Professional Assessment Coordinator, Manufacturing & Industrial Engineering Discipline, The Hong Kong Institution of Engineers CHIU, W.M.
3Interview Convenor, Institution of Electrical Engineers, UK CHIU, W.M.
4Organizing Committee and Judging Panel, Student Project Competition, MIE Division, The Hong Kong Institution of Engineers CHOI, C.K.
5Chairman, Professional Group in Manufacturing Management, Management and Design Section, The institution of electrical engineers, U.K., Hong Kong Center IP, W.H.
6Vice-Chairman of the Hong Kong Association of Science & Technology LEE, W.B.
7Chairman of the Manufacturing & System Engineering Group, the Institute of Electrical Engineers, Hong Kong LEE, W.B.
8Member of the Plastic Industry Training Board of the Vocational Training Council (VTC) MAN, H.C.
9External Examiner (Materials Engineering & Science) Open University of Hong Kong MAN, H.C.
10Served as Member of the Hong Kong Institute of Engineers Accreditation Team YUNG, K. L.
11Served as External Examiner of Department of Manufacturing Engineering, Hong Kong Technical College (Chai Wan & Tsing Yi) YUNG, K. L.
12Vice-Chairman, Professional Group in Manufacturing Management, Specialised Section in Management and Design, The Institute of Electrical Engineers, U.K., Hong Kong YUNG, K.C.
13Honorary Treasurer, The Hong Kong Society for Quality, Hong Kong YUNG, K.C.
   
All other outputs  
   
Films, videos  
1Growth of a small manufacturing enterprise and critical factors for success, Video taped by PolyU MRS on 22nd December 1997, Department of Manufacturing Engineering, PolyU, 1997. (Video tape of half hour) CHUNG, W.W.C
2"Ultra-precision Machining Centre", Department of Manufacturing Engineering, The Hong Kong Polytechnic University, 1997. Video tape of half hour. LEE, W.B.
   
Participation in exhibits  
1Technology for Tomorrow – Hi Tech Research: Implementation of Ultra-Precision Machining Technology, 28 June-4th July, 1997, City University of Hong Kong. CHIU, W.M.
   
Other outputs  
1Received the 1997 Hong Kong Awards for Industry, Federation of Hong Kong Industries Certificate of Merit in Consumer Product Design. YUNG, K. L., NG, T.C. and YU, C.H.
2Control and Qualification of Titanium Welds, PhD Thesis, 3/1998 YUNG, K.C.

 


[Department of Industrial and Systems Engineering] [Outputs and Publications]