Department of Industrial and Systems Engineering


List of Research Outputs by Academic Staff (1998-99)

(Authors not Members of the Department are in bracket)

Scholarly Books and Monographs  
   
Edited book (editor)  
   
1

Proceedings of Nano-metrology in Precision Engineering, The Hong Kong Polytechinc University, 24-25 Nov 1998, ISBN 962-367-239

LEE, W.B. and (XU, Y.)
2

Industrial Policy and Technology Transfer – An Asia-Pacific Perspective, pp. 95, Nov 1998, ISBN 962-367-230-6

LEE, W.B. and (LO, W.K.)
   
Journal Articles, Book Chapters, and other Published Papers  
   
Chapter in an edited book (author)  
   
1

Towards world class manufacturing, Industrial Policy and Technology Transfer – An Asia-Pacific Perspective, pp. 5-19, November, 1998

LEE, W.B.
2

Computer-aided design and manufacturing, in Handbook of Technology Management, R. Dorf (Ed.), CRC Press LLC/IEEE Press, pp.13-64 to 13-68, 1999

NOORI, H.
3

Success in AMT implementation and quality enhancement: is there a link?" in Handbook of Total Quality Management, Christian Madu (ed.), Kluwer Academic Publishers, 1999, pp. 225-244

NOORI, H., (MICHELA, J. and JHA, S.)
   
Article for externally refereed journal  
   
1

The establishment of an integrated management system-a paradigm for railway engineering management, The TQM Magazine, vol.10(6), pp. 420-424, 1998

(CHAN, Y.K., GAFFNEY, P.) (NEAILEY, K.) and IP, W.H.,
2

ISO9004-2 quality management system – the way to world-class service, Managing Service Quality, vol.8(6), pp. 395-401, 1998

(CHAN, Y.K., NEAILEY, K.) and IP, W.H.
3

A simulation and comparative study on CONWIP, Kanban and MRP production control systems in a cold rolling plant, Production Planning and Control, vol.9(8), pp. 803-812, 1998

(HUANG, M., WANG, D.) and IP, W.H.
4

An automatic process planning system for quick generation of manufacturing process plans directly from CAD drawings, Journal of Materials Processing Technology, Vol. 87, Issue 1-3, March, pp. 97-106, 1999

(JIANG, B.), LAU, H.C.W and (CHAN, F.T.S.)
5

Mechanical properties of polypropylene/CaCO3 composites, Metals and Materials, Vol.4, No.4, pp. 616-619, 1998

(Liang, J.Z.), TANG, C.Y. (LI, R.K.Y.) and WONG, T.T.
6

A hybrid genetic algorithm for a type of non-linear programming problem, International Journal of Computers and Mathematics with Application, vol.36(5), pp. 11-21, 1998

(TANG, J., WANG, D.), IP, W.H. and (FUNG, R.Y.K)
8

Development of a fuzzy push delivery scheme for internet sites, Expert Systems, Vol.16, No. 2, pp. 103-114, 1999

(TSO, S.K.), LAU, H.C.W, (IP, R.W.L.)
9

A framework for developing agent-based collaborative service support system in a manufacturing information network, Engineering Applications of Artificial Intelligence, Vol 12, pp. 43-57, 1999

(TSO, S.K.), LAU, H.C.W, (HO, J.) and (ZHANG, W.J.)
10

Ultrasonic-aided laser drilling of particle reinforced Al-based composites, Materials Science and Technology, Vol 14, pp. 1039-1044, 1998

CHAN, T.W, YUE, T.M. and MAN, H.C.
11

The development of an enterprise resources planning system using a hierarchical design pyramid, Journal of Intelligent Manufacturing, vol.9, pp. 385-399, 1998

NG, Johnny K.C., IP, W.H. and LEE, T.C.,
12

The strategic design and development of ERP and RTMS, Computer and Industrial Engineering, vol.34(4), pp. 777-791, 1998

NG, K.C. and IP, W.H.
13

Surface finish optimization in pulse reverse current electroforming, Plating and Surface Finishing, Vol. 86, pp. 125-129, 1999

WONG, K.P., CHAN, K.C. and YUE, T.M.
14

Effect of third component on the morphology and mechanical properties of liquid crystalline polymer and polypropylene in-situ composites, Composites Science and Technology, Vol 59, pp. 291-196, 1999

XU, Q.W., MAN, H.C. and (LAU, W.S.)
15

Laser bending of leadframe materials, Journal of Materials Processing Technology, Vol. 82, pp. 117-121, 1998

YAU, C.L., CHAN, K.C. and LEE, W.B.
16

Effect of anisotropy on springback of integrated circuit leadframes, Journal of Materials Engineering and Performance, Vol. 8, pp. 368-374, 1999

CHAN, K.C. and WANG, S.H.
17

Effect of current waveform on the deposit quality of electroformed nickels, Journal of Materials Processing Technology, Vol. 89-90, pp. 447-450, 1999

CHAN, K.C. , CHAN, W.K. and QU, N.S.
18

Modelling the effect of plastic anisotropy on springback of integrated circuit leadframes, Textures and Microstructures, Vol. 31, pp. 85-95, 1998

CHAN, K.C. and WANG, S.H.
19

Crystallographic textures and magnetic properties of electroformed nickel, Journal of Applied Electrochemistry, 28, pp. 1095-1099, 1998

CHAN, K.C., QU, N.S. and (ZHU, D.)
20

Experimental study on the shearing behaviour of fine-blanking versus bar cropping, J. of Materials Processing Technology, Vol. 80-81, pp. 126-130, 1998

CHAN, L.C., LEE, T.C., WU, B.J. and CHEUNG, W.M.

21

A study of strain localization in fine-blanking process using large deformation finite element method, Journal of Materials Processing Technology, Vol.86, pp. 163-167, 1999

Chen, Z.H., Tang, C.Y., Lee, T.C. and Chan, L.C.
22

Corrosion protection of Nd-Fe-B magnets by Bismaleimide coating, Journal of Applied Physics, Vol 85, pp. 5690-5692, 1999

CHENG, F.T., MAN, H.C., CHAN, W.M., CHENG, C.W. and CHAN, W.O.
23

A comparison of MTM and RTM, Work Study, Vol 48, Number 2, pp. 57-61, 1999

CHOI, C.K. and IP, W.H.
24

An education and training model for manufacturing resource planning, International Journal of Engineering Education, vol.14(4), pp.248-256, 1998

IP, W.H. and (KAM, K.)
25

An algebraic approach for dimensional chain identification in process planning, International Journal of Production Research, Vol. 37, No.1, pp. 99-110, 1999

JI, P.
26

Laser surface modification of UNS S31603 stainless steels using NiCrSiB alloy for enhancing cavitation erosion resistance, Surface and Coatings Technology, Vol 107, pp. 31-40, 1998

KWOK, C.T., CHENG, F.T. and MAN, H.C.
27

Cavitation erosion of duplex and superduplex stainless steels, Scripta Materialia, Vol 39, pp. 1229-1236, 1998

KWOK, C.T., MAN, H.C. and CHENG, F.T.
28

Octree reinforced thin shell objects rapid prototyping by fused deposition modeling, International Journal of Advanced Manufacturing Technology, v14, n9, pp. 631-636, 1998

LAM, T. W., YU, K. M., CHEUNG, K. M. and (LI, C. L.)
29

The new role of intranet/internet technology for global manufacturing, Engineering with Computers, Vol. 14, pp. 150-155, 1998

LAU, H.C.W,
30

Monitoring quality of components by fuzzy control principle, International Journal of Reliability, Quality and Safety Engineering, Vol. 5, No.2, pp. 133-145, 1998

LAU, H.C.W,
31

Development of an intelligent task management system in a manufacturing information network, Expert System with Applications, Vol. 15, pp.165-179, 1998

LAU, H.C.W, (TSO, S.K.) and (HO, J.)
32

A decision support system for a jewellery manufacturer, International Journal of Production Economics, Vol. 60/61, pp. 211-219, 1999

LAU, H.C.W, (WONG, T.N.) and (CHEUNG, C.H.)
33

Generic methodology for integration of manufacturing information systems, Int. J. of Computer Applications in Technology, Vol. 11, No. 6, pp. 454-464, 1998

LAU, H.C.W., (CHAN, F.T.S.) and (IP, R.W.L.)
34

Neural-fuzzy modelling of plastic injection molding machine for intelligent control, Expert System with Applications, Vol.17, pp. 33-43, 1999

LAU, H.C.W., WONG, T.T. and (PUN, F.)
35

Dispersed network manufacturing – a Hong Kong model, Chinese Journal of Mechanical Engineering, Volume 34, No. 6, pp.102-108, December 1998

LEE, W. B., LAM, F. W. and MA, Y. J.
36

Multi-agent modeling of dispersed manufacturing network, Expert System with Applications, Vol. 16, No. 3, pp. 297-306, 1999

LEE, W.B. and LAU, H.C.W
37

Material induced vibration in ultra-precision machining, Journal of Materials Processing Technology, Vol.89-90, pp. 318-325, May 1999

LEE, W.B., CHEUNG, C.F. and TO, S.
38

Deformation band formation in metal cutting, Scripta Materialia, Vol. 40, no.4 pp. 439-443, January 1999

LEE, W.B., TO, S. and (CHAN, C.Y.)
39

Determination of the optimum partial factors in structural reliability analysis, International Journal of Reliability, Quality and Safety Engineering, Vol.5, No.2, pp. 169-180, 1998

LI, D.H., TANG, C.Y., JIE, M., TSANG H.C. and TSIM Y.C.
40

Genetic algorithm approach to earliness and tardiness production scheduling and planning problem, International Journal of Production Economics, vol.54(1), pp. 65-76, 1998

LI, Y., IP, W.H. and (WANG, D.)
41

Development of electrolytic heat-treatment in aqueous solution, Journal of Material Processing Technology, Vol.84/1-3, pp. 189-192, December 1998

LUK, S.F., LEUNG, T.P., (MIU, W.S. and PASHBY, I.)
42

A study of the effect of average preset voltage on effective case depth during electrolytic surface-hardening, Materials Characterization, Vol.42/2-3, pp. 65-71, April 1999

LUK, S.F., LEUNG, T.P., (MIU, W.S. and PASHBY, I.)
43

Dynamic characteristics of gas jets from subsonic and supersonic nozzles for high pressure gas laser cutting, Optics and Laser Technology, Vol 30, pp. 497-509, 1998

MAN, H.C., DUAN, J. and YUE, T.M.
44

Application of the umbrella methodology to electric vehicles, Int. Journal of Technology Management, Vol. 17, No. 5, pp. 563-579, 1999

NOORI, H., (MUNRO, H.) (DESZCA, G.) and (McWILLIAMS, B.)
45

Developing the right breakthrough product/service: an umbrella methodology, Int. Journal of Technology Management, Vol. 17, No. 5, pp. 544-562, 1999

NOORI, H., (MUNRO, H.,) (DESZCA, G.) and (McWILLIAMS, B.)
46

A damage-based criterion for fracture prediction in metal forming process: A case study in Al2024T3 sheet, Journal of Materials Processing Technology, Vol.89-90, pp. 79-83, 1999

TANG, C.Y., SHEN, W. and LEE, T.C.
47

Deformation behaviour of a PM Al6013/15SiCp composite sheet at elevated temperature, Materials Letters, Vol. 38, pp. 326-330, 1999

TONG, G.Q. and CHAN, K.C.
48

Stress analysis of finite composite laminate with multiple loaded holes, Int. J. of Solid and Structures, Vol 36, pp. 919-931, 1999

XU, X.W., YUE, T.M. and MAN, H.C.
49

The effect of homogenization on the recrystallization behaviour. Journal of Materials Processing Technology, Vol. 82/1-3, pp. 102-106, 1998

YEUNG, C.F. and LEE, W.B.
50

The morphology of solidification of thin section ductile iron castings: A color metallographic study, Journal on Materials Characterization, Vol. 40, no 4-5, pp. 201-208, 1998

YEUNG, C.F., ZHAO, H. and LEE, W.B
51

High power Nd-YAG laser welding of SiC particle reinforced aluminum alloy 2124, Materials Science and Technology, Vol 14, pp. 906-911, 1998

YUE, T.M., DU J.H. and MAN, H.C.
52

Dynamic response of the wire electrode in electrical discharge machining under continuous discharge forces. Int. J. for Manufacturing Science & Production, Vol.1, No.3, pp. 209-218, 1998

YUE, T.M., LEE, T.C., GUO, Z.N. and (LAU, W.S.)
53

The effect of excimer laser surface treatment on corrosion resistance of aluminium 2009/SiCw composite, Materials Letters, Vol. 39, pp. 274-279, 1999

YUE, T.M., MEI, S.M., CHAN, K.C. and MAN, H.C.
54

Excimer laser ablation of glass fibre reinforced liquid crystal polymer. J. Laser Applications, Vol.11, no.1, pp. 27-31, Feb (1999)

YUE, T.M., MEI, S.M. and CHAN, K.C.
55

Corrosion resistance enhancement of magnesium ZK60/SiC composite by Nd:YAG laser cladding, Scripta Materialia, Vol 40 (3), pp. 303-311, (Feb) (1999)

YUE, T.M., WANG, A.H. and MAN, H.C.
56

Excimer laser surface glazing of magnesium ZK60/SiC composite. Lasers in Engineering, Vol.8, pp. 133-144, 1999

YUE, T.M., WANG, A.H. and MAN, H.C.
57

Laser surface treatment of aluminium 6031/SiCp composite for corrosion resistance enhancement, Surface and Coatings Technology, Vol 114, pp. 13-18, 1999

YUE, T.M., WU, Y.X. and MAN, H.C.
58

Improvement in the corrosion resistance of aluminium 2009/SiCw composite by Nd-YAG laser surface treatment, Journal of Materials Science Letters, Vol 18, pp. 173-175, 1999

YUE, T.M., WU, Y.X. and MAN, H.C.
59

Experimental investigation of 355nm Nd:YAG laser ablation of RCC in PCB. Journal of the Institute of Circuit Technology, Vol. 25, Issue 3, pp. 13-17, June 1999

YUNG, K.C., MAN, H.C. and LIU, J.S.
60

A mechanism for the integration of TQM and MRPII, Computer Integrated Manufacturing Systems, vol.11(4), pp. 291-296, 1998

YUNG, K.L., IP, W.H. and CHAN, D.C.K.
61

Creep deformation and microstructural change in extruded Zn-Al based alloy, Metals and Materials, Vol. 4(4), pp. 878-882, 1998

ZHU, Y.H.
62

Microstructural dependence of damping behaviour of eutectoid Zn-Al based alloy (ZA27), J. Materials Science and Technology, Vol. 15(2) March, pp. 178-180, 1999

ZHU, Y.H.
   
Article for policy or professional journal  
1

An assignment problem in PCB assembly, Annual Journal of Institute of Industrial Engineers (Hong Kong), pp. 30-32, 1998.

SZE, M.T. and JI, P.
2

Optimization of computerised cutting system, Textile Asia, vol.30(1), pp. 29-31, 1999

WONG, W.K., CHAN, C.K. and IP, W.H.
   
Conference and Working Papers  
   
Invited conference paper  
   
1

Adaptation of reference site methodology of organizational learning, the Sixth International Conference on Human Aspects of Advanced Manufacturing: Agility and Hybrid Automation, Hong Kong, July 5-8, pp. 85-88, 1998

CHUNG, Walter W.C.

   
Refereed paper at a conference  
   
1

Effect of surface treatment of glass beads on dynamic mechanical properties of filled polypropylene ternary composites, Proceedings of the 2nd East Asian Polymer Conference, pp. 361-362, January, Hong Kong, 1999

(LIANG, J.Z.), TANG, C.Y. (LI, R.K.Y.) and (WONG, A.C.Y.)
2

Phase decomposition in furnace cooled eutectoid Zn-Al based alloy, Proceedings of Int. Conf. On Advances in Materials Processing and Technologies, pp. 89-96, August, Malaysia, 1998

(ZHU Y.H.), MAN H.C., (DORANTES H.J.) and (HERNANDEZ, R.M.)
3

An investigation of residual form error compensation in ultra-precision machining, Proceedings of Symposium on Nano-Metrology in Precision Engineering, pp. 95-102, November, Hong Kong, 1998

CHEUNG, C.F., LEE, W.B., CHIU, W.M. and LEUNG, T.P.
4

Study of machining error model and forecasting compensatory control in precision boring operation, Proceedings of Symposium on Nano-Metrology in Precision Engineering, pp. 178-183, November, Hong Kong, 1998

GAO D., CHIU, W.M., LAM, F.W. and (YUAN, Z.L.)
5

Surface texture measurement and analysis of ultra-precision machining of single-crystal aluminium, Proceedings of Symposium on Nano-Metrology in Precision Engineering, pp. 212-217, November, Hong Kong, 1998

TO, S., ZHAO, B., LEE, W.B. and CHIU, W.M.
6

Enhancing low-speed performance of hybrid stepping motor servo by ripple canceling technique, Proceedings of IEEE International Electric Machine and Drives Conference ’99, Seattle, USA, 9-12 May, 99, pp. 147-149

CHEN, W.D., YUNG, K.L. and CHENG, K.W.
7

Arc-spline based direct toolpath generation from constant z level point cloud input, the 3rd Annual International Conference on Industrial Engineering Theories, Applications and Practice, Hong Kong, 28th-31st December, 1998, pp. 641-649

CHUI, K. L., YU, K. M. and LEE, T. C.
8

A java-based distributed product data management system, the 3rd Annual International Conference on Industrial Engineering Theories, Applications and Practice, Hong Kong, 28th-31st December, 1998, pp. 1094-1103

LEONG, K. K., YU, K. M. and LEE, W. B.
9

Mathematical furnace modeling by smoothing Monte Carlo Method, Proceedings of the 14th Boilers and Pressure Vessels Annual Seminar, November 1998, pp. 59-68

LIU, M.S., CHOI, C.K. and LEUNG, C.W.
10

A general approach for determination of release directions for diecastings, Proceedings of the technical sessions presented by the TMS Aluminum Committee at the 128th TMS Annual Meeting, Light Metals, 28 February-4March, 1999. San Diego, California, pp. 945-950

LU, H.Y. and LEE, W.B.
11

The determination of process parameters for plastic injection molding: case based reasoning approach, Proceedings, the 3rd Annual International Conference on Industrial Engineering Theories, Applications and Practice, Hong Kong, 28-31 Dec. 1998, (on CD-ROM)

MOK, S.L., KWONG, C.K.  and (LAU, W.S.)
12

Effect of the magnetic field on plasma control during CO2 laser beam welding , Proceedings of 17th International Congress on the Application of Lasers and Electro-optics, pp. C268-277, November, Orlando, USA, 1998

TSE, H.C, MAN H.C. and YUE T.M.
13

Relations between texture components, Dislocation density and load instability in a cold rolled AA3003 aluminum alloy sheet, Proceeding of Symposium on Sheet Metal Forming Technology, 28 February- 4 March, 1999, San Diego, California, pp. 233-243

WEN, X.Y. and LEE, W.B.
14

Rapid jewellery prototype making from parametric geometry input, presented in the 3rd Annual International Conference on Industrial Engineering Theories, Applications and Practice, Hong Kong, 28th-31st December, 1998, pp. 692-702.

YOUNG, Y. Y., YU, K. M. and KWONG, C. K.
15

Non-manifold representation for rapid prototyping multi-material, presented in the 7th European Conference on Rapid Prototyping & Manufacturing, Aachen, Germany, 7th-9th July, 1998, pp. 35-47.

ZHU, W. M. and YU, K. M.
16

On-line reducing machining errors in boring operation by forecasting compensatory control technique, Proceedings of Chinese Association of Automation Conference ’98 on Applications of Automation Science and Technology, pp. 38-43, November, Hong Kong, 1998

CHIU, W.M., GAO, D., LAM, F.W. and (YUAN, Z.L.)
17

Process re-engineering for a manufacturer with multi-national operations, Proceedings of the Pacific Conference on Manufacturing, Aug 18-20, 1998, Brisbane, Australia, pp. 623- 628

CHU, K.F.
18

The culture and management of Hong Kong manufacturing industry, Proceedings of the Pacific Conference on Manufacturing, Aug 18-20, 1998, Brisbane, Australia, pp. 595- 600

CHU, K.F. and (CALVERT, J.R.)
19

Mathematical formulation of the component assignment problem in PCB assembly lines, Proceedings of the Eighth International FAIM (Flexible Automation and Intelligent Manufacturing) Conference (FAIM’98), Portland, Washington, USA, pp. 345-353, July 1-3, 1998

JI, P. and SZE, M.T.
20

Implementation of octree reinforcement in hollow rapid prototype, presented in the 7th European Conference on Rapid Prototyping & Manufacturing, Aachen, Germany, 7th-9th July, 1998, pp. 3-18.

LAM, T. W., YU, K. M., CHEUNG, K. M. and (LI, C. L.)
21

An analysis of nano-surface generation in ultra-precision diamond turning, Proceeding of Symposium on Nano-metrology in Precision Engineering, 24-25 November, Hong Kong, pp. 81-92, 1998

LEE, W.B., CHEUNG, C.F., and TO, S.
22

Development of a student self-centered learning package for resource allocation using the Hungarian method, the Proceeding of T & T2 Conference on Integrating Information Technology and Teaching Development, Hong Kong, pp. 1-8, 15 May 1999

LUK, S.F., LAU, K.H. and LAU, K.L.
23

Laser cutting of multiple layers, Proceedings of 17th International Congress on the Application of Lasers and Electro-optics, pp. B140-149, November, Orlando, USA, 1998

MAN, H.C., DUAN, J. and YUE, T.M.
24

Strain damage of glass beads / polyphenylene oxide composites, Proceedings of the Fifth International Conference on Composites Engineering, pp. 879-880, Las Vegas, USA, July, 1998

Tang, C.Y., TSUI, C.P., (WONG, A.C.Y.), SHEN, W. and LEE, T.C.
25

Tensile properties and their correlation with durometer hardness of glass bead filled polypropylene, Proceedings of the 2nd East Asian Polymer Conference, pp. 109-110, January, Hong Kong, 1999

TANG, C.Y., TSUI C.P. and LEE, T.C.
26

Fracture limit prediction of aluminium alloy sheet by damage mechanics approach, Proceedings of the 4th International Conference on Advances in Materials and Processing Technologies (AMPT’98), ISBN967-924-003-7, Vol.2, pp. 638-644, Malaysia, August, 1998

Tang, C.Y., Shen, W. and Lee, T.C.
27

Application of genetic algorithm on the spreading operation in garment manufacturing, Proc. of the International Conference on Nonlinear Programming and Variational Inequalities, City University of Hong Kong, Dec., 1998, pp. 52-54

WONG, W.K., CHAN, C.K. and IP, W.H.
28

Preparation and Installation of Computerized Cutting System, Proc. Of the Textile Research Symposium, Shizuoka, Japan, Aug.,1998, pp. 240-247

WONG, W.K., CHAN, C.K. and IP, W.H.
29

Changing shape immobilization for machining and assembly, presented in the 3rd Annual International Conference on Industrial Engineering Theories, Applications and Practice, Hong Kong, 28th-31st December, 1998, pp. 678-686

YU, K. M. and LAM, T. W.
30

A model for improvement of internal customer satisfaction, Proceedings of World Innovation and Strategy Conference, pp. 161-166, August, Sydney, Australia, 1998

YUNG, Winco K.C. and TANG, C.Y.
31

Surface integrity of electro-discharge machined syalon ceramics, Proc. Of ICPCG'98, Sept 10-12, 1998, China, pp. 459-462

ZHANG J.H., (AI, X., WU, C.L.) and LEE, T.C.
   
Works of Fiction, Consulting Reports, Case Studies, and etc.  
   
Written teaching case study or extensive note  
1

Programmable Logic Controller – IEC-1131-3 Programming Standard (Teaching materials)

CHAN, C.Y.
   
Reviews, translations, and Other Written Outputs  
   
Other written outputs  
   
1

Consultancy report for the Government Flying Services: Failure analysis of an aircraft component, May 1999

CHAN, K.C.
2

Consultancy report for Hunter Douglas China/Hong Kong Ltd.: Design and implementation of a global communication system, February 1999

LAM, F. W. and (CHEUNG, S. W.)
3

Consultancy report for Kowloon-Canton Railway Corporation: Mid-life assessment of overhead line components, January 1999

LEE, T.C.
4

Consultancy report for Kowloon-Canton Railway Corporation: Metallurgical inspection of the fractured reducing socket, November 1998

LEE, T.C.
5

Consultancy report for Kowloon-Canton Railway Corporation: Mechanical testing of the as cast aluminium sockets, November 1998

LEE, T.C.
6

To give comments on an expert report produced by The Secretary of Justice for court hearing for Robertson Double Lee Solicitor & Notaries

LEE, W.B.
7

Consultancy report for Crown Motors Ltd., Failure investigation of cracked rear axle hub November 1998

MAN H.C.
8

Consultancy report for Wheelock Properties Ltd. Corrosion investigation on bathroom fittings, November 1998

MAN H.C.
9

Review of OED’s application of balanced scorecards, a report submitted to MTRC, 30 pp, December 1998

TSANG, Albert H.C.
10

Consultancy report for Pointsder (MFG) Ltd., Failure analysis of staples by micro-examination and mechanical testing, January 1999

YEUNG, C.F.
11

Consultancy report for YK SEIKI Ltd., Failure analysis of injection machine Tie-bars, December 1998

YEUNG, C.F.
12

Consultancy report for Outboard Marine Corp. Asia Ltd., Failure analysis of high pressure die cast crankcase, August 1998

YUE, T.M.

13

Consultancy report for (Dah Chong Hong (Motor Service Centre) Ltd., Failure analysis of the driving shaft of a 30-ton petrol tanker, February 1999

YUE, T.M.
   
Editorships and Higher-level Service External to the Institution  
   
Journal or series editorship  
   
1

Member, Editorial Board of a series of books on "Quality Transformation", published by CityU and funded by ITDC under project code AF/3/98.

TSANG, Albert H.C.
   
High-level public or professional service  
1

Working Group Member of the Hong Kong Youth Skill Competition – Mechatronics Section

CHAN, C.Y.
2

Member of the Metals Training Board of Vocational Training Council

CHAN, K.C.
3

Member of the Trade Testing Committee on CNC Machining of the Plastic Training Board, Vocational Training Council

CHIU, W.M.
4

Committee Member of the Manufacturing and Industrial Engineering Division of the Hong Kong Institution of Engineers

CHOI, C.K.
5

Chairman, Professional Group in Manufacturing Management, Management and Design Section, The Institution of Electrical Engineers,U.K., Hong Kong Center

IP, W.H.
6

Member of the Plastic Training Board of the Vocational Training Council

MAN, H.C.
7

External Examiner, Higher Certificate in Supervisory & Quality Management, IVE

TSANG, Albert H.C.
8

Discipline Expert, Assessment of HKIE Graduate Training Scheme "A" - Manufacturing & Industrial Engineering: Dunwell Industrial (Holdings) Co., Ltd., June 1999

TSANG, Albert H.C.
9

Discipline Expert, Assessment of HKIE Graduate Training Scheme "A" - Manufacturing & Industrial Engineering: Jing Mei Industrial Ltd., June 1999

TSANG, Albert H.C.
10

Member, Executive Committee of Hong Kong Society For Quality

TSANG, Albert H.C.
11

Vice Chairman, Course Validation Team of IVE(Hong Kong Institute of Vocational Education (Chai Wan)

YUNG, K.L.
12

External Examiner, HD & HC in Manufacturing Engineering, Department of Manufacturing Engineering, Hong Kong Technical College (Chai Wan and Tsing Yi)

YUNG, K.L.
13

Member, BEng Accreditation Team, Hong Kong Institution of Engineers

YUNG, K.L.
   
All Other Outputs  
   
Speech or other prestigious public presentation  
   
1

SFC and ST Languages of the IEC-1131-3 Standard (Speech), MgtTech’99: System Automation & Computer Integrated Engineering, IVE (Tsing Yi), Hong Kong, 30 June 99

CHAN, C.Y.
2

PLC programming using IEC-1131 Standard (Workshop), MgtTech’99: System Automation & Computer Integrated Engineering, IVE (Tsing Yi), Hong Kong, 29 June 99

CHAN, C.Y.
3

A speech entitled "Object-technology for workflow management" presented in Industrial Workflow Reconfiguration for SMEs Forum organized by The Hong Kong Industrial Technology Centre Corporation and the Department of Manufacturing Engineering of The Hong Kong Polytechnic University in May, 1999

LAU, H.C.W
4

Presentation on "A Strategic Approach to Managing Maintenance Performance", at MTRC’s Balanced Performance Scorecard Seminar held in July 1998

TSANG, Albert H.C.
5

Presentation on "Managing Maintenance Performance with Balanced Scorecards", at MTRC’s OED Senior Management Group Meeting held in August 1998

TSANG, Albert H.C.
   
Participation in exhibits  
   
1

Exhibitor : AITC’99 Exhibition, Asian Industrial Technology Congress, 26-29th April 99, Hong Kong Convention and Exhibition Centre

CHIU, W.M.
2

Exhibitor : Tech World ’99 International Expo and Conference, 24-26th March 99, Hong Kong Convention and Exhibition Centre

CHIU, W.M., LEE, T.C., YUNG, Winco K.C. and MAN, H.C.
3

Exhibitor : AITC’99 Exhibition, Asian Industrial Technology Congress, 26-29th April 99, Hong Kong Convention and Exhibition Centre

YUNG, Winco K.C.
   
Patents applied for  
   
1

Electrolytic hardening process, 1999 (approved but U.S. patent no. not yet known)

LUK, S.F., LEUNG, T.P., (MIU, W.S. and PASHBY, I.)
   
Other outputs  
   
1

Process modelling of fine-blanking, PhD Thesis, PolyU, 1998

CHAN, L.C.
2

Surface hardening of AISI 1050 steel by pulse electrolysis in aqueous solution, EngD Thesis, University of Warwick, January 1999

LUK, S.F.

 


[Department of Industrial and Systems Engineering] [Outputs and Publications]